GB/T 1451-2005 PDF English
US$70.00 · In stock · Download in 9 secondsGB/T 1451-2005: Fiber-reinforced plastics composites -- Determination of Charpy impact properties Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 1451: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 1451-2005 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Fiber-reinforced plastics composites -- Determination of Charpy impact properties
| Valid |
| GB/T 1451-1983 | English | 199 |
Add to Cart
|
2 days
|
Test method for the charpy impact resistance of glass fiber-reinforced plastics
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 1451-2005
GB/T 1451-2005: Fiber-reinforced plastics composites -- Determination of Charpy impact properties
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT1451-2005
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 83.120
Q 23
Replacing GB/T 1451-1983
Fiber-reinforced Plastics Composites - Determination of
Charpy Impact Properties
Issued on: MAY 19, 2005
Implemented on: DECEMBER 01, 2005
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of PRC;
Standardization Administration of PRC.
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative References... 4
3 Test Principles... 4
4 Specimen... 4
5 Test Equipment... 6
6 Test Conditions... 7
7 Test Procedures... 7
8 Calculation... 7
9 Test Results... 8
10 Test Report... 8
Fiber-reinforced Plastics Composites-Determination of
Charpy Impact Properties
1 Scope
This standard specifies the specimens, equipment, conditions, procedures and results
calculation for measuring the impact properties with Charpy impact method.
This standard is applicable to measure the impact properties of fibre-reinforced
plastics composites specimens with nicks; while the impact properties measurement
of specimens without nicks may refer to this standard.
2 Normative References
The following standard contains provisions which, through reference in the following
text, constitute provisions of this standard. For dated reference, subsequent
amendments (excluding correction) to, or revisions of, any of these publications do
not apply. However, parties to agreements based on this standard are encouraged to
investigate the possibility of applying the most recent editions of the standards
indicated below. For undated references, the latest edition of the normative document
referred to applies.
GB/T 1446—2005 Fiber-reinforced plastics composites-The generals
3 Test Principles
Both ends of specimen with V-nick are horizontally placed on a support; the nick is
back on impact pendulum; then pendulum strike the middle specimen once to make
specimen generate stress concentration during impact and then enable the specimen to
break rapidly.
4 Specimen
4.1 Type and dimension of specimen
4.1.1 Type and dimension of fabric specimen whose nick direction is vertical to
layer are shown in Figure 1.
6 Test Conditions
Test conditions shall meet the provisions specified in Chapter 3 of GB/T 1446-2005.
7 Test Procedures
7.1 Specimen appearance inspection shall meet the provisions specified in Article
4.2 of GB/T 1446-2005.
7.2 Specimen status shall be adjusted according to the provisions specified in Article
4.4 of GB/T 1446-2005.
7.3 Those qualified specimens are numbered; then the width at nick of specimen is
measured and the minimum thickness at nick is measured with projector or other
measuring instrument. In addition, the measuring accuracy shall meet the provisions
stated in Article 4.5.1 of GB/T 1446-2005.
7.4 Pendulum with proper energy is selected so as to ensure the consumed power to
break specimen is within 10%~85% full scale.
7.5 Support span is adjusted to be (70±0.5)mm with sample plate with standard
span.
7.6 Whether spacer shall be added on a support is determined according to specimen
dimension and the position of center impacted by test machine. Spacer dimension
shall be determined basing on test machine conditions.
7.7 Before test, one non-load impact shall be carried out to adjust the pointer of
test-machine reading dial to point to zero.
7.8 The surface with nick of a specimen is back on pendulum. Specimen is placed
with specimen locating plate so as to enable the nick center to align with striking
center.
7.9 Impaction is carried out and the power consumed to break specimen as well as
breaking type shall be recorded.
7.10 Specimen with apparent internal defect or which doesn't break at nick shall be
abolished. Effective specimen amount in the same lot shall meet the provisions stated
in Article 4.3.Otherwise, test shall be carried out again.
8 Calculation
Impact properties is calculated according to the following formula.
Where,
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 1451-2005 be delivered?Answer: The full copy PDF of English version of GB/T 1451-2005 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 1451-2005_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1451-2005_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 1451-2005 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 1451-2005?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1451-2005 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 1451-2005?A step-by-step guide to download PDF of GB/T 1451-2005_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 1451-2005".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|