GB/T 32357-2015 PDF English
US$90.00 · In stock · Download in 9 secondsGB/T 32357-2015: Guide for Pollution Control of Waste Electrical and Electronic Products Take-Back and Treatment Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 32357-2015 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Guide for Pollution Control of Waste Electrical and Electronic Products Take-Back and Treatment
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 32357-2015
GB/T 32357-2015: Guide for Pollution Control of Waste Electrical and Electronic Products Take-Back and Treatment
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT32357-2015
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.020.40
Z 05
Guide for Pollution Control of Waste Electrical and
Electronic Products’ Take-Back and Treatment
Issued on: DECEMBER 31, 2015
Implemented on: JULY 1, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Forward ... 3
Introduction ... 4
1 Scope ... 5
2 Normative References ... 5
3. Terms and Definitions ... 5
4 Basic Principles ... 8
5 Basic Requirements for the Pollution Control of Waste Electrical and
Electronic Products’ Take-Back ... 8
6 Basic Requirements for the Pollution Control of Waste Electrical and
Electronic Products’ Treatment ... 9
7 Requirements of Information Management System ... 10
8 Personnel Management Requirements ... 11
Appendix A ... 12
Appendix B ... 14
Appendix C ... 15
Appendix D ... 17
Forward
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard was proposed and under the jurisdiction of National Technical
Committee on Electrical and Electric Products and Systems of Standardization
Administration of China (SAC/TC 297).
Drafting organizations of this Standard. China Household Electric Appliance Research
Institute, Shenzhen GEM Co., Ltd., and Qingyuan Dongjiang Environment Technology
Co. Ltd..
Participating drafting organizations of this Standard. China Quality Certification Centre,
Tsinghua University, Sichuan Changhong Electric Co., Ltd., Shanghai Xin Jinqiao
Environmental Protection Co., Ltd., Huizhou TCL Environmental Protection and
Resource Co., Ltd., Jiangxi Green Beauty Resource Recycling Co., Ltd., Beijing
Hazardous Waste Disposal Center, and Beijing Huaxinluyuan Environmental
Protection Industry Development Co., Ltd..
Chief drafting staffs of this Standard. Tian Hui, Liu Ting, Li Jinping, Liu Tao, Yu
Conghai, Xiang Dong, Luo Mingfei, Ye Wei, Zhang Haitao, Pan Xiaoyong, Yang
Yichen, Song Jianfeng, Yuan Jie, He Yilin, and Shan Mingwei.
Guide for Pollution Control of Waste Electrical and
Electronic Products’ Take-Back and Treatment
1 Scope
This Standard specifies the terms and definitions, basic principles of the pollution
control of waste electrical and electronic products’ take-back and treatment, basic
requirements for the pollution control of the waste electrical and electronic products’
take-back, basic requirements for the pollution control of the waste electrical and
electronic products’ treatment, requirements of information management system, and
personnel management requirements.
This Standard is applicable to the take-back and treatment enterprises of waste
electrical and electronic products, and the industry authorities to regulate and manage
the take-back and treatment activities against the waste electrical and electronic
products; other enterprises can refer to this.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this Standard.
GB/T 18597 Standard for Pollution Control on Hazardous Waste Storage
GB/T 18599 Standards for Pollution Control on the Storage and Disposal Site for
General Industrial Solid Wastes
HJ/T 91 Technical Specifications Requirements for Monitoring of Surface Water
and Waste Water
HJ/T 397 Technical Specifications for Emission Monitoring of Stationary Source
HJ 640 Technical Specifications for Environmental Noise Monitoring-Routine
Monitoring for Urban Environmental Noise
3. Terms and Definitions
The following terms and definitions are applicable to this document.
3.1 Waste electrical and electronic product
It indicates the electrical and electronic products (including all parts, members,
components and etc. consisting of the products) that the owner are no longer to use,
and has been abandoned or discarded, and the disqualified and rejected products
generated during the producing, distributing and using processes.
