FZ/T 82002-2016 PDF English (FZ/T 82002-2006: Older version)
Search result: FZ/T 82002-2016 (FZ/T 82002-2006 Older version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| FZ/T 82002-2016 | English | 135 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Woven caps
| Valid |
| FZ/T 82002-2006 | English | 439 |
Add to Cart
|
3 days
|
Woven caps
| Obsolete |
| FZ/T 82002-1992 | English | 479 |
Add to Cart
|
4 days
|
Woven caps
| Obsolete |
FZ/T 82002-2016: PDF in English (FZT 82002-2016) FZ/T 82002-2016
FZ
TEXTILE INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 61.040
Y 75
Replacing FZ/T 82002-2006
Woven Caps
缝制帽
ISSUED ON: APRIL 5, 2016
IMPLEMENTED ON: SEPTEMBER 1, 2016
Issued by: Ministry of Industry and Information Technology of the People’s
Republic of China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Requirements ... 6
4 Inspection Methods ... 9
5 Inspection Rules ... 11
6 Marking, Packaging, Transportation and Storage ... 15
Woven Caps
1 Scope
This Standard specifies the requirements, inspection methods, inspection rules, as well as
marking, packaging, transportation and storage of woven caps.
This Standard is applicable to woven caps produced with textile woven fabric as the main raw
material.
2 Normative References
The following documents are indispensable to the application of this document. In terms of
references with a specified date, only versions with a specified date are applicable to this
document. In terms of references without a specified date, the latest version (including all the
modifications) is applicable to this document.
GB/T 250 Textiles - Tests for Color Fastness - Grey Scale for Assessing Change in Color
GB/T 3921-2008 Textiles - Tests for Color Fastness - Color Fastness to Washing with Soap or
Soap and Soda
GB/T 4841.3 Color Cards of Standard Depths for Dyeing with Dyestuffs 2/1, 1/3, 1/6, 1/12,
1/25
GB 5296.4 Instructions for Use of Products of Consumer Interest - Part 4: Textile and Apparel
GB/T 8427-2008 Textiles - Tests for Color Fastness - Color Fastness to Artificial Light: Xenon
Arc Fading Lamp Test
GB/T 8629-2001 Textiles - Domestic Washing and Drying Procedures for Textile Testing
GB/T 8630 Textiles - Determination of Dimensional Change in Washing and Drying
GB 18401 National General Safety Technical Code for Textile Products
GB/T 21294 Testing Methods of Physical and Chemical Performance of Garments
GB/T 21295 Requirements of Physical and Chemical Performance of Garments
GB/T 29862 Textiles - Identification of Fiber Content
GB/T 33271 Woven Garments for Infants
FZ/T 80002 Marking, Packaging, Transportation and Storage for Garments
FZ/T 80004 Rule for Garments Delivery Inspection
FZ/T 80007.3 Dry Wash Resistance Test Method for Garments Used Adhesive Interlining
FZ/T 80010 Clothes-survey Method for Human Body Head Round and Size Designation for
Headwear
3 Requirements
3.1 Instructions for Use
The instructions for use shall comply with the stipulations of GB 5296.4. Specifically speaking,
the method of marking the specification designation and the position of label placement of
finished products shall comply with the stipulations of FZ/T 80010. The maintenance of infants
and young children’s products shall not be dry-cleaned.
3.2 Allowable Deviations of Specifications and Sizes
The specifications of the main parts are set by the enterprise itself. The allowable deviations of
specifications and sizes shall comply with the stipulations of Table 1.
3.3 Raw Materials
3.3.1 In accordance with the relevant national textile standards, select raw materials that comply
with the quality requirements of this Standard.
3.3.2 The fillers are selected from the fibers or their products that comply with the requirements
in accordance with the relevant national standards.
3.3.3 Use buttons (except decorative buckles) and other accessories suitable for the fabric used.
The buttons, buckles and other accessories shall have a clean surface, and free from burrs,
defects, imperfections, accessible sharp points and edges. The appearance of accessories for
infants and young children shall not be similar to that of food; buttons composed of two or more
rigid parts must not be used; the maximum size of the accessories shall be greater than 3 mm.
