GB 1886.329-2021 PDF English
US$125.00 · In stock · Download in 9 secondsGB 1886.329-2021: National food safety standard - Food additives - Dibasic sodium phosphate Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB 1886.329-2021 | English | 125 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
National food safety standard - Food additives - Dibasic sodium phosphate
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB 1886.329-2021
GB 1886.329-2021: National food safety standard - Food additives - Dibasic sodium phosphate---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GB1886.329-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
National food safety standard Food additives - Dibasic
sodium phosphate
ISSUED ON: FEBRUARY 22, 2021
IMPLEMENTED ON: AUGUST 22, 2021
Issued by: National Health Commission of the People's Republic of China;
State Administration for Market Regulation.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Molecular formula and relative molecular mass ... 4
3 Technical requirements ... 4
Annex A (informative) Detection limit of different matrix specimens ... 6
National food safety standard Food additives -
Disodium dihydrogen pyrophosphate
1 Scope
This Standard is applicable to the food additive, disodium dihydrogen
pyrophosphate, that is produced with sodium carbonate (or sodium hydroxide)
and food additive phosphoric acid (including wet-process phosphoric acid) as
raw materials.
2 Molecular formula and relative molecular mass
2.1 Molecular formula
Na2HPO4·nH2O (n=0, 2, 12)
2.2 Relative molecular mass
Na2HPO4 141.96 (according to 2018 international relative atomic mass)
Na2HPO4·2H2O 177.99 (according to 2018 international relative atomic mass)
Na2HPO4 12H2O 358.14 (according to 2018 international relative atomic mass)
3 Technical requirements
3.1 Sensory requirements
The sensory requirements shall meet the requirements of Table 1.
3.2 Physical and chemical indicators
The physical and chemical indicators shall meet the requirements of Table 2.
Annex A
(informative)
Detection limit of different matrix specimens
WARNING: Some reagents used in this test method are toxic or corrosive,
so be careful when operating! When necessary, it shall be carried out in a
fume hood. If splashed on the skin or eyes, rinse immediately with plenty
of water. Severe cases shall be treated immediately.
A.1 General provisions
The reagents and water used in this Standard refer to analytically-pure reagents
and the grade three water specified in GB/T 6682 when other requirements are
not indicated. The standard titration solution, standard solution for impurity
determination, preparations and products used in the test are all prepared in
accordance with the provisions of GB/T 601, GB/T 602, and GB/T 603 when
other requirements are not specified. The solution used refers to an aqueous
solution when it is not specified which solvent is used for preparation.
A.2 Identification test
A.2.1 Reagents and materials
A.2.1.1 Hydrochloric acid.
A.2.1.2 Nitric acid solution: 1+8.
A.2.1.3 Ammonia solution: 1+1.
A.2.1.4 Silver nitrate solution: 17g/L.
A.2.2 Instruments and equipment
Platinum wire: The platinum wire is fired on one end of the glass rod, and the
top of the platinum wire is bent into a small ring.
A.2.3 Identification methods
A.2.3.1 Identification of phosphate ion
Weigh about 1.0g of specimen to dissolve in 20mL of water. Add silver nitrate
solution to produce yellow precipitate. This precipitate can be dissolved in
ammonia solution or nitric acid solution.
A.2.3.2 Identification of sodium ion
standard titration solution consumed by the titration between these two sudden
points (pH≈4.0 to pH≈8.8).
A.3.5 Result calculation
The volume V1 of the hydrochloric acid standard titration solution consumed by
the specimen solution is calculated according to formula (A.1).
Where,
40 - The volume of added hydrochloric acid standard titration solution, in
milliliters (mL);
c1 - The concentration of hydrochloric acid standard titration solution, in moles
per liter (mol/L);
V - The volume of sodium hydroxide standard titration solution is consumed
when the specimen solution is titrated to pH≈4.0 when the sudden overshoot
occurs, in milliliters (mL);
c2 - The concentration of sodium hydroxide standard titration solution, in moles
per liter (mol/L).
When V1×c1≤V2×c2, the mass fraction w1 of disodium hydrogen phosphate
(Na2HPO4) is calculated according to formula (A.2).
When V1×c1 >V2×c2, the mass fraction w1 of disodium hydrogen phosphate
(Na2HPO4) is calculated according to formula (A.3).
Where,
V1 - The volume of hydrochloric acid standard titration solution consumed when
the sample solution is titrated to pH≈4.0 when the sudden jump point occurs, in
milliliters (mL);
c1 – The concentration of hydrochloric acid standard titration solution, in moles
per liter (mol/L);
A.5 Determination of water insoluble matter
A.5.1 Instruments and equipment
A.5.1.1 Glass sand crucible: aperture is 5μm~15μm.
A.5.1.2 Electric heating constant temperature drying oven: The temperature
control range is 105°C±2°C.
A.5.2 Analysis steps
Weigh about 20g of specimen, to the nearest of 0.01g. Place in a 500mL beaker.
Add 250mL of water. Heat to boil. While it is hot, use the glass sand crucible
that has been pre-dried to constant mass at 105°C±2°C to filter. Use 200mL of
hot water to wash in 10 times. Then put the glass sand crucible together with
the water-insoluble matter in an electric heating constant temperature drying
box. Dry at 105°C±2°C to constant mass.
A.5.3 Result calculation
The mass fraction w3 of water-insoluble matter is calculated according to
formula (A.5).
Where,
m4 - The mass of glass sand crucible and water insoluble matter after drying, in
grams (g);
m5 - The mass of glass sand crucible, in grams (g);
m6 - The specimen mass, in grams (g).
The test results are subject to the arithmetic mean of the parallel determination
results. The absolute difference between two independent determination results
obtained under repeatability conditions is not more than 0.03%.
A.6 Determination of lead (Pb)
Determine according to the method of GB 5009.75 or GB 5009.12. The water
used in the test is grade two water specified in GB/T 6682.
A.7 Determination of arsenic (As)
Determine according to the method of GB 5009.76 or GB 5009.11. The water
used in the test is grade two water specified in GB/T 6682.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB 1886.329-2021 be delivered?Answer: The full copy PDF of English version of GB 1886.329-2021 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB 1886.329-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB 1886.329-2021_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB 1886.329-2021 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB 1886.329-2021?A step-by-step guide to download PDF of GB 1886.329-2021_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB 1886.329-2021".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|