HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (2 Feb 2025)

GB/T 17793-2010 PDF English


Search result: GB/T 17793-2010 English: PDF (GB/T17793-2010)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 17793-2010English185 Add to Cart 0-9 seconds. Auto-delivery. Wrought copper and copper alloy plate, sheet and strip for general purposes -- Dimensions and tolerances Valid
GB/T 17793-1999English399 Add to Cart 3 days Wrought copper and copper alloy plate, sheet and strip for general purposes-dimensions and tolerances Obsolete
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 17793-2010     Related standards: GB/T 17793-2010

PDF Preview: GB/T 17793-2010


GB/T 17793-2010: PDF in English (GBT 17793-2010)

GB/T 17793-2010 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 77.150.30 H 62 Replacing GB/T 17793-1999 Wrought copper and copper alloy plate, sheet and strip for general purposes - Dimensions and tolerances ISSUED ON: JANUARY 10, 2011 IMPLEMENTED ON: OCTOBER 01, 2011 Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People's Republic of China. Table of Contents Foreword ... 3  1 Scope ... 5  2 Requirements ... 5  Foreword This Standard replaces GB/T 17793-1999 “Wrought copper and copper alloy plate, sheet and strip for general purposes - Dimensions and tolerances”. Compared with GB/T 17793-1999, the main changes in this Standard are as follows: - modified the available designations and specifications of plate, sheet and strip: added four designations H63, H85, QSn8-0.3 and BZn18-17 for sheet and strip, added four designations H85, HPb60-2, QSn8-0.3 and BZn18-17 for plate; changed the lower limit of sheet and strip from "0.05mm" to "greater than 0.15mm"; - tightened the provisions on thickness tolerance for pure copper, brass cold rolled plates of which the thickness is greater than 5.0mm, the width is not greater than 1250mm; - reclassified the thickness tolerance for pure copper, brass cold rolled sheets and strips; tightened the provisions on thickness tolerance for the part with a width greater than 700mm~1200mm; - reclassified the thickness tolerance for bronze, cupronickel sheets and strips; modified corresponding thickness tolerance; - reclassified the width tolerance for plates; added allowable deviation of roll slitting; tightened the provisions on shear tolerance with a thickness greater than 12mm; - tightened the provisions on plate flatness; - reclassified the side curvature of sheets and strips; added the high- precision level and modified corresponding side curvature. This Standard modified on the basis of adopting the part of size tolerance of Japanese Industrial Standard JIS H3100: 2006 “Copper and copper alloy sheets, plates and strips” and JIS H3110:2006 “Phosphor bronze and nickel silver sheets, plates and strips”. The degree of consistency with JIS H3100:2006 and JIS H3110:2006 is non-equivalent. This Standard shall be under the jurisdiction of National Technical Committee on Non-ferrous Metals of Standardization Administration of China (SAC/TC 243). Main drafting organizations of this Standard: Chinalco Luoyang Copper Industry Co., Ltd., China Nonferrous Metals Industry Standard Metrology and Quality Institute. Wrought copper and copper alloy plate, sheet and strip for general purposes - Dimensions and tolerances 1 Scope This Standard specifies dimensions and tolerances for wrought copper and copper alloy plate, sheet and strip. This Standard is applicable to wrought copper and copper alloy plate, sheet and strip for general purposes. 2 Requirements 2.1 Designations and specifications 2.1.1 The designations and corresponding specifications of plates are shown in Table 1. 2.1.2 The designations and corresponding specifications of sheets and strips are shown in Table 2. ......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.