GB 32087-2015 PDF English
US$75.00 · In stock · Download in 9 secondsGB 32087-2015: Towing devices for light-duty vehicle Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 32087-2015 | English | 75 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Towing devices for light-duty vehicle
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 32087-2015
GB 32087-2015: Towing devices for light-duty vehicle---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB32087-2015
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.020
T 09
Towing Devices for Light-Duty Vehicle
Issued on. OCTOBER 09, 2015
Implemented on. JULY 01, 2016
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of PRC.
Table of Contents
Foreword... 3
1 Scope... 4
2 Normative References... 4
3 Terms and Definitions... 4
4 Technical Requirements... 4
5 Test Methods... 6
6 Transition Period Requirements for Standard Implementation... 7
Foreword
The Clauses 4 and 5 in this Standard are mandatory, while the rest are
recommended.
This Standard was drafted as per the rules specified in GB/T 1.1-2009.
This Standard was proposed by Ministry of Industry and Information Technology.
This Standard shall be under the jurisdiction of National Technical Committee for
Standardization of Automobile (SAC/TC 114).
Drafting organizations of this Standard. China Automotive Technology & Research
Center; Lingyun Industrial Co., Ltd.; SAIC-GM-Automobile Co., Ltd.; Pan Asia
Technical Automotive Center Co., Ltd.; Anhui Jianghuai Automobile Co., Ltd.; China
Automotive Engineering Research Institute Co., Ltd.; Volkswagen (China) Investment
Co., Ltd.; Toyota Motor Engineering & Manufacturing (China) Co., Ltd.; Daimler
Northeast Asia Ltd.; and BMW China Service Ltd.
Chief drafting staffs of this Standard. Sun Zhendong, Zeng Xiurong, Li Yanbo, Chen
Yonghui, Wei Haiyan, Sun Houyong, Rong Shengjun, Kang Yiyi, Lu Bin, Yin Lei, Zang
Pengpeng, Liu Dan, Zheng Wenjie, and Zhang Yue.
Towing Devices for Light-Duty Vehicle
1 Scope
This Standard specifies the technical requirements and test methods of the towing
devices for light-duty vehicle.
This Standard is applicable to the Type-M and Type-N1 vehicles with the maximum
allowable total mass of no greater than 3500kg.
2 Normative References
The following documents are essential to the application of this document. For the
dated documents, only the versions with the dates indicated are applicable to this
document; for the undated documents, only the latest version (including all the
amendments) are applicable to this document.
GB/T 3730.2 Road Vehicle – Masses - Vocabulary and Codes
GB/T 15089 Classification of Power-Driven Vehicles and Trailers
3 Terms and Definitions
For the purposes of this document, the terms and definitions given in GB/T 15089 and
GB/T 3730.2 and the following apply.
3.1 Towing device
The components fixed or mounted on the vehicle, connected by means of tow rope,
towline or tow bar, so that realize the towing or being towed of the vehicle.
4 Technical Requirements
4.1 General requirements
4.1.1 The vehicle shall be fixed or mounted at least one towing device on the front.
4.1.2 If the vehicle is equipped with towing device at the rear part, then the towing
device shall meet the technical requirements of this Standard.
4.1.3 The outermost end of the towing device shall not protrude from the vertical
projection of the outer contour of the vehicle on the horizontal plane, except when in
traction state.
4.2 Strength requirements
4.2.1 Test according to the provisions of Clause 5 in this Standard, the minimum static
load F that the towing device can be able to withstand is calculated as per the Formula
(1).
5 Test Methods
5.1 Test conditions
5.1.1 The test shall be carried out on the same vehicle using the same towing device;
the vehicle under test shall be in the kerb mass state, and fixed on a horizontal surface.
5.1.2 It is allowed to be carried out on a body or chassis that is completely equivalent
to the actual vehicle;
5.2 Static load test
5.2.1 Separately apply the static load F of the horizontal tension and horizontal
compression to the towing device; the direction of static load F is parallel to the
longitudinal centerline of the vehicle.
6 Transition Period Requirements for Standard Implementation
For the production model, it shall be implemented 12 months after the implementation
date of this Standard.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 32087-2015 be delivered?Answer: The full copy PDF of English version of GB 32087-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 32087-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB 32087-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 32087-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB 32087-2015?A step-by-step guide to download PDF of GB 32087-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 32087-2015".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|