GB 1886.41-2015 PDF English
US$140.00 · In stock · Download in 9 secondsGB 1886.41-2015: National Food Safety Standard -- Food Additives -- Yellow gum Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 1886.41-2015 | English | 140 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
National Food Safety Standard -- Food Additives -- Yellow gum
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 1886.41-2015
GB 1886.41-2015: National Food Safety Standard -- Food Additives -- Yellow gum---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB1886.41-2015
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
National food safety standard - Food additives - Yellow gum
ISSUED ON: SEPTEMBER 22, 2015
IMPLEMENTED ON: MARCH 22, 2016
Issued by: Health and Family Planning Commission of PRC
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Structural formula ... 4
3 Technical requirements ... 4
Appendix A Inspection method ... 6
National food safety standard - Food additives - Yellow gum
1 Scope
This standard applies to the food additive yellow gum, which is produced by
Xanthomonas campestris, as the producing bacteria AND the starch as the main raw
material, fermented by specific organisms, purified, dried, pulverized.
2 Structural formula
3 Technical requirements
3.1 Sensory requirements
Sensory requirements shall meet the requirements of Table 1.
3.2 Physical and chemical indicators
Physical and chemical indicators shall meet the requirements of Table 2.
Appendix A
Inspection method
A.1 General provisions
The reagents and water, which are used in this standard, refer to analytically pure
reagents and grade-3 water as specified in GB/T 6682, unless otherwise specified. The
standard solution used in the test, AND the standard solution, preparations, products for
impurity determination, shall be prepared in accordance with the provisions of GB/T
601, GB/T 602, GB/T 603, unless otherwise specified. The solution, which is used in
the test, refers to the aqueous solution, when the solvent is not specified.
A.2 Identification test
A.2.1 Solubility test
Weigh 1 g (accurate to 0.01 g) of specimen. Slowly pour it into a beaker, which contains
100 mL of water. Soak it for 15 min. Carefully immerse the stirring rod in the water.
Slowly turn on the stirrer, to a speed of 200 r/min. After 25 min, it can be completely
dissolved. According to this method, add the specimen into ethanol, acetone or ether,
without dissolving.
A.2.2 Gel test
Add 300 mL of water into a 500 mL beaker. Preheat to 80 °C. Turn on the stirrer, to 200
r/min. Add 1.5 g of dry specimen and locust bean gum (accurate to 0.01 g), while
stirring, until the mixture forms a solution. Continue to stir, for more than 30 minutes
(the water temperature is not lower than 60 °C during the stirring process). Stop stirring.
Cool it at room temperature, for at least 2 h. When the temperature drops below 40 °C,
a gel will form. Prepare a 1% specimen solution, according to this method, as a control,
without adding locust bean gum; there is no such gel.
A.3 Determination of viscosity
A.3.1 Instruments and equipment
Brookfield rotational viscometer or other viscometer of equivalent performance.
A.3.2 Measurement conditions
A.3.2.1 Rotor model: No.3 rotor.
A.3.2.2 Rotor speed: 60 r/min.
A.3.2.3 Measurement temperature: 24 °C ~ 25 °C.
A.3.3 Analysis steps
A.3.3.1 Prepare a solution containing 1% specimen and 1% potassium chloride
A.3.3.1.1 Use clean and dry weighing paper, to weigh 3 g of specimen and potassium
chloride (accurate to 0.01 g), respectively. Mix them evenly.
A.3.3.1.2 Measure 300 mL of distilled water. Pour it into a 400 mL beaker.
A.3.3.1.3 Put the beaker, which contains the water, under the stirrer. Turn on the stirrer.
Slowly add the mixed specimen to the water, between the stirring blade and the wall of
the beaker. Start timekeeping. Make stirring continuously at 800 r/min, for 2 h. The
temperature is kept at 24 °C ~ 25 °C.
A.3.3.1.4 Stop stirring. Take out the beaker. Turn the solution up and down a few times,
by a stirring rod or the like.
A.3.3.2 Determination
Take an appropriate amount of the solution, which contains 1% specimen and 1%
potassium chloride. Put it in a 100 mL high beaker. Measure it under the specified
measurement conditions.
A.4 Determination of shear property values
A.4.1 Determination method
According to A.3, measure the viscosity of No.3 rotor, at 6 r/min and 60 r/min,
respectively.
A.4.2 Result calculation
Shear property value, N, is calculated according to formula (A.1):
Where:
η1 - The viscosity value, when the rotation speed is 6 r/min, in centipoise (cP);
η2 - The viscosity value, when the rotation speed is 60 r/min, in centipoise (cP).
A.5 Measurement of loss on drying
A.5.1 Method summary
Dry the specimen to a constant weight, at a certain temperature. Calculate the mass of
the lost material.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 1886.41-2015 be delivered?Answer: The full copy PDF of English version of GB 1886.41-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 1886.41-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB 1886.41-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 1886.41-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB 1886.41-2015?A step-by-step guide to download PDF of GB 1886.41-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 1886.41-2015".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|