HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 2423.43-2008 PDF English

US$205.00 · In stock · Download in 9 seconds
GB/T 2423.43-2008: Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 2423.43: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB/T 2423.43-2008English205 Add to Cart 0-9 seconds. Auto-delivery Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests Valid
GB/T 2423.43-1995English599 Add to Cart 3 days Environmental testing for electric and electronic products - Part 2: test methods - Mounting of components, equipment and other articles for dynamic tests including shock (Ea), bump (Eb), vibration (Fc and Fd) and steady-state acceleration (Ga) Obsolete

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB/T 2423.43-2008
      

Similar standards

GB/T 2423.47   GB/T 2423.41   GB/T 2423.4   GB/T 2423.50   

GB/T 2423.43-2008: Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2423.43-2008
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 19.040 K 04 GB/T 2423.43-2008 / IEC 60068-2-47.2005 Replacing GB/T 2423.43-1995 Environmental testing for electric and electronic products - Part 2. Test methods - Mounting of specimens for vibration, impact and similar dynamic tests (IEC 60068-2-47.2005. Environmental testing - Part 2-47. Test methods - Mounting of specimens for vibration, impact and similar dynamic tests, IDT) Issued on: MAY 19, 2008 Implemented on: JANUARY 1, 2009 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration Committee.

Table of Contents

Foreword ... 3 Introduction ... 5 1 Scope ... 6 2 Normative references ... 6 3 Terms and definitions ... 6 4 General ... 7 5 Mounting, where the specimen is a component ... 7 6 Mounting, where the specimen is equipment and other articles ... 8 7 Mounting, where the specimen is a packaged product ... 8 8 Information to be given in the relevant specification ... 10 Annex A (Informative) General guidance ... 16 Annex B (Informative) Guidance on packaged products ... 25 Annex C (Informative) Response of a single degree of freedom (SDOF) system ... 35

Foreword

GB/T 2423 Environmental testing for electric and electronic products - Part 2. Test methods is divided into several parts according to test methods. This Part is the 43rd Part of GB/T 2423. This Part identically adopts IEC 60068-2-47.2005 (Ed 3.0) Environmental testing - Part 2-47. Tests - Mounting of specimens for vibration, impact and similar dynamic tests. For easy use, this Part makes the following editorial modifications. a) “This Part of IEC 60068-2” was modified to “This Part of GB/T 2423” or “This Part”; b) used decimal point “.” to replace “,” which was used as decimal point; c) deleted the foreword of IEC 60068-2; d) modified this Part as the present name so as to be consistent with names of other parts of GB/T 2423. This Part replaces GB/T 2423.43-1995 Environmental testing for electric and electronic products Part 2. test methods Mounting of components, equipment and other articles for dynamic tests including shock(Ea), bump(Eb), vibration(Fc and Fd) and steady-state acceleration(Ga) and guidance. This differences between this Part and versions of standard substituted by this Part are as follows. a) this Part added the installation of packaging products and the technical content that single-degree-of-freedom system is responded by the half- sine pulse; added and supplemented the content of the previous editions; b) added Clause 7 Mounting, where the specimen is a packaged product; c) added Annex B Guidance on packaged products; d) added Annex C Response of a single degree of freedom (SDOF) system to a half-sine shock pulse; e) made great modification to Annex A. Annex A, Annex B, Annex C of this Part are informative. This Part was proposed by China Electrical Equipment Industry Association. This Part shall be under the jurisdiction of National Technical Committee on Environmental Conditions and Environmental Testing of Electric and Electronic Products of Standardization Administration of China (SAC/TC 8). The drafting organizations of this Part. Guangzhou University, Ministry of Information Industry, the Fifth Institute of Electronics, Shanghai Institute of Quality Supervision, Inspection and Technology, Beijing University of Aeronautics and Astronautics, Suzhou Test Instrument Factory, Beijing Zhongyuan Micro Instrument Company. Main drafters of this Part. Xu Zhonggen, Ji Chunyang, Lu Zhaoming, Li Chuanri, Xu Liyi, Zhang Yue, Qiu Ni, He Wentao. Version of standard substituted by this Part is. - GB/T 2423.43-1995. Environmental testing for electric and electronic products - Part 2. Test methods - Mounting of specimens for vibration, impact and similar dynamic tests

1 Scope

This Part of GB/T 2423 provides methods for mounting products, whether packaged or unpackaged, as well as mounting requirements for equipment and other articles, for the series of dynamic tests in GB/T 2423, that is impact (Test E), vibration (Test F) and acceleration, steady-state (Test G). When they are fastened to the test apparatus and subjected to these tests, whether packaged or unpackaged, they are referred to as specimens.

2 Normative references

The following standards contain the provisions which, through reference in this Part of GB/T 2423, constitute the provisions of this Part. For dated references, subsequent amendments (excluding corrections) or revisions do not apply to this Part. However, the parties who enter into agreement based on this Part are encouraged to investigate whether the latest versions of these documents are applicable. For undated reference documents, the latest versions apply to this Part. GB/T 2421-1999 Environmental testing for electric and electronic products - Part 1. General and guidance (idt IEC 60068-1.1988); GB/T 2423.39-1990 Basic environmental testing procedures for electric and electronic products - Test Ee. Bounce GB/T 2298-1991 Mechanical vibration and shock - Terminology (neq ISO 2041.1990)

3 Terms and definitions

For the purposes of this document, the terms and definitions used in GB/T 2298-1991 and GB/T 2423 apply. 3.1 package ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB/T 2423.43-2008 be delivered?

Answer: The full copy PDF of English version of GB/T 2423.43-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 2423.43-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 2423.43-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB/T 2423.43-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 2423.43-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2423.43-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 2423.43-2008?

A step-by-step guide to download PDF of GB/T 2423.43-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 2423.43-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9