GB/T 15107-2013 PDF in English
GB/T 15107-2013 (GB/T15107-2013, GBT 15107-2013, GBT15107-2013)
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
GB/T 15107-2013 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
[Including 2018XG] Athletic shoes
| Valid |
GB/T 15107-2005 | English | 359 |
Add to Cart
|
3 days
|
Athletic footwear
| Obsolete |
GB/T 15107-1994 | English | 239 |
Add to Cart
|
2 days
|
Athletic footwear
| Obsolete |
Standards related to (historical): GB/T 15107-2013
PDF Preview
GB/T 15107-2013: PDF in English (GBT 15107-2013) GB/T 15107-2013
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 61.060
Y 78
Replacing GB/T 15107-2005
Athletic Shoes
旅游鞋
ISSUED ON. OCTOBER 10, 2013
IMPLEMENTED ON. JUNE 1, 2014
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 6
4 Product Classification ... 6
5 Technical Requirements ... 7
6 Test Methods ... 11
7 Inspection Items and Qualification Evaluation ... 12
8 Inspection Rules, Marking, Packaging, Transportation and Storage ... 13
Appendix A (Normative) List of Aromatic Amine not Allowed to be
Decomposed from Dye under Reducing Conditions ... 14
Appendix B (Informative) After-sale Service Quality Judgment ... 16
Foreword
This Standard is drafted according to the rules specified in GB/T 1.1-2009.
Compared with GB/T 15107-2005 "Athletic Footwear", the main differences of this
Standard are as follows.
- The application scope of the standard was modified;
- The product classification was modified;
- The recommended value of thickness of primary parts was deleted;
- Inspection items of sensory quality were added, deleted and modified;
- Peeling test method was modified;
- Test method of adhesive properties was modified;
- Indexes of other physical and mechanical properties were modified;
- Requirements for the limit of substances were added;
- Product judgment was modified;
- Inspection rules, marking, packaging, transportation and storage directly quote
the industry standard QB/T 1187 "Footwear - Principle of Inspection and Marking,
Package, Transportation, Storage".
Attention is drawn to the possibility that some contents of this document may involve
patent rights. The issuing organization of this document does not undertake the
responsibility of identifying these patents.
This Standard was proposed by China National Light Industry Council.
This Standard shall be under the jurisdiction of the National Technical Committee on
Shoes of Standardization Administration of China (SAC/TC 305).
Drafting organizations of this Standard. China Leather and Footwear Industry
Research Institute, Li Ning (China) Sports Goods Co., Ltd., ANTA (China) Co., Ltd.,
Qingdao Double Star Group Technological Development Center, Xtep (China) Co.,
Ltd., Quanzhou Huanqiu Shoes and Clothing Co., Ltd., Deerway (China) Co., Ltd.,
Nike Sports (China) Co. Ltd., Maotai (Fujian) Soles Co., Ltd. AND Fujian Quanzhou
Peak Sport Products Co., Ltd.
Chief drafting staffs of this Standard. Qi Xiaoxia, Zhang Weijuan, Huang Jie, Li Su,
Sha Shufen, Peng Liming, Chen Yongpei, Ding Minglu, Gao Zhifang, Ding Si'en and
Dai Jianhui.
The previous editions replaced by this Standard are as follows.
- GB/T 15107-1994, GB/T 15107-2005.
Athletic Shoes
1 Scope
This Standard specifies product classification, technical requirements, test methods,
inspection rules as well as marking, packaging, transportation and storage of athletic
shoes.
This Standard is applicable to athletic footwear, trainer shoes, gym shoes, walking
shoes and jogging shoes for general uses, excluding sports shoes.
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, the dated edition applies to this document. For
undated references, the latest edition of the normative document (including any
amendments) applies.
