GB/T 19976-2005 PDF English
US$70.00 · In stock · Download in 9 secondsGB/T 19976-2005: Textiles -- Determination of bursting strength -- Steel ball method Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
GB/T 19976-2005 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Textiles -- Determination of bursting strength -- Steel ball method
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 19976-2005
GB/T 19976-2005: Textiles -- Determination of bursting strength -- Steel ball method---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT19976-2005
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 59.080.30
W 04
Textiles - Determination of Bursting Strength -
Steel Ball Method
Issued on. NOVEMBER 04, 2005
Implemented on. MAY 01, 2006
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China (GAQSIQ);
Standardization Administration of China (SAC).
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative References... 4
3 Terms and Definitions... 4
4 Principle... 5
5 Apparatuses... 5
6 Samples... 5
7 Conditioning... 5
8 Test Procedures... 6
9 Calculation and Expression of Results... 6
Appendix A (Informative) Bursting Attachment Sketch Map... 8
Appendix B (Informative) Selection of Test Zone... 9
Foreword
The main technical contents of this standard is formulated by reference to ISO
3303.1990 "Rubber-or Plastics-coated Fabrics-Determination of Bursting Strength"
and EN 12332-1.1998 "Rubber-or Plastics-coated Fabrics-Determination of Bursting
Strength - Part 1.Steel Ball Method".
Appendix A and Appendix B of this standard are informative.
This standard was proposed by China National Textile and Apparel Council.
This standard shall be under the jurisdiction of the Sub-committee for foundation of
Technical Committee on Textiles of Standardization Administration of China.
Drafting organizations of this standard. Standardization Institute of Textile Industry
and China National Textiles Quality Supervision Testing Center.
Chief drafting staffs of this standard. Zheng Yuying, Wang Ying and Hong Yan.
Textiles - Determination of Bursting Strength –
Steel Ball Method
1 Scope
This standard specifies the methods for the determination of the bursting strength of
textile by polished steel balls, including the test piece bursting strength tests in two
states of conditioning in standard atmosphere for test and soaked in the water.
This standard is applicable to various textiles.
2 Normative References
The following normative documents contain the provisions which, through reference in
this standard, constitute the provisions of this standard. For dated reference, the
subsequent amendments or revisions of these publications do not apply. However, all
parties who reach an agreement according to this standard are encouraged to study
whether the latest editions of these documents are applicable. For undated
references, the latest edition of the normative document referred to applies.
GB 6529 Standard Atmospheres for Textiles Conditioning and Testing
3 Terms and Definitions
The following terms and definitions are applicable to this standard.
3.1
Bursting strength (strength at burst)
It refers to the measured maximum force in the process when the polished steel balls
is pressed against the test piece in the direction vertical to test piece plane until the
test piece is damaged.
4 Principle
A test piece is securely clamped between coaxial apertures of the fixed base. A
polished steel ball, traversing at a fixed speed, is pressed against the test piece until
failure occurs.
5 Apparatuses
5.1 Constant rate of extension (CRE) testing machine with force measurement
accuracy not more than ±1% of the indicating value, including one test piece clamp
and a polished steel ball component.
5.2 Bursting attachment, such that the test piece is held securely by a ring
mechanism and a steel polished steel ball. The ring mechanism has an internal
diameter of 45mm±0.5mm, with a concentric trench on the surface in case of sliding of
the test piece.
5.3 The instruments, Grade 3 water and nonionic wetting agent required by the
humidity test.
6 Samples
The test pieces shall be representative without folding and wrinkle at the test zone
and selvages. Appendix B provides a reference method for selection of the test zone
as an example.
7 Conditioning
The atmospheres for preconditioning, conditioning and testing shall be in accordance
with GB 6529.The preconditioning and conditioning are not required for the humidity
test.
8 Test Procedures
8.1 Installation of bursting attachment
Select polished steel balls of diameter 25mm or 38mm. Install the polished steel ball
and clamp on the testing machine to ensure the center of ring clamp on the axial line
of ball.
8.2 Set the machine
Select measuring range of force to make its output value at 10%~90% of the full range.
Set the speed of the testing machine as 300mm/min± 10mm/min.
8.3 Clamp test piece
Clamp the test piece on the clamp with reverse side facing ball; the test piece shall be
ensured to be flat and smooth without pull and wrinkles.
8.5 Humidity test
Conduct a test immediately after taking the test piece out of liquid and on the
absorbent paper to absorb superfluous water.
9 Calculation and Expression of Results
9.1 Calculate average value of bursting strength, in N, to the nearest 1N.
9.2 Calculate coefficient of variation CV of bursting strength, if required, to the
nearest 0.1%.
10 Test Report
The test report shall cover the following contents.
Appendix A
(Informative)
Bursting Attachment Sketch Map
Appendix B
(Informative)
Selection of Test Zone
The example method provided by Figure B.1 may be adopted under no requirements
of textile sampling.
...... Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 19976-2005 be delivered?Answer: The full copy PDF of English version of GB/T 19976-2005 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 19976-2005_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19976-2005_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 19976-2005 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.
How to buy and download a true PDF of English version of GB/T 19976-2005?A step-by-step guide to download PDF of GB/T 19976-2005_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD). Step 2: Search keyword "GB/T 19976-2005". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|