Buy with 99+ currencies (Euro, RMB, JPY, KRW...): GB/T 22030-2015 Chinese:
GB/T 22030-2015 GB/T 22030-2015: PDF in English (GBT 22030-2015)
GB/T 22030-2015
GB
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 75.160.20
E 31
Replacing GB/T 22030-2013
Blendstocks of ethanol gasoline for motor vehicles
ISSUED ON. MAY 8, 2015
IMPLEMENTED ON. MAY 8, 2015
Issued by. General Administration of Quality Supervision, Inspection
and Quarantine;
Standardization Administration Committee.
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 7
4 Product classification and naming ... 8
5 Requirements and test methods ... 8
6 Sampling ... 12
7 Marks, packaging, transport and storage ... 12
8 Safety ... 12
9 Implementation of standard ... 12
Annex A (Normative) Technical requirements and test methods for No. 98
blendstocks of ethanol gasoline for motor vehicles (V) ... 13
Foreword
This Standard was drafted in accordance with the rules given in GB/T
1.1-2009.
This Standard replaces GB/T 22030-2013 Blendstocks of ethanol gasoline for
motor vehicles.
Compared with GB/T 22030-2013, the main technical differences in this
Standard are as follows.
- modified sub-clause 5.1 to. the additives used in blendstocks of ethanol
gasoline for motor vehicles shall be used without any known adverse
effects and shall be used in the recommended amount. The blendstocks
of ethanol gasoline for motor vehicles shall not contain any additives and
contaminants that can cause the vehicle to function improperly. The
blendstocks of ethanol gasoline for motor vehicles must not be manually
added with methylal, aniline, halogen and phosphorus, silicon or other
compounds (see 5.1);
- added sub-clause 5.3. see Table 2 for technical requirements and test
methods for No. 89, No. 92 and No. 95 blendstocks of ethanol gasoline
for motor vehicles (V). When an enterprise is able to produce and sell No.
98 blendstocks of ethanol gasoline for motor vehicles (V), its technical
requirements and test method shall comply with Annex A (see 5.3);
- added Table 2 “Technical requirements and test methods for blendstocks
of ethanol gasoline for motor vehicles (V)” (see Table 2);
- added Clause 9 The implementation of standard (see Clause 9);
- added normative Annex A “Technical requirements and test methods for
No. 98 blendstocks of ethanol gasoline for motor vehicles” (see Annex A).
This Standard shall be under the jurisdiction of National Technical Committee
on Petroleum Products and Lubricants of Standardization Administration of
China (SAC/TC 280).
Main drafting organizations of this Standard. China Petroleum & Chemical
Corporation Petrochemical Research Institute, China Petroleum & Chemical
Corporation, China National Petroleum Corporation.
Main drafters of this Standard. Ni Bei, Zhang Baosheng, Zhang Yan.
Versions of standard substituted by this Standard are.
Blendstocks of ethanol gasoline for motor vehicles
WARNING. In the event of failure to comply with appropriate
precautions, there may be a danger in the course of production,
transportation, handling, storage and use of the product of this
Standard. This Standard is not intended to advise on all safety issues
related to this product. It is the responsibility of the user to establish
appropriate safety and precautions before using this Standard and to
determine the suitability of the relevant regulatory limits.
1 Scope
This Standard specifies the terms and definitions, product classification and
naming, requirements and test methods, sampling, marks, packaging,
transport and storage, safety as well as the implementation of standard for
blendstocks of ethanol gasoline for motor vehicles.
This Standard is applicable to blendstocks of ethanol gasoline (E10) for motor
vehicles that consist of liquid hydrocarbons or liquid hydrocarbons and
additives of improved performance so as to comply with GB 18351
requirements as reconciliation.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including
any amendments) applies.
