GB/T 1603-2001 PDF English
US$70.00 · In stock · Download in 9 secondsGB/T 1603-2001: Determination method of emulsion stability for pesticide Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 1603: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 1603-2001 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Determination method of emulsion stability for pesticide
| Valid |
| GB/T 1603-1979 | English | RFQ |
ASK
|
3 days
|
Determination of the emulsion stability of pesticides
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 1603-2001
GB/T 1603-2001: Determination method of emulsion stability for pesticide---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT1603-2001
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 65.100; 71.040.40
G 23
Replacing GB 1603-1979 (1988)
Determination Method of
Emulsion Stability for Pesticide
ISSUED ON: JULY 13, 2001
IMPLEMENTED ON: FEBRUARY 01, 2002
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Inspection Method ... 5
Foreword
This Standard was formulated by reference of Determination Method of Emulsion
Stability for Pesticide of WHO and CIPAC, and revision basing on GB/T 1603-1979
(1988) Determination Method of Emulsion Stability for Pesticide.
The major technical differences between this Standard and the method of WHO and
CIPAC are as follows:
1 Sampling quantity is different: both WHO and CIPAC specifies to pipet 5mL of
specimen; dilute by 20 times. This Standard takes into account the actual
situation in China. Most products are customarily diluted by 200 times. This
Concentration is closer to the use concentration, so the provision of pre-revision
standard is still retained; the sampling amount is not specified.
2 Judgment criteria is different: WHO specifies that oil slick, floating paste and
sediment shall be observed after standard for 2h; the specific different products
are generally specified to be no more than 2mL. CIPAC specifies that the
amounts of oil slick, floating paste and sediment shall be observed at 0.5h, 2h
and 24h. FAO adopts the CIPAC method, specifying the maximum amounts of
oil slick, floating paste and sediment for specific products. This Standard
specifies that if the emulsion does not have oil slick, floating paste and sediment
after 1h, then the emulsion stability of the product is qualified.
The major technical differences between this Standard and GB/T 1603-1979(1988) are
as follows:
1 Expand the use scope of the method; incorporate the water emulsions and
microemulsions into the use scope of this Standard.
2 Revise the determination temperature from 25°C~30°C to 30°C±2°C.
3 Revise the pipette used for pipetting sample from 5mL to the pipette with a scale
of 0.02mL.
4 For the standard hard water used for test, basing on reserving the preparation
method stipulated in the original standard, add the preparation method of hard
used in the CIPAC method.
This Standard replaced GB/T 1603-1979 (1988) Determination Method of Emulsion
Stability for Pesticide since the date of implementation.
This Standard was proposed by National Petroleum and Chemical Industry Bureau
Policy and Regulation Division.
Determination Method of
Emulsion Stability for Pesticide
1 Scope
This Standard is applicable to the determination of stability for pesticide emulsifiable
concentrate, water emulsion, microemulsion, and the other reagent emulsion.
2 Inspection Method
2.1 Method summary
Use standard hard water to dilute the specimen, observe the stability of emulsion after
1h.
2.2 Reagents and solutions
Anhydrous calcium chloride;
Calcium carbonate: bake at 400°C for 2h before use;
Magnesium chloride six crystal water: bake at 200°C for 2h before use;
Hydrochloric acid;
Standard hard water: hardness is 0.342 g/L in terms of calcium carbonate. The
preparation method is as follows:
Method I: take 0.304g of anhydrous calcium chloride and 0.139g of magnesium
chloride with crystal water into 1000mL volumetric flask; use distilled water to dissolve
and dilute to the scale.
Method II: take 2.740g of calcium carbonate and 0.276g of magnesium oxide; use a
small amount of 2mol/L hydrochloric acid to dissolve; evaporate to dryness on a water
batch to remove excessive hydrochloric acid. Then use the distilled water to completely
transfer the residue into a 100mL volumetric flask; use distilled water to dilute to the
scale; then take 10mL of such solution into 1000mL volumetric flask; use distilled water
to dilute to the scale.
Method III:
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 1603-2001 be delivered?Answer: The full copy PDF of English version of GB/T 1603-2001 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 1603-2001_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1603-2001_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 1603-2001 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 1603-2001?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1603-2001 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 1603-2001?A step-by-step guide to download PDF of GB/T 1603-2001_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 1603-2001".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|