Powered by Google www.ChineseStandard.net Database: 189760 (15 Jun 2024)

GB 1886.127-2016 PDF in English

GB 1886.127-2016 (GB1886.127-2016) PDF English
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB 1886.127-2016English85 Add to Cart 0-9 seconds. Auto-delivery. National Food Safety Standard -- Food Additives -- Hawthorn nuclear smoked flavouring material I, II Valid

PDF Preview

Standards related to: GB 1886.127-2016

GB 1886.127-2016: PDF in English

GB 1886.127-2016
National food safety standard – Food additives –
Hawthorn nuclear smoked flavoring material I, II
Issued by. National Health and Family Planning Commission of the PRC
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of contents
1 Scope ... 3 
2 Terms and definitions ... 3 
3 Technical requirements ... 3 
Appendix A Testing method ... 5 
National food safety standard – Food additives –
Hawthorn nuclear smoked flavoring material I, II
1 Scope
This standard applies to the water-soluble hawthorn nuclear smoked flavoring
material I and II which uses the hawthorn nuclear as the raw material AND is
produced by such methods as dry distillation (anaerobic cracking),
condensation, separation and other methods at the temperature of not more
than 800 °C.
This standard does not apply to the products manufactured by the
water-insoluble oily substances and their products and other materials or by
other methods, such as wood acid and the like.
2 Terms and definitions
2.1 Hawthorn nucleus
It refers to the particles produced by water washing and natural drying of the
hawthorn nucleus which has a unique aroma and color. It shall not add other
wood material or ingredients which may remove the original flavor.
2.2 Hawthorn nucleus smoked flavoring material
It refers to the product using the hawthorn nuclear as raw material which is
subjected to dry distillation at 800 °C to produce fumigation, that is further
condensed, separated, and refined. It is a complex compound which is
composed of multiple smoked ingredients.
2.3 Hawthorn nucleus smoked flavoring material I
It refers to the fraction which is collected at 85 °C ~ 110 °C from the distillation
of smoked condensate at normal pressure, is in light yellow to orange, AND
has the smoked flavor.
2.4 Hawthorn nucleus smoked flavoring material II
It refers to the aqueous phase portion as refined from the smoked condensate
after separation between water phase and oil phase. It is soluble in water, has
the reddish brown to tan color, and has the smoked flavor.
3 Technical requirements
3.1 Sensory requirements
Sensory requirements shall comply with the requirements of Table 1.
Appendix A
Testing method
A.1 General provisions
The reagents and water used in this standard, unless otherwise specified,
refers to the analytical pure reagents and the level III water as specified in
GB/T 6682. The standard solutions, impurity standard solutions, preparations
and products used in the tests shall be prepared in accordance with the
provisions of GB/T 601, GB/T 602 and GB/T 603, unless otherwise specified.
The solution used in the test, unless otherwise specified of the solvent, refers
to the aqueous solution.
A.2 Determination of phenol content (expressed as 2,6-dimethoxyphenol)
- modified Gibbs method
A.2.1 Method summary
The phenolic compounds in the smoked solution react with the colorant
2,6-dihydroquinone chloroimine (2,6-DcGc) in alkaline boric acid-potassium
chloride buffer to form blue indophenol. After forming the color, the absorbance
A is measured at 560 nm AND it is quantified by the absorbance standard
curve of guaiacol (or other known phenol). This method cannot distinguish
between the various phenols, BUT can only provide the total phenol content of
A.2.2 Reagents and materials
A.2.2.1 Boric acid-potassium chloride buffer solution. pH = 8.3. 125 mL of 0.4
mol/L boric acid solution; 125 mL of 0.4 mol/L potassium chloride solution; 40
mL of 0.2 mol/L sodium hydroxide solution. MIX these three solutions; USE
water to dilute it to 1000 mL.
A.2.2.2 NaOH solution. 6 g/L.
A.2.2.3 Developer solution. WEIGH 0.25 g of 2,6-dihydroquinone chloride
imine in 30 mL of absolute ethanol; COOL it before storage.
A.2.2.4 Guaiacol standard solution. USE water to prepare 1 μg/mL ~ 20 μg/mL
standard solution, to draw the standard curve of absorbance A and the
guaiacol concentration B (μg/mL).
A.2.2.5 Smoked sample solution. TAKE 0.5 mL of hawthorn nuclear smoked
flavor, USE water to dilute it to 1000 mL (dilution factor is dependent on the
concentration of sample, so that the absorbance A of the sample dilution is
between 0.2 ~ 0.7).
The total carbonyl compound in the smoked flavor material and the
2,4-dinitrophenyl hydrazine (abbreviated as 2,4-DNPH) are converted to a red
hydrazone derivative at 60 °C in an acidic medium, AND the absorbance A is
measured at 430 nm, so as to calculate the content of the carbonyl compound
(expressed as heptanal or other known aldehydes).
A.3.2.2 Reagents and materials
A. Methanol free of carbonyl compounds. ADD 1% 2,4-DNPH into
methanol; ADD several drops of hydrochloric acid; LET it backflow for 3 h;
A. 2,4-DNPH saturated solution. USE the methanol free of carbonyl
compounds to dissolve 2,4-DNPH; DILUTE it to make its content reach to
0.05%; SHAKE it for 1 h or PREPARE it 24 h in advance. It shall have the
precipitation of insoluble 2,4-DNPH; FILTER and PRESERVE it, AND the shelf
life is one week.
A. Potassium hydroxide solution. ADD 10 g of potassium hydroxide into
20 mL of water; USE the methanol free of carbonyl compounds to dilute it to
100 mL.
A. 2-Butanone standard solution. USE the methanol free of carbonyl
compounds to prepare 10 mg/100 mL of 2-butanone standard solution, which
is used to draw the standard curve of absorbance A-2-butanone concentration
(mg/100 mL).
A. 0.05% sample solution. TAKE 1 mL of sample solution; USE water to
dilute it to 200 mL. TAKE 1 mL of dilution; USE the methanol free of carbonyl
compounds to dilute it to 10 mL (total dilution ratio 1.2000).
A.3.2.3 Instruments and equipment
A.3.2.4 Analytical procedures
A. ADD 1 mL of 2,4-DNPH to each of the three measuring cylinders.
Then ADD 1 mL of sample solution into the first measuring cylinder. ADD 1 mL
of 2-butanone standard solution into the second measuring cylinder. ADD 1 mL
of methanol free of carbonyl compound into the third measuring cylinder as the
blank control.
A. Accurately ADD 0.05 mL of hydrochloric acid to all measuring
cylinders; MIX it thoroughly; PLACE it in a 50 °C water bath to heat it for 30
A. After rapid cooling, ADD 5 mL of potassium hydroxide solution into
each measuring cylinder.
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.