GB/T 259, Petroleum products - Determination of water soluble acids and
alkalis
GB/T 260, Determination of water content in petroleum products
GB/T 503, Test method for knock characteristics of motor and aviation
fuels by the motor method
GB/T 511, Petroleum products and additives - Determination of mechanical
impurities - Gravimetric method
GB/T 1792, Distillate fuels - Determination of mercaptan Sulphur -
Potentiometric titration method
GB/T 1884, Crude petroleum and liquid petroleum products - Laboratory
determination of density - Hydrometer method
GB/T 1885, Petroleum measurement tables
GB/T 4756, Method for manual sampling of petroleum liquids
GB/T 5096, Petroleum products - Corrosiveness to copper - Copper strip
test
GB/T 5487, method for knock characteristics of motor fuels by the
Research method
GB/T 6536, Standard test method for distillation of petroleum products at
atmospheric pressure
GB/T 8017, Standard test method for vapor pressure of petroleum
products (Reid Method)
GB/T 8018, Determination of oxidation stability of gasoline - Induction
period method
GB/T 8019, Standard test method for gum content in fuels - By jet
evaporation
GB/T 8020, Determination of lead in gasoline - Atomic absorption
spectrometry
GB/T 11132, Standard test method for hydrocarbon types in liquid
petroleum products by fluorescent indicator adsorption
GB/T 11140, Standard test method for sulfur in petroleum products by
wavelength dispersive X-ray fluorescence spectrometry
GB 13690, General rule for classification and hazard communication of
chemicals
GB 18351, Ethanol gasoline for motor vehicles (E10)
GB 30000.7-2013, Rules for classification and labelling of chemicals - Part
7. Flammable liquids
SH 0164, Rules for the Packing, Storage, Transportation and Inspection
upon Delivery of Petroleum products
SH/T 0174, Halogen qualitative test of aromatic hydrocarbons and light
petroleum products thiols (Doctor test)
SH/T 0253, Determination method for total sulfur content in light petroleum
products (coulometric method)
SH/T 0604, Crude petroleum and petroleum products - Determination of
density-Oscillating U-tube method
SH/T 0663, Standard test method for determination of certain alcohols and
ethers in gasoline by gas chromatography
SH/T 0689, Standard test method for determination of total sulfur in light
hydrocarbons motor fuels and oils by ultraviolet fluorescence
SH/T 0693, Standard test method for determination of benzene, toluene,
ethylbenzene, p/m-xylene, o-xylene, C9 and heavier aromatics, and total
aromatics in finished gasoline by gas chromatography
SH/T 0711, Standard test method for manganese in gasoline by atomic
absorption spectroscopy
SH/T 0712, Standard test method for iron in gasoline by atomic absorption
spectroscopy
SH/T 0713, Standard test method for determination of benzene and
toluene in finished motor and aviation gasoline by gas chromatography
SH/T 0720, Standard test method for determination of oxygenates in
gasoline by gas chromatography and oxygen selective flame ionization
detection
NB/SH/T 0741, Standard Test Method for Determination of Hydrocarbon
Types Composition in Gasoline by Multidimensional Gas Chromatography
SH/T 0794, Standard test method for vapor pressure of petroleum products
(mini method)
ASTM D7039, Standard test method for sulfur in gasoline and diesel fuel
by monochromatic wavelength dispersive X-ray fluorescence
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 antiknock index
half of the sum of the research octane number (RON) and the motor octane
number (MON)
GB/T 1884, GB/T 1885 shall prevail.
6 Sampling
The sampling shall be carried out according to GB/T 4756. Take 4 L for
exit-factory inspection and sample reservation. If the blendstock of ethanol
gasoline for motor vehicles contains manganese, sampling shall be carried
out in a dark place.
7 Marks, packaging, transport and storage
7.1 The marks, packaging, transport, storage as well as delivery,
acceptance of the product of this Standard shall be in accordance with SH
0164. f the blendstock of ethanol gasoline for motor vehicles contains
manganese, it shall be protected from light during transport and storage.
7.2 During storage and transport of the blendstock of ethanol gasoline for
motor vehicles that complies with this Standard, the entire system shall be
required clean and free of water. Pay enough attention to the monitoring on
water content.
8 Safety
According to GB 136...
......
(Above excerpt was released on 2017-08-02, modified on 2021-06-07, translated/reviewed by: Wayne Zheng et al.)
Source: https://www.chinesestandard.net/PDF.aspx/GBT22030-2015