GB 19517-2009 (GB 19517-2023 Newer Version) PDF English
GB 19517-2009 (GB19517-2009) PDF English
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
GB 19517-2023 | English | 320 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
National technical specification for the safety of electric equipments
| Valid |
GB 19517-2009 | English | 85 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
National safety technical code for electric equipment
| Valid |
GB 19517-2004 | English | 719 |
Add to Cart
|
5 days
|
National safety technical code for electric equipment
| Obsolete |
Newer version: GB 19517-2023 Standards related to (historical): GB 19517-2023
GB 19517-2009: PDF in English GB 19517-2009
GB
ICS 29.020
K 09
NATIONAL STANDARD
OF THE PEOPLE'S REPUBLIC OF CHINA
Replacing GB 19517-2004
National Safety Technical Code for
Electric Equipment
ISSUED ON. SEPTEMBER 23, 2009
IMPLEMENTED ON. OCTOBER 01, 2010
Jointly issued by. General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3
Introduction ... 5
1 General Provisions ... 6
2 Safety Technical Requirements ... 7
3 Inspection ... 10
4 Implementation and Supervision ... 11
Appendix A ... 12
Appendix B ... 32
References ... 35
Foreword
All technical contents of this standard are compulsory.
This standard replaces GB 19517-2004 "National Safety Technical Code for Electric
Equipment".
Compared with GB 19517-2004, the main differences of this standard are as follows.
— In Application Scope of 1.1 General Provisions, the lower limit value 50V of AC
voltage and lower limit value 75V of DC voltage of electrical equipment are
deleted, so it makes this standard also applicable to electric product of extra-low voltage
range;
— In Application Scope of 1.1 General Provisions, "...below 1500V AC rated
voltage," is changed into "...below 1200V AC rated voltage,";
— "Validity period of inspection report is 12 months" in 3.3.2 is deleted;
— In Appendix A, newly add the relevant national standards on top of the previous 15
professional compliance standards; add the national standards relevant to 4 professions
such as small fuses, industrial electric heating equipment, electrical electronic
environment (fire hazard test), and low voltage surge protector; Correspondingly make
the amendment to the previously-included professional standards; the compliance
standards in Appendix A are increased to 331 from previous 164;
— Appendix B is compiled according to the requirements of GB/T 1.1. And the English
that corresponds to the terms and vocabulary.
The standards listed in Appendix A are the un-dated compliance standards to meet the necessary
safety element of electrical equipment and various professional products; it is normative.
Appendix B is also normative.
This standard was proposed by China Electrical Equipment Industry Association.
This standard shall be under the jurisdiction of National Technical Committee on Electric
Safety of Standardization Administration of China (SAC/TC 25).
Drafting organizations of this standard. Mechanical Industry-Beijing Electrotechnics
Economics Institute, and Shanghai Electric Tool Research Institute
Participating drafting organizations of this standard. Shanghai Electrical Apparatus Research
Institute (Group) Co., Ltd., Shanghai Electric Cable Research Institute, China National Electric
Apparatus Research Institute, Guilin Electrical Equipment Scientific Research Institute,
Guangdong Supervision and Test Center for Product Quality, Xi'an Power Electronics
Research Institute, Xuchang Relay Research Institute, Nanyang Explosion Protected Electrical
Apparatus Research Institute, Zhengtai Electric Holdings Co., Ltd., Beijing ABB Low Voltage
Apparatus Co., Ltd., Qingdao Ainuo Instrument Co., Ltd., and Schneider Electric (China)
Investment Co., Ltd.
Chief drafting staffs of this standard. Li Feng, Fang Xiaoyan, Li Bangxie, Chen Kun, Liu Jiang,
Ji Huiyu, Zeng Yanhong, Yang Qiming, Liu Shichang, Wang Xuelin, Luo Huaiping, Bao Ge,
Xiang Yali, Liu Wen, Wei Hongqi, Lai Jing, and Zhang Gang.
