HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 17854-2018 PDF English

US$140.00 · In stock · Download in 9 seconds
GB/T 17854-2018: Solid wire electrodes/flux combinations for submerged arc welding of stainless steels
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 17854: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
GB/T 17854-2018English140 Add to Cart 0-9 seconds. Auto-delivery Solid wire electrodes/flux combinations for submerged arc welding of stainless steels Valid
GB/T 17854-1999English559 Add to Cart 3 days Stainless steel electrodes and fluxs for submerged arc welding Obsolete

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: GB/T 17854-2018
      

Similar standards

GB/T 19804   GB/T 19419   GB/T 19418   GB/T 10859.1   

GB/T 17854-2018: Solid wire electrodes/flux combinations for submerged arc welding of stainless steels


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT17854-2018
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 25.160.20 J 33 Replacing GB/T 17854-1999 Solid wire electrodes/flux combinations for submerged arc welding of stainless steels Issued on: MARCH 15, 2018 Implemented on: OCTOBER 1, 2018 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the PRC; Standardization Administration of the PRC.

Table of Contents

Foreword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Classification ... 6 4 Technical requirements ... 6 5 Test methods ... 9 6 Re-inspection ... 11 7 Technical delivery conditions ... 11 Appendix A (Informative) Flux type ... 12

Foreword

This Standard is drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB/T 17854-1999 “Stainless steel electrodes and fluxes for submerged arc welding”. As compared with GB/T 17854-1999, the main changes are as follows. - CHANGE the standard’s name to “Solid wire electrodes/flux combinations for submerged arc welding of stainless steels”; - According to JIS Z 3324.2010, ADJUST the method of classification for stainless steel wire electrodes-flux combinations; - DELETE the technical requirements for wire electrodes, executed in accordance with GB/T 29713 “Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels”; - DELETE the technical requirements for flux, and the relevant content is adjusted to GB/T 36037 “Fluxes for submerged arc welding and electroslag welding”; - According to JIS Z 3324.2010, ADD five classifications for deposited metal of F309L, F312, F16-8-2, F317L, and F347L, and CHANGE “F316CuL” to “F316LCu”; - According to the actual application needs of China, ADD four classifications for deposited metal of F309LMo, F385, F2209, and F2594; - According to JIS Z 3324.2010, ADJUST the Ni content of the deposited metal classification F308L from “9.0%~11.0%” to “9.0%~12.0%”, and ADJUST the Ni content of F316L and F316LCu from “11.0%~14.0%” to “11.0%~16.0%”; - According to JIS Z 3324.2010, ADJUST the percentage elongation after fracture of the deposited metal classification F308L from “25%” to “30%”, and ADJUST the percentage elongation after fracture of F410 from “20%” to “15%”, ADJUST the percentage elongation after fracture of F430 from “17%” to “15%”; - According to JIS Z 3324.2010, ADJUST the heat treatment specifications of deposited metal classifications F410 and F430; - According to GB/T 25777 “Preparation methods of deposited metal specimens for chemical analysis”, ADJUST the preparation of deposited Solid wire electrodes/flux combinations for submerged arc welding of stainless steels

1 Scope

This Standard specifies the classification, technical requirements, test methods, re-inspection, technical delivery conditions, and other contents of solid wire electrodes-flux combinations for submerged arc welding of stainless steels. This Standard is applicable to the classification requirements for solid wire electrodes-flux combinations for submerged arc welding of stainless steels. Among the deposited metals, chromium content shall not be less than 11%; nickel content shall not be more than 38%.

