CQC-C1104-2014 PDF English
US$170.00 · In stock · Download in 9 secondsCQC-C1104-2014: China Compulsory Certification Implementation Detailed-Rules - Motor vehicle safety-belts Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| CQC-C1104-2014 | English | 170 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
China Compulsory Certification Implementation Detailed-Rules - Motor vehicle safety-belts
| |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: CQC-C1104-2014
CQC-C1104-2014: China Compulsory Certification Implementation Detailed-Rules - Motor vehicle safety-belts
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/CQC-C1104-2014
Serial No.. CQC-C1104.2014
China Compulsory Certification
Implementation Detailed-Rules
Safety-Belt of Motor Vehicle
Issued on: DECEMBER 31, 2014
Implemented on: JANUARY 1, 2015
China Quality Certification Center
Foreword
This Implementation Detailed-Rules is formulated on the basis of “Implementing Rules for
China Compulsory Certification - Safety-Belt of Motor Vehicle” (CNCA-C11-04.2014). It is
issued by the China Quality Certification Center. The copyright belongs to the China
Quality Certification Center. Any organization or individual shall not use it in whole or in
part in any form without permission of the China Quality Certification Center.
Formulating organization. China Quality Certification Center
Table of Contents
0.Introduction... 5
0.1 Terms and definitions... 5
0.2 Classification Management Requirements of Manufacturing Enterprises... 5
0.3 Requirements on Utilizing Testing Resources of Manufacturing Enterprises
... 7
1.Application scope... 8
2.Certification standards... 8
3.Certification mode... 9
3.1 Basic Certification Mode... 9
3.2 Applicability of Certification Mode... 9
4.Division of Certification Units... 9
5.Certification entrusting... 10
5.1 Proposal and Acceptance of Certification Application... 10
5.2 Application Materials... 10
5.3 Implementation Arrangement... 11
6.Implementation of Certification... 12
6.1 Type Test... 12
6.2 Initial Factory Inspection... 14
6.3 Certification Evaluation and Determination... 16
6.4 Certification Time-limit... 16
6.5 Service-parts of discontinued vehicle model... 16
7.After-Certification Supervision... 16
7.1 After-certification follow-up inspection... 17
7.2 Sampling Test or Inspection at the Production On-site... 18
7.3 Market Sampling Test or Inspection... 18
7.4 Frequency and Time of After-Certification Supervision... 19
7.5 Record of After-Certification Supervision... 19
7.6 Evaluation of Supervision Result after getting the certificate... 19
8.Certificate... 20
8.1 Maintenance of the certificate... 20
8.2 Content of the Certificate... 20
8.3 Change of the Certificate... 20
8.4 Cancellation, Suspension and Withdrawal of the Certificate... 21
8.5 Use of the Certificate... 22
9.Certification Mark... 22
9.1 Mark style permitted to use... 22
9.2 Use Requirements... 22
10.Charge... 22
11.Certification Responsibility... 23
12.Procedures and Time-limit Related to Technical Disputes, Complaints and
Appeals... 23
Attachment I Requirements of Production Conformity Control Plan... 24
Attachment II Certification implementation of service parts for after-sales
maintenance for discontinued vehicle model... 27
0.Introduction
“China Compulsory Certification Implementing Detailed-Rules - Safety-Belt of Motor
Vehicle” (hereinafter referred to as Detailed-Rules) is compiled based on the requirements
of “Implementation Rules for China Compulsory Certification - Safety-Belt of Motor
Vehicle” (CNCA-C11-04.2014) (hereinafter referred to as Implementation-Rules). This
Detailed-Rules is used together with the Implementation-Rules as supportive document.
The product scope, certification basis and all other contents of this Detailed-Rules shall
comply with relevant provisions of Implementation Rules. It shall also be adjusted
according to the Notices such as defined directory and directory adjustment that are issued
by Certification and Accreditation Administration of China (hereafter referred to as CNCA).
In accordance with the provisions of Implementation Rules, following the principles of
maintaining the effectiveness of product certification, improving quality of product, serving
certification companies, and controlling risk of certification, CQC formulates and issues this
Detailed-Rules. Through establishing the classification management requirements of
manufacturing enterprises, and combining the classification of manufacturing enterprises,
this Detailed-Rules determines the implementation requirements for China Compulsory
Certification of Door locks and door retention components for motor vehicles” (hereinafter
referred to as Door-locks).
0.1 Terms and definitions
0.0.1 Testing at Manufacturer’s Premises (abbreviated as TMP mode)
It means that the engineers of designated laboratory use the testing equipment in the
factory laboratory to conduct testing. The factory shall dispatch test personnel to provide
assistance. The designated laboratory will examine, approve and issue the test report.
0.1.2 Witnessed Manufacturer’s Testing (abbreviated as WMT mode)
It means that the engineer of designated laboratory witnesses the factory laboratory’s test
conditions and all tests completed by using the laboratory’s equipment or according to the
test plan submitted; or witnesses part of the test conditions and the test items. Test
personnel of the factory laboratory shall provide the original records and draft up the test
report together with the engineer of designated laboratory according to relevant provisions.
The designated laboratory shall audit, approve and issue the test report.
0.2 Classification Management Requirements of Manufacturing Enterprises
CQC collects and sorts-out all the information related to certification products and quality
related to manufacturing enterprises; and uses dynamic classification management for
manufacturing enterprises. certification entrusting client [hereafter abbreviated as CLIENT],
manufacturer and manufacturing enterprise shall make cooperation with it.
CQC classifies the manufacturing enterprises into 4 categories - A, B, C and D.
Quality information that is based to classify the manufacturing enterprises shall at least
include the following aspects.
(1) results of factory inspection (including the initial factory inspection and
after-certification follow-up inspection);
(2) results of sample test and / or supervision sampling test (including type test,
production on-site sampling or market sampling, etc.);
(3) inspection results of national-level or provincial-level sampling, CCC special
sampling, etc.;
(4) the cooperation conditions of CLIENT, producers (manufacturers) and
manufacturing enterprises for after-certification supervision;
(5) judicial decision, arbitration of complaint and appeal, media exposure, quality
information feedback of consumers, etc.;
(6) quality conditions of the certified products;...
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of CQC-C1104-2014 be delivered?Answer: The full copy PDF of English version of CQC-C1104-2014 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of CQC-C1104-2014_English with my colleagues?Answer: Yes. The purchased PDF of CQC-C1104-2014_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- CQC-C1104-2014 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of CQC-C1104-2014?A step-by-step guide to download PDF of CQC-C1104-2014_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "CQC-C1104-2014".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|