Powered by Google www.ChineseStandard.net Database: 189759 (9 Jun 2024)

GB/T 26952-2011 PDF in English

GB/T 26952-2011 (GB/T26952-2011, GBT 26952-2011, GBT26952-2011)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 26952-2011English75 Add to Cart 0-9 seconds. Auto-delivery. Non-destructive testing of welds -- Magnetic particle testing of welds -- Acceptance levels Valid

Standards related to: GB/T 26952-2011

GB/T 26952-2011: PDF in English (GBT 26952-2011)

GB/T 26952-2011
ICS 25.160.40
J 33
Non-destructive testing of welds -
Magnetic particle testing of welds - Acceptance levels
(ISO 23278.2006, MOD)
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 4
4 Testing parameters ... 5
5 Acceptance levels ... 5
Appendix A (Informative) Recommended testing parameters ... 7
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard is modified from ISO 23278.2006 ”Non-destructive testing of welds --
Magnetic particle testing of welds -- Acceptance levels” by redrafting method.
The technical differences between this Standard and ISO 23278.2006 and the
reasons are as follows.
-- For normative references, this standard has made technical adjustments to suit
the technical conditions of our country, which are reflected in Chapter 2, "Normative
references”. The details are.
 Replace EN 1330-7 by GB/T 12604.5 (see Chapter 3);
 Replace ISO/TS 18173 by GB/T 20737 with equivalent international standards
(see Chapter 3);
 Replace ISO 17638 by GB/T 26951, which adopts modified international
standards (see Chapter 1);
 Removed ISO 5817;
 Removed ISO 17635;
 Removed EN 1330-2.
This Standard was proposed by and shall be under the jurisdiction of the National
Welding Standardization Technical Committee (SAC/TC 55).
Drafting organizations of this Standard. Shanghai Test Inspection Technologies Co.,
Ltd., Shanghai Chengyou Group Co., Ltd., Shanghai New Meida Inspection
Equipment Co., Ltd., Tianjin Chengxinda Metal Testing Technology Co., Ltd., Harbin
Boiler Factory Co., Ltd., Shanghai Material Research Institute.
The main drafters of this standard. Zhang Ping, Jin Yufei, Xia Jianguo, Yang Gui,
Zhao Cheng, Wu Qinzhen.
Non-destructive testing of welds -
Magnetic particle testing of welds - Acceptance levels
1 Scope
This Standard specifies the acceptance levels of magnetic particle test indication for
deficiencies in ferromagnetic steel welds.
This acceptance levels are mainly used for manufacturing inspection and, if deemed
appropriate, for in-service inspection.
The acceptance levels in this standard is based on the test capability expected to be
achieved as per the method specified in GB/T 26951 and the parameters
recommended in Appendix A. Acceptance levels are related to welding standards,
application criteria, technical conditions and regulations. More information about the
indicated acceptance levels can be found in the product or application criteria.
2 Normative references
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 12604.5 Non-destructive testing. Terminology. Terms used in magnetic
particle testing
GB/T 20737 Non-destructive testing. General terms and definitions (GB/T
20737-2006, ISO/TS 18173.2005, IDT)
GB/T 26951 Non-destructive testing of welds. Magnetic particle testing (GB/T
26951-2011, ISO 17638.2003, MOD)
3 Terms and definitions
The terms and definitions defined in GB/T 12604.5 and GB/T 20737 and below shall
apply to this document.
3.1 Linear indication
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.