GB/T 17626.8-2006 PDF in English
GB/T 17626.8-2006 (GB/T17626.8-2006, GBT 17626.8-2006, GBT17626.8-2006)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 17626.8-2006 | English | 145 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Electromagnetic compatibility (EMC) -- Part 4-8: Testing and measurement techniques -- Power frequency magnetic field immunity test
| Valid |
Standards related to: GB/T 17626.8-2006
PDF Preview
GB/T 17626.8-2006: PDF in English (GBT 17626.8-2006) GB/T 17626.8-2006
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 33.100
L 06
GB/T 17626.8-2006 / IEC 61000-4-8:2001
Replacing GB/T 17626.8-1998
Electromagnetic Compatibility – Testing and
Measurement Techniques – Power Frequency
Magnetic Field Immunity Test
(IEC 61000-4-8:2001 Electromagnetic Compatibility (EMC) – Part 4-8:
Testing and Measurement Techniques – Power Frequency Magnetic
Field Immunity Test, IDT)
ISSUED ON: DECEMBER 01, 2006
IMPLEMENTED ON: JULY 01, 2007
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 6
3 General ... 6
4 Terms and Definitions ... 7
5 Test Levels ... 8
6 Test Equipment ... 8
7 Test Set-Up ... 13
8 Test Procedure ... 14
9 Evaluation of Test Results ... 16
10 Test Report ... 17
Annex A (Normative) Induction Coil Calibration Method ... 21
Annex B (Normative) Characteristics of the Induction Coils ... 22
Annex C (Informative) Selection of the Test Levels ... 28
Annex D (Informative) Information on Power Frequency Magnetic Field
Strength ... 31
Foreword
GB/T 17626 Electromagnetic Compatibility – Testing and Measurement Techniques
serial standards currently include the following parts:
GB/T 17626.1-2006 Electromagnetic Compatibility - Testing and Measurement
Techniques - Overview of Immunity Tests
GB/T 17626.2-2006 Electromagnetic Compatibility (EMC) - Testing and
Measurement Techniques - Electrostatic Discharge Immunity Test
GB/T 17626.3-2006 Electromagnetic Compatibility - Testing and Measurement
Techniques - Radiated Radio-Frequency Electromagnetic Field Immunity Test
GB/T 17626.4-1998 Electromagnetic Compatibility - Testing and Measurement
Techniques - Electrical Fast Transient/Burst Immunity Test
GB/T 17626.5-1998 Electromagnetic Compatibility - Testing and Measurement
Techniques - Surge Immunity Test
GB/T 17626.6-1998 Electromagnetic Compatibility - Testing and Measurement
Techniques - Immunity to Conducted Disturbances, Induced by Radio-Frequency
Fields
GB/T 17626.7-1998 Electromagnetic Compatibility - Testing and Measurement
Techniques - General Guide on Harmonics and Inter-Harmonics Measurements
and Instrumentation, for Power Supply Systems and Equipment Connected
Thereto
GB/T 17626.8-2006 Electromagnetic Compatibility (EMC) - Part 8: Testing and
Measurement Techniques - Power Frequency Magnetic Field Immunity Test
GB/T 17626.9-1998 Electromagnetic Compatibility - Testing and Measurement
Techniques - Pulse Magnetic Field Immunity Test
GB/T 17626.10-1998 Electromagnetic Compatibility - Testing and Measurement
Techniques - Damped Oscillatory Magnetic Field Immunity Test
GB/T 17626.11-1999 Electromagnetic Compatibility - Testing and Measurement
Techniques - Voltage Dips, Short Interruptions and Voltage Variations Immunity
Tests
GB/T 17626.12-1998 Electromagnetic Compatibility - Testing and Measurement
Techniques - Oscillatory Waves Immunity Test
GB/T 17626.13-2006 Electromagnetic Compatibility (EMC) - Testing and
Measurement Techniques - Harmonics and Inter-Harmonics Including Mains
Signalling at A.C. Power Port Low Frequency Immunity Test
GB/T 17626.14-2005 Electromagnetic Compatibility - Testing and Measurement
Techniques - Voltage Fluctuation Immunity Test
GB/T 17626.17-2005 Electromagnetic Compatibility - Testing and Measurement
Techniques - Ripple on D.C. Input Power Port Immunity Test
GB/T 17626.27-2006 Electromagnetic Compatibility (EMC) - Testing and
Measurement Techniques - Unbalance Immunity Test
GB/T 17626.28-2006 Electromagnetic Compatibility (EMC) - Testing and
Measurement Techniques - Variation of Power Frequency Immunity Test
GB/T 17626.29-2006 Electromagnetic Compatibility (EMC) - Testing and
Measurement Techniques - Voltage Dips Short Interruptions and Voltage
Variations on D.C. Input Power Port Immunity Tests
This Part is Part 8 of GBJ/T 17626.
This Part equivalently adopts IEC 61000-4-8:2001 Electromagnetic Compatibility –
Part 4: Testing and Measurement Techniques – Part 8: Power Frequency Magnetic
Field Immunity Test. This Part specifies the test levels and methods of the power
frequency magnetic field immunity test of electrical and electronic equipment.
This Part replaced GB/T 17626.8-1998 Electromagnetic Compatibility – Testing and
Measurement Techniques - Power Frequency Magnetic Field Immunity Test since the
date of implementation.
Compared with GB/T 17626.8-1998, the major changes of this Part include that the
Clause 9 Test Results and Test Report are divided into two clauses, namely, Clause 9
Evaluation of Test Results, and Clause 10 Test Report.
This Part has the normative Annexes A and B; and informative Annexes C and D.
This Part was proposed by China Electricity Council.
This Part shall be under the jurisdiction of National Technical Committee for
Standardization of Electromagnetic Compatibility (SAC/TC 246).
Drafting organization of this Part: Wuhan High Voltage Research Institute of SGCC.
Chief drafting staffs of this Part: Wu Xiong, Wan Baoquan, Wang Qin, Jiang Hong, and
Zhang Zeping.
Electromagnetic Compatibility – Testing and
Measurement Techniques – Power Frequency
Magnetic Field Immunity Test
1 Scope
This Part relates to the immunity requirements of equipment, only under operational
conditions, to magnetic disturbances at power frequency related to:
- residential and commercial locations;
- industrial installations and power plants;
- medium voltage and high voltage sub-stations.
The applicability of this standard to equipment installed in different locations is
determined by the presence of the phenomenon, as specified in clause 3.
This Part does not consider disturbances due to capacitive or inductive coupling in
cables or other parts of the field installation.
Other standards dealing with conducted disturbances cover these aspects.
The object of this Part is to establish a common and reproducible basis for evaluating
the performance of electrical and electronic equipment for household, commercial and
industrial applications when subjected to magnetic fields at power frequency
(continuous and short duration field).
The Part defines:
- recommended test levels;
- test equipment;
- test set-up;
- test procedure.
Other kinds of magnetic fields shall be object of standardization:
- fields at other power frequencies (16 2/3 Hz ~ 20 Hz or 30 Hz ~ 400 Hz);
- fields of harmonic currents (100 Hz ~ 2 000 Hz);
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|