Note. the definition in Clause 3.2 of GB/T 21474-2008 shall be amended.
3.2 Take-back
It indicates, for the purpose of recovery (3.10), the collection (3.5) and storage (3.6)
activities of the waste electrical and electronic product (3.1).
3.3 Treatment
It indicates decontamination, dismantling, and recycling activities against the waste
electrical and electronic product (3.1).
Note. the definition in Clause 3.9 of GB/T 23685-2009 shall be amended.
3.4 Pollution control
It indicates any measures that is taken for the purposes of reducing or eliminating the
selected parts (3.13) generated in the waste electrical and electronic product, and
other pollutants generated during the recycling and disposal processes.
3.5 Collection
It indicates the collection, classification, and arrangement activities against the waste
electrical and electronic product (3.1).
Note. the definition in Clause 3.3 of GB/T 23685-2009 shall be amended.
3.6 Storage
It indicates, for the purposes of collection (3.5), transportation, disassembly (3.8),
recovery (3.10) and disposal (3.11), temporary storage activities of the waste
electrical and electronic product (3.1) in the particular qualified site.
Note. the definition in Clause 3.4 of GB/T 23685-2009 shall be amended.
3.7 Reuse
It indicates, on the premise of no violating the relevant laws, regulations, and
standards, the waste electrical and electronic product (3.1), or its parts, members,
and components shall be continued to be used for the original purposes, or which is
continued to be used for the original purposes after the maintenance.
4 Basic Principles
4.1 The take-back and treatment activities against the waste electrical and
electronic product shall meet the management requirements of Regulations for
Management of Recycling Disposal of Waste Electric and Electronic Products, and
other relevant laws and regulations.
4.2 On the premise of no violating the relevant laws, regulations or standards, give
priority to the reuse of waste electrical and electronic products and components.
4.3 The environmental protection technologies, circular economy technologies, and
advanced and applicable technologies for comprehensive utilization of the renewable
resources, which are encouraged to develop by China shall be taken.
4.4 The environmental monitoring system against the characteristic pollutants and
pollutant sources during the take-back and treatment of waste electrical and electronic
product shall be established.
4.5 National requirements for labor safety and human health shall be met.
5 Basic Requirements for the Pollution Control of
Waste Electrical and Electronic Products’ Take-Back
5.1 The waste electrical and electronic products shall be collected and stored by
types (see Appendix A); and they shall be identified.
5.2 The waste electrical and electronic products shall not be disassembled during
the recycling process.
5.3 When collect the products containing display, they shall be sorted and stored
according to various display structures, such as cathode ray tube, liquid crystal,
plasma and etc.
5.4 When collect the refrigeration equipment, the integrity of the refrigeration system
shall be checked, and then conduct sorted and separate collection and identification.
During the transporting and storing process of the refrigeration equipment with intact
refrigeration system, necessary protective measures shall be taken for the benefit of
the recycling of refrigerant and compressor lubricant.
5.5 When transporting and storing the products that may contain residual liquid,
necessary measures shall be taken to avoid the leakage of the liquid.
5.6 The transportation tools of the waste electrical and electronic products shall take
the protective measures and water-and-oil-collecting measures to avoid the dropping
6.7 Identify and conduct sorted management for the selected parts (see Appendix C)
generated in the treatment process of the waste electrical and electronic products.
The selected parts in the national hazardous waste list, according to the relevant
provisions of GB 18597, shall be identified and managed as per the hazardous waste.
6.8 Identify and conduct sorted management for the selected treatment parts (see
Appendix D) generated in the treatment process of the selected parts. If the selected
parts can’t be handled independently, then they shall handed-over to relevant
qualified enterprise to dispose or...
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 32357-2015 be delivered?Answer: The full copy PDF of English version of GB/T 32357-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 32357-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 32357-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 32357-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 32357-2015?A step-by-step guide to download PDF of GB/T 32357-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 32357-2015".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|