Powered by Google www.ChineseStandard.net Database: 189760 (18 May 2024)

GB/T 25786-2010 PDF in English


GB/T 25786-2010 (GB/T25786-2010, GBT 25786-2010, GBT25786-2010)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 25786-2010English150 Add to Cart 0-9 seconds. Auto-delivery. 2-Amino-4-acetamino anisole Obsolete


Standards related to: GB/T 25786-2010

GB/T 25786-2010: PDF in English (GBT 25786-2010)

GB/T 25786-2010
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 71.100.01; 87.060.10
G 56
2-Amino-4-acetamino anisole
2-氨基-4-乙酰氨基苯甲醚
ISSUED ON. DECEMBER 23, 2010
IMPLEMENTED ON. OCTOBER 01, 2011
Issued by.
General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of China.
Table of Contents
Foreword ... 3 
1  Scope ... 4 
2  Normative references ... 4 
3  Requirements ... 5 
4  Sampling ... 5 
5  Test method ... 5 
6  Inspection rules ... 9 
7  Marks, labels, packaging, transportation and storage ... 10 
Foreword
This Standard was proposed by China Petroleum and Chemical Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee 134 on
dyestuff of Standardization Administration of China.
Drafting organizations of this Standard. Zhejiang Jihua Group Co., Ltd., and Shenyang
Research Institute of Chemical Industry.
Main drafters of this Standard. Chen Meifen, and Ji Hao.
2-Amino-4-acetamido anisole
1 Scope
This Standard specifies 2-Amino-4-acetamido anisole’s product requirements, sampling,
test methods, inspection rules, marks, labels, packaging, transport and storage.
This Standard applies to product quality control of 2-Amino-4-acetamido anisole.
Structural formula.
Molecular formula. C9H12N2O2
Relative molecular mass. 180.20 (According to 2007 international relative atomic mass)
CAS RN.. 6375-47-9
2 Normative references
The articles contained in the following documents have become part of this Standard when
they are quoted herein. For the dated documents so quoted, all the modifications
(excluding corrections) or revisions made thereafter shall not be applicable to this Standard.
For the undated documents so quoted, the latest editions shall be applicable to this
Standard.
GB/T 601 Chemical reagent - Preparation of standard volumetric solutions
GB/T 603 Chemical reagent - Preparation of preparations and products used in the
test method (GB/T603-2002, neq ISO 6353-1.1982)
GB/T 2386-2006 Dye and dye intermediate - Determination of the moisture
GB/T 6678-2003 General rules for sampling chemical products
GB/T 6682 Analyze the specification for water using and test methods of the
laboratory (GB/T 6682-2008, ISO 3696.1987, MOD)
GB/T 8170-2008 Representation and determination of rounding and limit values
5.3 Determination of content of 2-Amino-4-acetamido anisole (amino value,
calculated in dry product)
5.3.1 Reagent and solvent
a) Hydrochloric acid solution. Volume ratio of hydrochloric acid to water is 1.1;
b) Sodium nitrite standard titration solution. c(NaNO2)=0.1mol/L, during calibration,
use starch-potassium iodide test paper to determine the end point;
c) Potassium bromide solution. 100g/L;
d) Starch - potassium iodide test paper.
5.3.2 Analytical steps
Weigh about 0.5g (accurate to 0.1mg) of sample; place in a 400mL beaker; add 200mL of
hot water to dissolve it; add 30mL of 1+1 hydrochloric acid solution and 20mL of potassium
bromide solution; cool to 5°C ~ 10°C; use sodium nitrite standard solution to perform
titration till the potassium iodide starch test paper appears in light blue, and lasts for 5min
without disappearing, that is the end point; perform blank test at the same time.
5.3.3 Result calculation
Content of 2-Amino-4-acetamido anisole (amino value, calculated in dry product), counted
in mass fraction w1, its value is expressed in %, is calculated according to Formula (1).
Where.
V — The consumption value of standard sodium nitrite volumetric solution volume for
specimen, in unit of milliliter (mL);
V0 — The consumption value of standard sodium nitrite titration solution for blank test,
in unit of milliliter (mL);
c — The actual value of the standard sodium nitrite titration solution concentration, in
unit of mole per liter (mol/L);
M — Molar mass of 2-Amino-4-acetamido anisole, in unit of gram per mole (g/mol
[M(C9H12N2O2)=180.20];
m — The value of test sample’s mass (calculated in dry product), in unit of gram (g).
Calculation result is rounded to two decimal places.
5.3.4 Permissible error
e) Sample injection. 5µL.
Choose the appropriate operation conditions of chromatogram according to different
instruments.
5.4.5 Analytical steps
Weigh about 25mg of sample (accurate to 1mg); place it in a 25mL volumetric flask; add
methanol to dissolve and fix the volume; place in an ultrasonic generator to dissolve fully;
take it out; shake well for standby application.
After the instrument operates stably, use a micro syringe to absorb the sample solution to
inject into an injection valve; perform the result processing after the last component flows
out (see Figure 1).
5.4.6 Result calculation
The purity of 2-Amino-4-acetamido anisole, counted in w2, its value is expressed in %, is
calculated according to Formula (2).
Where,
A — The peak area value of 2-Amino-4-acetamido anisole;
∑Ai — A sum of peak area values of various components in the sample.
Calculation result is rounded to two decimal places.
5.4.7 Permissible error
The difference between two parallel determination results shall not be greater than 0.2%;
take the arithmetic mean of them as the determination result.
5.4.8 Chromatogram
Chromatogram is shown in Figure 1.
7 Marks, labels, packaging, transportation and storage
7.1 Marks and labels
Each package of 2-Amino-4-acetamido anisole shall be coated with a firm and clearly
marked, and be noted with product name, specification, registered trademark, product
license number, logo (if applicable), net content, manufacturer name and address,
standard number, batch number, and production date. Batch number and production date
can also be printed on the label. The label and product qualification certificate shall be
placed outside the plastic bag in the packing barrel.
7.2 Packaging
2-Amino-4-acetamido anisole is packaged with a woven bag that is lined with a plastic bag;
net weight of each pad is 50kg. Other packaging can be determined through negotiation
with the user.
7.3 Transport
During transport, it shall prevent solarization, dampness and rain, and avoid strong
squeezing and collision.
7.4 Storage
2-Amino-4-acetamido anisole shall be stored in a cool, dry and ventilated storeroom,
prevented from dampness and heating, kept away from the fire, and stored and transported
according to provisions of chemicals.
......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.