Participating drafting staffs of this standard. Li Chunfa, Wang Zhongdan, He Caifu, and Yang
Zhifeng.
The previous edition replaced by this standard is.
— GB 19517-2004.
Introduction
The establishment of this standard is aimed to achieve optimum balance of overall safety level
among people, environment and product; make the design, manufacturing, sales and application
of electrical equipment to reduce the risk to life, health and property damage to maximum extent;
and reach acceptable level.
The professional safety standards of various electric products must comply with this standard.
And combine the necessary safety elements in technical codes WITH the characteristic of
various electric products to supplement the corresponding data, provisions and special
requirements.
This standard specifies the general common safety requirements of electrical equipment. The
safety requirements of specific products are specified by the product standards. Both shall be used
concurrently.
This standard is consisted of main text of which the essential safety elements are the technical
body AND normative Appendix A which lists out various compliance standards. The relation of
the main text and normative Appendix A is the relation of requirements versus the compliance and
being recognized.
The electrotechnical materials such as conductor materials, insulating materials, flexible cables
and flexible wires are important parts of safety essential elements. The electrotechnical material
standards meeting above provisions are also listed in normative Appendix A.
This standard only provides the common principle requirements to the safety essential elements
such as data, limit or permissible value, technical requirements and precautionary measures. The
specific and detail requirements and measures are supplemented and enhanced in compliance
standards listed in normative Appendix A.
The test methods, inspection rules and methods in essential safety elements are specified by the
compliance standards listed in normative Appendix A.
According to actual demand, the compliance standards listed in normative Appendix A may be
increased and decreased if it is scientific, appropriate and reasonable. Under the condition that
it does not compromise the overall level of the product safety, the compliance standards are not
necessary to satisfy all of the essential safety elements of this standard; it may be supplemented or
modified.
National Safety Technical Code for Electric Equipment
1 General Provisions
1.1 This standard is applicable to all kinds of electrical equipment - below 1200V AC rated
voltage and below 1500V DC rated voltage. These electrical equipment include.
— The electrical equipment that are used and contacted by unskilled persons according to
design purpose or directly hand-held operated by users;
— The electrical equipment that are used at electrical workplace or closed electrical workplace
and mainly or completely operated by professional or basically-trained persons.
1.2 The electrical equipment designed, manufactured, sold and used in China must be in
accordance with this standard. The implementation of the export products may be in accordance
with the contract provisions.
1.3 This standard specifies the general safety technical requirements of electrical equipment during
design, manufacture, sales and application. It is used for.
— Structure foundation of safety technical contents of all kinds of electric products;
— For the electric products without professional safety standard, the safety level shall be
preliminarily evaluated;
— Technical foundation for design, manufacture, sales and application of electrical
equipment.
1.4 If other laws and regulations specify otherwise safety requirements for electrical equipment,
the electrical equipment shall also meet the corresponding requirements.
The safety technical requirements of electrical equipment specified in this standard shall be
specifically detailed in the professional standards of electrical equipment, and shall be specified
according to the corresponding demonstration, verification and supplementary technical data.
1.5 This standard is not applicable to.
— The materials and auxiliary materials of electrical equipment that are not specified in this
standard;
— The primary products or semi-finished products that are incapable of independent operation;
— The electrical equipment used for medical treatment purpose;
— The electrical equipment used in explosion environment;
— Elevator;
— Electric palisade energizer;
— Special electrical equipment such as ship, aerial vehicle and railway.
1.6 "Hazard" indicated in this standard excludes the hazard generated by inappropriate
installation and maintenance of electrical equipment; and the hazard owing to no electrical
common rapidly and non-dangerously operated switch;
— There may appear auxiliary hazard when switching off some unit;
— The electrical equipment that can not be holistically monitored from the control panel.
2.6.4 The electrical equipment that have observation maintenance area or have such requirements
that need human body part (such as hand) to put into the maintenance area during installation,
maintenance, inspection an...
...... Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|