GB/T 25949-2010 PDF English
US$365.00 · In stock · Download in 9 secondsGB/T 25949-2010: Aluminium ores -- Preparation of samples Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
GB/T 25949-2010 | English | 365 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Aluminium ores -- Preparation of samples
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 25949-2010
GB/T 25949-2010: Aluminium ores -- Preparation of samples---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT25949-2010
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 73.060.40
H 30
GB/T 25949-2010 / ISO 6140.1991
Aluminum Ores – Preparation of Samples
(ISO 6140.1991, IDT)
Issued on: DECEMBER 23, 2010
Implemented on: SEPTEMBER 1, 2011
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative References... 4
3 Terms and Definitions... 4
4 Fundamentals of Sample Preparation... 5
5 Precision of Sample Preparation... 15
6 Bias in Sample Preparation... 15
7 Preparation of Samples for the Determination of Total Moisture... 15
8 Preparation of Samples for Chemical Analysis... 16
9 Preparation of Samples for Physical Testing... 17
10 Packing and Labelling of Samples... 18
Annex A (Normative) Sample Preparation Diagrams... 20
Annex B (Informative) Examples of Mechanical Mixers... 22
Annex C (Informative) Mechanical Sample Dividers... 24
Annex D (Informative) Manual Sampling Implements... 28
Annex E (Informative) Examples of Riffles... 30
Annex F (Informative) Particle Size Reduction Equipment... 31
Foreword
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard used translation method to equivalently adopt ISO 6140.1991 Aluminum Ores –
Preparation of Samples.
This Standard’s Annex A is normative; while Annexes B, C, D, E, and F are informative.
This Standard shall be under the jurisdiction of National Technical Committee on Nonferrous
Metals of Standardization Administration of China (SAC/TC 243).
Drafting organizations of this Standard. Aluminum Corporation of China Limited, Shandong
Branch; and China Nonferrous Metals Industry Standards, Metrology and Quality Research
Institute.
Chief drafting staffs of this Standard. Shao Jing, Jiang Tao, Wang Zhaowen, Teng Xiaofeng,
Sun Hongxi, Zhong Yimei, and Liu Qian.
Aluminum Ores – Preparation of Samples
1 Scope
This Standard specifies methods of treatment of gross samples and subsamples of aluminum
ores with a view to the preparation of samples for the determination of moisture, chemical
analysis and physical testing.
This Standard is applicable to all aluminum ores.
2 Normative References
The following documents are essential to the application of this Document. For the dated
documents, only the versions with the dates indicated are applicable to this Document; for the
undated documents, only the latest version (including all the amendments) is applicable to this
Document.
GB/T 25945-2010 Aluminum ores - Sampling procedures (ISO 8685.1992, IDT)
GB/T 25947-2010 Aluminum ores - Determination of the moisture content of bulk material
(ISO 9033.1989, IDT)
GB/T 25950-2010 Aluminum ores - Experimental determination of the heterogeneity of
constitution (ISO 6138.1991, IDT)
ISO 565.1990 Test sieves - Metal wire cloth, perforated metal plate and electroformed
sheet - Nominal sizes of openings
3 Terms and Definitions
For the purposes of this Standard, the following terms and definitions apply.
3.1 Chemical analysis sample
The sample crushed to pass a sieve aperture of 150 μm used for the determination of chemical
characteristics of the aluminum ore.
3.2 Division
The process of decreasing the sample mass (without modification of the particle size of the
constituent parts) where a representative part of the sample is retained while rejecting the
...... Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 25949-2010 be delivered?Answer: The full copy PDF of English version of GB/T 25949-2010 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 25949-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 25949-2010_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 25949-2010 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.
How to buy and download a true PDF of English version of GB/T 25949-2010?A step-by-step guide to download PDF of GB/T 25949-2010_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD). Step 2: Search keyword "GB/T 25949-2010". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|