GB/T 2432-1981 PDF English
US$105.00 · In stock · Download in 9 secondsGB/T 2432-1981: Gasoline--Determination of tetraethyl lead content. Complexometric titration method Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 2432-1981 | English | 105 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Gasoline--Determination of tetraethyl lead content. Complexometric titration method
| |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 2432-1981
GB/T 2432-1981: Gasoline--Determination of tetraethyl lead content. Complexometric titration method
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2432-1981
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
(Reconfirmed in 1988)
Gasoline - Determination of Tetraethyl
Lead Content - Complexometric Titration
Issued on: FEBRUARY 13, 1981
Implemented on: JULY 01, 1981
Issued by. General Administration of Standard
Table of Contents
1 Method Summary... 3
2 Instruments... 3
3 Reagents... 3
4 Preparation... 4
5 Test Procedures... 5
6 Calculation... 6
7 Precision... 7
8 Report... 7
Additional Information... 7
Gasoline - Determination of Tetraethyl
Lead Content - Complexometric Titration
This Method is applicable to the determination of tetraethyl lead content in gasoline.
1 Method Summary
This method uses boiling hydrochloric acid to decompose tetraethyl lead in gasoline to
produce lead chloride. Then add excessive ethylenediaminetetraacetic acid disodium
standard solution, which reacts with lead ions to form a complex. The excessive
ethylenediaminetetraacetic acid disodium standard solution was titrated by zinc
chloride standard solution. It is expressed by grams of tetraethyl lead in 1kg of gasoline.
2 Instruments
2.1 Burette. 25mL.
2.2 Pipette. 25 and 50mL.
2.3 Conical flask with stopper grinding mouth. 500mL.
2.4 Measuring cylinder. 50 and 100mL.
2.5 Thermometer. 0~100°C, with division of 1°C.
2.6 Petroleum density meter. 0.710~0.770 g/mL.
2.7 Volumetric flask. 1000mL.
2.8 Electric hot plate or sealed electric furnace. 300watts.
2.9 Condenser tube. Five-ball with grinding mouth is matched with conical flask.
3 Reagents
3.1 Hydrochloric acid. analytically pure, formulated into 6N hydrochloric acid aqueous
solution.
3.2 Ammonia. analytically pure.
G – weight of zinc particles, in g;
65.38 - grams of zinc per gram of molecule.
4.2 Preparation and calibration of 0.02M ethylenediaminetetraacetic acid disodium
standard solution.
4.2.1 Preparation. take 8g of ethylenediaminetetraacetic acid disodium; dissolve it in
1000mL of distilled water; and mix well.
4.2.2 Calibration. accurately take 25mL of ethylenediaminetetraacetic acid disodium
standard solution in a conical flask; add 5~6 drops of 0.5% xylenol orange aqueous
solution; adjust the solution to a pink color by ammonia water. Then use the 6N
hydrochloric acid aqueous solution to adjust it into bright yellow; and then add 0.5 mL
of 6N hydrochloric acid aqueous solution; add 1.5~2.0g of hexamethylenetetramine;
and immediately titrate by a 0.02M zinc chloride standard solution until the solution
turns from yellow to pink, which shall be regarded as the end point.
The molar concentration, M3, of the ethylenediaminetetraacetic acid disodium standard
solution is calculated according to Formula (3).
Where.
M2 – molar concentration of zinc chloride standard solution;
V1 – volume of zinc chloride standard solution consumed by titration, in mL;
25 – volume of the measured ethylenediaminetetraacetic acid disodium standard
solution, in mL.
Perform each calibration at least for three times; and the difference among the results
of each measurement shall not exceed 0.2% of the arithmetic mean; otherwise it must
be discarded.
(i.e.. ௫௨ ௩௨ି௨ ௩௨௩ ௩௨ ൈ 100 ൏ 0.2%)
Take the arithmetic mean value of no less than three titration results as the molar
concentration of ethylenediaminetetraacetic acid disodium standard solution.
5 Test Procedures
5.1 In a clean conical flask with a stopper, inject 50mL of specimen by a pipette; add
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 2432-1981 be delivered?Answer: The full copy PDF of English version of GB/T 2432-1981 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 2432-1981_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2432-1981_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 2432-1981 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 2432-1981?A step-by-step guide to download PDF of GB/T 2432-1981_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 2432-1981".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|