NOTE: the accessible sharp points and edges refer to sharp points and edges on finished products
that may cause injury to human skin under normal wearing conditions.
3.4 Appearance
3.4.1 The chromatic aberration of the product fabric is not lower than Level-4, and the
chromatic aberration inside the cap is not lower than Level 3-4.
3.4.2 There are no obvious oil stains, demolition marks, defects and gross leaks in the various
parts.
3.4.3 The elastic steel bar is moderately tight, and the bow is straight. The use of steel bars and
metal parts must have anti-rust measures, so as not to contaminate the products.
3.4.4 The stitch density shall comply with the stipulations of Table 2.
3.4.5 Seams are neat and secure.
3.4.6 The stitching shall be suitable for the performance, color and luster of the fabric (except
decorative thread).
3.4.7 All parts are sewn flat, with straight threads, no open thread, loose thread or continuous
skipped stitches. The threads are evenly received, and there are no more than two needles or
two missing spots in the same part.
3.4.8 There is no obvious head tilt or concave waist at the mouth of the cap. The cusps are
upright, the stitches are smooth, and there is no obvious tip or apex.
3.4.9 The top yarn is facing straight, without obvious skew. The hemming is solid, and the width
of the cap hoop is basically the same. The pull loops, pinch pleats, pull pleats and shirring are
even, and the yarn is facing straight.
3.4.10 The part with sewing tendency is uniform and reasonable.
3.4.11 The eaves are straight, the seams of the two walls are aligned, and the difference between
the cornice angles does not exceed 0.5 cm.
3.4.12 The top of the cap is flat and round: take 1/4 to measure the height of the arc and the
symmetrical part, and the difference between them does not exceed 0.4 cm; the difference
between artificial wool and woolen materials does not exceed 0.8 cm.
3.4.13 The inlaid buds and inlaid strips are moderately tight, flat and the width is basically the
same.
3.4.14 The run & fell and sweat seam are smooth, and without obvious folds or locks. The edges
of the eaves do not exceed 0.8 cm, and there is no double track tread on the lap.
4.4 Determination of Physical and Chemical Properties
4.4.1 The color fastness to washing with soap shall be tested in accordance with the stipulations
of Method A (1) in GB/T 3921-2008.
4.4.2 The color fastness to light shall be tested in accordance with the stipulations of GB/T
8427-2008, in which, the exposure to the sun is carried out in accordance with Method 3 and
proceeded until the first stage.
4.4.3 The tensile strength of non-detachable accessories shall be tested in accordance with the
stipulations of GB/T 33271.
4.4.4 For the appearance quality test method after washing, after washing and drying, assess it
under the conditions of appearance inspection. The washing procedure shall be tested in
accordance with the stipulations of GB/T 8630; the washing method shall comply with
procedure 7A (labeled hand-washing products shall adopt imitated hand washing) in GB/T
8629-2001; adopt hanging-to-dry as the drying method. The dry cleaning procedure shall be
tested in accordance with the stipulations of FZ/T 80007.3, and the conventional dry cleaning
method shall be adopted.
4.4.5 The other physical and chemical properties shall be tested in accordance with the
stipulations of GB/T 21294.
4.4.6 For test items that do not mention the sampling location, samples can be taken on finished
products in accordance with the test demands.
5 Inspection Rules
5.1 Inspection Classification
5.1.1 Finished product inspection is divided into exit-factory inspection and type inspection.
The timing of type inspection is based on the actual situation of the manufacturer or the
stipulations of the contract agreement. It is generally carried out when the production is
transferred or resumed after suspension, or when there are major changes in raw materials or
processes.
5.1.2 The exit-factory inspection items shall comply with the stipulations of Chapter 3, except
3.5. The exit-factory inspection rules for finished products shall comply with the stipulations
of FZ/T 80004.
5.1.3 The type inspection items shall comply with the stipulations of Chapter 3.
5.2 Appearance Quality and Defect Classification Rules
5.2.1 Classification of appearance quality
The classification of appearance quality of finished products is based on the existence and
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
PDF Preview: FZ/T 82002-2016
|