GB 50620-2020 (GB 50620-2010) PDF English
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 50620-2020 | English | RFQ |
ASK
|
3 days
|
Technical standard for viscose fiber plant
| Valid |
| GB 50620-2010 | English | RFQ |
ASK
|
3 days
|
Code for design of viscose fibre plant
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 50620-2010
Similar standards GB 50694 GB 50620 GB 50620-2010: Code for design of viscose fibre plant---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB50620-2010
NATIONAL STANDARD
OF THE PEOPLE'S REPUBLIC OF CHINA
Code for Design of Viscose Fibre Plant
Issued on: AUGUST 18, 2010
Implemented on: JUNE 1, 2011
Jointly Issued by Ministry of Housing and Urhan-Rural Development of the People's
Rcpuh1ic of China
General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China
NATIONAL STANDARD
OF THE PEOPLE'S REPUBLIC OF CHINA
Code for Design of Viscose Fibre Plant
Chief Development Department. China National Textile and Apparel Council
Approval Department. Ministry of Housing and Urban-Rural Development of the People's Republic
of China
Implementation Date. June 1, 2011
Beijing 2011
NOTICE
This code is written in Chinese and English. The Chinese text shall be taken as the ruling one in
the event of any inconsistency between the Chinese text and the English text.
Announcement of the Ministry of Housing and Urban-Rural
Development of the People's Republic of China
No. 732
Announcement on Publishing the National Standard "Code for Design of
Viscose Fibre Plant"
"Code for Design of Viscose Fibre Plant" has been approved as a national standard with a serial
number of GB 50620-20 I 0 and will be implemented from June I, 2011. Therein, Articles (Items)
4.2.1(5), 5.2.4, 5.2.7, 8.3.2, 8.6.2, 9.4.4, 11.3.6, 12.3.4, 14.2.1 , 15.2.4 and 16.3.4 (3) are compulsory
provisions and must be enforced strictly.
Authorized by the Standard Rating Research Institute of the Ministry of Housing and Urban-
Rural Development of the People's Republic of China, this code is published by China Planning Press.
Ministry of Housing and Urban-Rural Development ofthe People 's Republic of China
August 18, 20 I 0
Foreword
This code was formulated by Jiangxi Textile Industry Scientific Designing Institute jointly with
organizations concerned according to the requirements of Document JIANBIAO [2006] No. 136 issued
by the former Ministry of Construction (MOC)- "Notice on Printing the Development and Revision
Plan (the Second Lot) ofNational Engineering Construction Standards and Codes in 2006".
During the process of formulating this code, the drafting group conducted extensive investigation,
summarized construction experience of viscose fibre plants for over 50 years in China, especially the
digestion and absorption of overseas advanced production technology of viscose fibre in recent years,
as well as the design, construction and processing experience and lesson of viscose fibre plant in China
and extensively asked for opinions, and finalized this code through review.
This code comprises 17 chapters and 5 appendixes; it mainly covers general provisions, terms,
process design, process equipment, piping, auxiliary production facilities, automatic control and instrument,
electrical, general plan, build ing and structure, water supply and drainage, heating, ventilation and air
cond itioning, motive power, environmental protection, safety and health, storage and repair of machine
and electric installations and instrument.
Provisions printed in bold type in this code are compulsory and must be enforced strictly.
The Ministry of Housing and Urban-Rural Development of the People's Republic of China is in
charge of the administration of this code and the explanation of the compulsory provisions; China
National Texti le and Apparel Council is responsible for its routine management and Jiangxi Textile
Industry Scientific Designing Institute is responsible for the explanation of specific technical contents.
During the process of implementing this code, you are kindly requested to send your opinions and
advice to Jiangxi Textile Industry Scientific Designing Institute (Address. No. 966, Gaoxin 5 Rd.,
330096, Nanchang, Jiangxi Province (North Door); post code. 330096; E-mail. [email protected]).
Chief Development Organizations, Participating Development Organizations, Pmticipating Organizations,
Chief Drafting Staffs and Chief Examiners ofthis code.
