GB/T 28907-2021 PDF in English
GB/T 28907-2021 (GB/T28907-2021, GBT 28907-2021, GBT28907-2021)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 28907-2021 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Sulfuric acid dew-point corrosion resistance steel plate and strip
| Valid |
| GB/T 28907-2012 | English | 319 |
Add to Cart
|
3 days
|
Sulfuric acid dew-point corrosion resistance steel plates and strips
| Obsolete |
Standards related to (historical): GB/T 28907-2021
PDF Preview
GB/T 28907-2021: PDF in English (GBT 28907-2021) GB/T 28907-2021
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 77.140.50
CCS H 46
Replacing GB/T 28907-2012
Sulfuric acid dew-point corrosion resistance steel plate and
strip
ISSUED ON: AUGUST 20, 2021
IMPLEMENTED ON: MARCH 01, 2022
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions... 7
4 Designation representation ... 8
5 Order contents ... 8
6 Size, shape, weight ... 9
7 Technical requirements ... 9
8 Test methods ... 11
9 Inspection rules ... 12
10 Packaging, marking and quality certificate ... 12
Appendix A (Normative) Corrosion resistance of steel plates and strips ... 13
Sulfuric acid dew-point corrosion resistance steel plate and
strip
1 Scope
This document specifies the designation presentation, order contents, size, shape,
weight, technical requirements, test methods, inspection rules, packaging, marking and
quality certificate of sulfuric acid dew-point corrosion resistance steel plate and strip.
This document applies to sintering machine head, environmental protection flue gas
treatment equipment, chimney and air preheater of power plant, desulfurization device
in metallurgical industry, barn in tobacco industry, transmission tower, railway vehicle,
steel structure in acid corrosion area, and other sulfuric acid dew-point corrosion
resistance hot-rolled single-rolled steel plates whose thickness is not more than 50 mm,
and hot continuous-rolled steel strips and continuous-rolled steel plates whose thickness
is not more than 25.4 mm (hereinafter referred to as steel plates and strips).
2 Normative references
The following documents, in whole or in part, are normatively referenced in this
document and are indispensable for its application. For dated references, only the
version corresponding to that date is applicable to this document; for undated references,
the latest version (including all amendments) is applicable to this document.
GB/T 222, Permissible tolerances for chemical composition of steel products
GB/T 223.5, Steel and iron - Determination of acid-soluble silicon and total silicon
content - Reduced molybdosilicate spectrophotometric method
GB/T 223.11, Iron, steel and alloy - Determination of chromium content - Visual
titration or potentiometric titration method
GB/T 223.14, Methods for chemical analysis of iron, steel and alloy - The N-benzoy-
N-phenylhydroxylamine extraction photometric method for the determination of
vanadium content
GB/T 223.17, Methods for chemical analysis of iron, steel and alloy - The
diantipyrylmethane photometric method for the determination of titanium content
GB/T 223.18, Methods for chemical analysis of iron steel and alloy - The sodium
thiosulfate separation iodometric method for the determination of cupper content
GB/T 709, Dimension shape weight and tolerances for hot-rolled steel plates and
sheets
GB/T 2970, Method for ultrasonic testing of thicker steel plates
GB/T 2975, Steel and steel products - Location and preparation of samples and test
pieces for mechanical testing
GB/T 4336, Carbon and low-alloy steel - Determination of multi-element contents -
Spark discharge atomic emission spectrometric method (routine method)
GB/T 8170, Rules of rounding off for numerical values & expression and judgment
of limiting values
GB/T 17505, Steel and steel products - General technical delivery requirements
GB/T 20066, Steel and iron - Sampling and preparation of samples for the
determination of chemical composition
GB/T 20123, Steel and iron - Determination of total carbon and sulfur content
Infrared absorption method after combustion in an induction furnace (routine
method)
GB/T 20125, Low-alloy steel - Determination of multi-element contents -
Inductively coupled plasma atomic emission spectrometric method
GB/T 20126, Unalloyed Steel - Determination of low carbon content - Part 2:
Infrared absorption method after combustion in an in an induction furnace (With
preheating)
JB/T 7901, Metals materials - Uniform corrosion - Methods of laboratory immersion
testing
3 Terms and definitions
The following terms and definitions are applicable to this document.
3.1
sulfuric acid dew-point corrosion resistance
Add a certain content of alloying elements to the steel, to increase the corrosion
resistance of the sulfuric acid generated by the combination of SO2, SO3 and H2O below
the dew point, when the steel is exposed to sulfuric gas (such as a steel chimney that
emits sulfur-containing waste gas).
4 Designation representation
The designation of steel consists of three parts -- the first letter “Q” of the Chinese
pinyin “Qu” for the word yield in “yield strength”, the specified minimum upper yield
strength value and the first letter “NS” of the Chinese pinyin “Nai Suan” for the word
acid corrosion in sulfuric acid dew-point corrosion resistance.
Example 1: Q355NS. Where:
Q – the first letter of the Chinese pinyin “Qu” for yield in yield strength;
355 – the specified minimum upper yield strength value, in megapascals
(MPa);
NS – the first letter of the Chinese pinyin “Nai Suan” for acid resistance;
When the quality grade of steel is required, the steel quality grade symbol (B, C, D, E)
shall be added after the above designation.
Example 2: Q355NSD.
5 Order contents
5.1 The contract or order ordered according to this document shall include the following
contents:
a) reference to this document;
b) product name (single-rolled steel plate, continuous-rolled steel plate, steel strip);
c) designation;
d) quality grade (if required);
e) specifications and dimensions, unevenness accuracy;
f) edge state (cut edge EC, mill edge EM);
g) delivery status;
h) weight;
i) other requirements.
5.2 The edge state, thickness and unevenness accuracy of steel plates and strips, if not
specified in the contract, shall be chosen by the supplier.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|