GB/T 251 Textiles - Tests for Color Fastness Gray Scale for Assessing Staining
GB/T 2703 Footwear - Vocabulary
GB/T 2912.1-2009 Textiles - Determination of Formaldehyde - Part 1. Free and
Hydrolyzed Formaldehyde (Water Extraction Method)
GB/T 3293 Chinese Last Systems
GB/T 3293.1 Shoe Size
GB/T 3903.1-2008 Footwear - General test methods - Flexing Resistance
GB/T 3903.2-2008 Footwear - General test methods - Abrasion Resistance
GB/T 3903.3-2011 Footwear - General Test Methods - Peeling Strength
GB/T 3903.5-2011 Footwear - General Test Methods - Appearance Quality
GB/T 17592-2006 Textiles - Determination of the Banned Azo Colorants
GB/T 19941-2005 Leather and Fur - Chemical Tests - Determination of
Formaldehyde Content
GB/T 19942-2005 Leather and Fur - Chemical Tests - Determination of Banned
Azo Colorants
GB 20400 Leather and Fur - Limit of Harmful Matter
QB/T 1187 Footwear - Principle of Inspection and Marking, Package,
Transportation, Storage
QB/T 2224-2012 Footwear - Performance Requirement for Uppers
Low-Temperature Flexing Resistance
QB/T 2673 Footwear-Specification of Marking
QB/T 2882-2007 Footwear - Test Methods for Uppers Linings and Insocks - Color
Fastness to Rubbing
QB/T 2886-2007 Footwear - Test Methods for Whole Shoe - Upper Sole
Adhesion
QB/T 4108-2010 Metal Accessories for Footwear
3 Terms and Definitions
The definition in GB/T 2703 AND the following terms and definitions are applicable to
this Standard.
3.1
Primary parts
In general situation, they refer to outer side of upper, forepart, counter-heel and
toe-puff parts.
3.2
Subsidiary parts
In the general situation, they refer to inside upper surface and backside.
3.3
Low upper footwear
The shoes of which the upper is lower than tarsus.
4 Product Classification
4.1 By upper materials
It is divided into the following four categories by upper materials.
Materials of lining and insock are sampled. Without lining, the contact surface
between upper and feet is taken as lining for the test.
6.8 Content of decomposable harmful aromatic amine dyes in textiles
6.8.1 Lining and upper are inspected separately, so are different materials. If the
lining and upper fail to be separated, they can be inspected together according to the
inspection methods of lining material.
6.8.2 Textiles are inspected according to GB/T 17592-2006, and the detection limit is
5 mg/kg.
6.9 Content of decomposable harmful aromatic amine dyes in leather
Sample preparation is the same as that in 6.8.1, and the decomposable harmful
aromatic amine dyes in leather are inspected according to the requirements of GB/T
19942-2005, and the detection limit is 30 mg/kg.
Note. Other materials (except textiles) may be inspected by reference to 6.9.
6.10 Content of free or partially hydrolyzed formaldehyde in textiles
Sample preparation is the same as that in 6.7.1; it is inspected according to GB/T
2912.1-2009.
6.11 Content of free or partially hydrolyzed formaldehyde in leather
Sample preparation is the same as that in 6.7.1; it is inspected according to GB/T
19941-2005.
Note. Other materials (except textiles) may be inspected by reference to 6.11.
7 Inspection Items and Qualification Evaluation
7.1 Inspection items shall be in accordance with those specified in Table 7.
Table 7 Inspection Items
Inspection item
Type
inspection
item
End-of-manufacturing
inspection item Performance
requirements
Test
methods
clause
number Each pair
Random
inspection
General requirements ● ○ ○ 5.1 NA
Sensory quality ● ● ● 5.2 6.1
Peel strength of upper sole ● - ● 5.3.1 6.2
Peel strength between sidewall and
upper ● - ● 5.3.1 6.2
Appendix B
(Informative)
After‐sale Service Quality Judgment
B.1 After-sale service period
It shall be determined by the manufacturer according to the product grade, and shall
be clearly declared in the after-sale service specification.
B.2 Judgment of quality problems
Within after-sale service period, it may be judged as quality problem in case of the
following problems under normal wearing.
a) The shoes fail to meet the quality requirements of the product standard;
b) The upper and upper allowance crack, seriously turn white and obviously
change color; finishing layer falls off or chaps;
c) Split stitch and opening;
d) Outsole or inner sole fractures or is uneven so as to affect wearing;
e) It is uneven inside the shoes, so as to affect wearing;
f) Air (liquid) cushion leaks or deflates.
B.3 Inspection method
B.3.1 Sensory inspection is carried out according to the requirements of GB/T
3903.5-2011.
B.3.2 De-coloration. white absorbent cotton or gauze, which has been saturated
with clear-water (no water-drop when pressed by fingers), is pressed gently with
hands; rub repeatedly within 10cm inside the upper for 10 times; then observe the
absorbent cotton or gauze. It shall be free from obvious contamination.
B.4 Handling method
It can be handled according to the after-sale service specification stipulated by
manufacturer, or according to the local unified-provisions where the marketing
organization is located.
...... Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|