Chi efDevelopment Organization. Jiangxi Textile Industry Scientific Designing Institute
Pa1ticipating Development Organizat ion. China Textile Industrial Engineering Institute
Henan Textile & Architecture Design Co., Ltd.
Shandong Hailong Engineering Design Co., Ltd.
Participating Organ ization. Henan Xinxiang Bailu Chemical Fiber Co., Ltd.
Chief Drafting Staffs. Li An'an, Nie Jianxin, Chen Liang, Zeng Dongfu, Ren Jianchun,
Jiang Guohua, Wan Yiming, Liu Yan, Huang Hui, Zhu Haibo,
Hu Qirong, Li Wenfa, Hu Pinghua, Wan Renli, Xia Lixin, Xu Chuguang,
Li Guang, Zhang Pishan, Li Yunsheng, Liu Yuxian, Qiu Youlong,
Xi Chunzheng, Chang Chongzhi, Hu Weihong, Shen Xiaozhong,
Dang Lianghu, Meng Fanjian, Sun Lin and Zong Xianguo
Chief Examiners. Huang Chengp ing, Liu Chengbin, Gao X iaomao, Rong Jiming, Li Xiongzhao,
Chen Yongqiang, Dou Benliang, Zheng Nianping, Deng Huaxin, Liu Fu' an,
Sheng Jiahua, Liu Feng, Liu Bo, Huang Liemin, Liu Songyu, Lan Qingming
Table of Contents
General Provisions ... I
2 Tern1s ... 2
3 Process Design ... 4
3. 1 General Requirements ... 4
3 .2 Process ... 4
3.3 Design Requirements ... 6
3 .4 Energy-saving and Water-saving ... 7
4 Process Equip1nent ... 8
4.1 General Requirements ... 8
4.2 Equip1nent Selection ... 8
4.3 Equi p1nent Layout ... 9
5 Piping ... 10
5.1 General Requiren1ents ... 10
5.2 Piping Layout and Selection of Piping Materials ... 10
6 Auxi liary Production Facilities ... 13
6. I General Requirements ... 13
6.2 Chemical Laboratory and Physical Testing Room ... 13
7 Automatic Control and Instrument ... 14
7.1 General Requirements ... 14
7.2 Level of Automatic Control ... 14
7.3 Main Plan for Measurement and Control System ... 14
7.4 Selective Provision for Automatic Control Equipment... 14
7.5 Selection of Special Instrument... I 5
7.6 Safety Technical Measures of Instrument ... 15
8 Electrical... 17
8.1 General Requirements ... 17
8.2 Grades of Power Load and the Requirements of Power Supply ... 17
8.3 Power Supply and Distribution System ... 17
8.4 Lightening ... 19
8.5 Lightening Protection ... 19
8.6 Anti-static and Grounding System ... 20
8.7 Automatic Fire Alarm System ... 20
8.8 Electrical Design for Explosive Atmosphere and Fire Hazard ... 20
9 General Plan ... 21
9.1 General Requirements ... 21
9.2 General Layout Design ... 21
9.3 Vertical Design ... 23
9.4 Combined Pipeline ... 23
10 Building and Structure ... 24
10.1 General Requirements ... 24
I 0.2 Production Workshop and Auxiliary Facilities ... 24
I 0.3 Fire-protection, Explosion-protection and Corrosion-protection of Building ... 25
I 0.4 Structure Form and Constructional Details ... 25
11 Water Supply and Drainage ... 27
11.1 Water Supply ... 27
11.2 Drainage ... 29
11.3 Fire Water Supply ... 30
12 Heating, Ventilation and Air Conditioning ... 31
12.1 General Requirements ... 31
12 .2 Heating ... 32
12.3 Ventilation ... 33
12.4 Air Conditioning ... 33
12.5 Equi pment Selection and Other Requirements ... 34
13 Motive Po,ver ... 35
13.1 Heat Supply Systetn ... 35
13.2 Refrigeration Station ... 3 5
13.3 Compressed Air and Nitrogen Station ... 36
14 Environtnental Protection ... 38
14.1 General Requiren1ents ... 38
14.2 Waste Gas Treattnent ... 38
14.3 Waste Water Treatn1ent ... 39
14.4 Solid Waste Treatment ...
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
|