2 Normative references

The following documents are indispensable for the application of this document. For the dated references, only the versions with the dates indicated are applicable to this document. For the undated references, the latest version (including all the amendments) are applicable to this document. GB/T 1954 Methods of measurement for ferrite content in austenitic Cr-Ni stainless steel weld metals (GB/T 1954-2008, ISO 8249.2000, MOD) GB/T 2652 Tensile test methods on weld and deposited metal (GB/T 2652- 2008, ISO 5178.2001, IDT) GB/T 4334 Corrosion of metals and alloys - Test methods for intergranular corrosion of stainless steels (GB/T 4334-2008, ISO 3651-1.1998 & ISO 3651-2.1998, MOD) GB/T 18591 Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (GB/T 18591-2001, idt ISO 13916.1996) GB/T 25774.1 Test methods for welding consumables - Part 1. Preparation and testing of deposited metal specimens for mechanical properties in steel nickel and nickel alloys (GB/T 25774.1-2010, ISO 15792-1.2000, MOD) GB/T 25775 Technical delivery conditions for welding consumables - Type of product dimensions tolerances and markings (GB/T 25775-2010, ISO 4.4 Ferrite content of weld metal The ferrite content of weld metal shall be determined by negotiation between the supplier and the buyer.

5 Test methods

5.1 Chemical analysis of deposited metal 5.1.1 Specimen preparation Deposited metal specimens for chemical analysis shall be prepared according to the provisions of GB/T 25777, or may be prepared on the specimens for mechanical properties or the pull-rods after breaking. In the arbitration test, it shall be carried out in accordance with the provisions of GB/T 25777. 5.1.2 Analysis method The chemical composition of deposited metal can be analyzed by any suitable analytical method. In the arbitration test, it shall be carried out according to the analytical method confirmed by the supplier and the buyer. 5.2 Mechanical properties of deposited metal 5.2.1 Base metal for test The base material for the tensile test of deposited metal shall be a steel plate equivalent to the chemical composition of the deposited metal. If other base materials are used, it shall use the test welding consumables or other equivalent welding consumables to weld the isolation layer on the groove face and the surface of base plate. The thickness after processing shall not be less than 3 mm. 5.2.2 Flux drying specification The flux before welding shall be dried at 250 °C~400 °C for 1 h~2 h or be dried according to the specification recommended by the manufacturer. 5.2.3 Specimen preparation 5.2.3.1 The specimens for mechanical properties shall be prepared according to GB/T 25774.1. Specimen type 1.6 shall be adopted. 5.2.3.2 Welding using Φ3.2 mm or Φ4.0 mm of wire electrodes shall be carried out according to the specifications specified in Table 3. When using other dimensions of wire electrodes, the welding shall be carried out according to the

Appendix A

(Informative) Flux type For ease of application, this Standard provides the flux type code and main chemical composition according to GB/T 36037, SEE Table A.1. Table A.1 -- Flux type code and main chemical composition Flux type code Main chemical composition (mass fraction) % MS (Silicon-manganese type) MnO+SiO2 ≥50 CaO ≤15 CS (Silicon-calcium type) CaO+MgO+SiO2 ≥55 CaO+MgO ≥15 CG (Magnesium-calcium type) CaO+MgO 5~50 CO2 ≥2 Fe ≤10 CB (Magnesium-calcium-alkali type) CaO+MgO 30~80 CO2 ≥2 Fe ≤10 CG-I (Iron powder magnesium- calcium type) CaO+MgO 5~45 CO2 ≥2 Fe 15~60 CB-I (Iron powder magnesium- calcium-alkali type) CaO+MgO 10~70 CO2 ≥2 Fe 15~60 GS (Silicon-magnesium type) MgO+SiO2 ≥42 Al2O3 ≤20 CaO+CaF2 ≤14 ZS (Silicon-zirconium type) ZrO2+SiO2+MnO ≥45 ZrO2 ≥15 RS (Silicon-titanium type) TiO2+SiO2 ≥50 TiO2 ≥20 AR (Aluminum-titanium type) Al2O3+TiO2 ≥40 ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of GB/T 17854-2018 be delivered?

Answer: The full copy PDF of English version of GB/T 17854-2018 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 17854-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 17854-2018_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- GB/T 17854-2018 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 17854-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17854-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 17854-2018?

A step-by-step guide to download PDF of GB/T 17854-2018_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 17854-2018".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9