CNCA C11-20-2020 PDF English
US$395.00 · In stock · Download in 9 secondsCNCA C11-20-2020: Compulsory product certification implementation rules - Automobile brake lining Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| CNCA C11-20-2020 | English | 395 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Compulsory product certification implementation rules - Automobile brake lining
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: CNCA C11-20-2020
CNCA C11-20-2: ---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/CNCAC11-20-2
CNCA / CCC
Serial No.. CNCA-C11-20.2020
Compulsory product certification implementation rules -
Automobile brake lining
Issued on. MAY 29, 2020
Implemented on. JUNE 01, 2020
Issued by. Certification and Accreditation Administration of the People's
Republic of China
Table of Contents
0 Introduction... 4
1 Application scope... 4
2 Certification standards... 4
3 Certification modes... 5
4 Division of certification units... 5
5 Certification entrusting... 6
6 Certification implementation... 7
7 After-certification supervision... 10
8 Certificate... 12
9 Certification marks... 13
10 Charges... 13
11 Certification responsibility... 14
12 Certification implementation detailed-rules... 14
Attachment 1.Product description of automobile brake lining... 15
Attachment 2.Production conformity requirements... 17
1 Application scope
This Rules applies to automobile brake lining (hereinafter referred to as lining).
Due to the changes in the law, regulations or related product standards, technology,
industry policies and other causes which may change the applicable scope, the
announcement released by CNCA shall be final and conclusive.
2 Certification standards
Basis standard GB 5763 “Brake linings for automobiles”
The latest version of the basis standard that is issued by the National Standardization
Administration shall be executed. When it is necessary to add applicable standards or
use other versions of the standard, it shall be implemented in accordance with the
relevant announcements required by the applicable standards issued by the CNCA.
3 Certification modes
The basic certification mode of implementing the compulsory certification for
automobile brake lining products is.
5 Certification entrusting
5.1 Application and acceptance of certification entrusting
CLIENT must put forward the certification entrusting to the certification body, in an
appropriate way. Certification body shall process the certification entrusting; and
feedback the acceptance or rejection according to the time limit in the certification
implementation detailed-rules.
5.2 Application materials
The certification body shall, in accordance with the laws and regulations, standards,
and the needs of certification implementation, specify the certification entrusting
materials in the certification implementation detailed-rules.
5.3 Implementation arrangement
The certification body shall agree with CLIENT on the relevant responsibility
arrangement of both parties in each link of certification implementation.
6 Certification implementation
6.1 Type test
6.1.1 Type test plan
Certification body shall formulate the type test plan, after auditing the materials. And
INFORM the CLIENT. The CLIENT can choose the designated laboratory by itself.
The type test plan includes the requirements and quantity of all samples for the type
test, test standard items, laboratory information, etc.
6.1.3 Items of type test
Type test items are mandatory clauses applicable to the corresponding standards in
Clause 2 of this Rules.
6.1.5 Type test report
Certification body shall specify a unified form of the type test report.
After the type test is completed, the laboratory shall promptly issue a type test report
to the CLIENT and certification body. CLIENT shall ensure that, it is able to provide
the complete and valid type test report to certification body and laws enforcement
authorities during the after-certification supervision.
6.2 Initial factory inspection
The initial factory inspection is the certification body's evaluation of whether the
factory's production conformity control system can meet the certification requirements.
It is carried out according to the production conformity control plan review +
production conformity factory on-site inspection.
6.2.1 Basic principles
The factory shall, in accordance with the requirements of Attachment 2 of this Rules,
establish, implement, and continuously maintain its production conformity control
system, to ensure that the certified products continue to meet the certification
requirements.
6.2.2 Production conformity control plan review
The factory shall formulate a production conformity control plan in accordance with
the requirements of Attachment 2 and submit it to the certification body for review. The
certification body shall inform the factory of the audit results.
6.2.3 Production conformity factory on-site inspection
Under normal circumstances, after passing the type test and the production
conformity control plan review, the production conformity factory on-site inspection
shall be carried out.
7 After‐certification supervision
After-certification supervision refers to the supervision carried out by the certification
body on the certified product and its manufacturing enterprise, including the random
combination of after-certification follow-up inspection of all certified products and
processing sites, factory on-site sampling test, and market sampling test methods.
7.1 After-certification follow-up inspection
7.1.1 Principles of after-certification follow-up inspection
Based on manufacturing enterprise classification management, certification body
shall implement the effective follow-up inspection to the certified product and its
manufacturing enterprise, so as to validate that the quality assurance capability of the
manufacturing enterprise can continuously comply with the certification requirements;
7.1.2 Content of after-certification follow-up inspection
The certification body shall, under the principle of ensuring that the certification risk is
controllable, in accordance with Attachment 2, formulate the specific content of the
requirements of after-certification follow-up inspection; and, make it clear in the
certification implementation detailed-rules.
7.2 Factory on-site sampling test
8.1 Maintenance of the certificate
This Rules covers the 5-year validity period of product certificate. Within the validity
period, the validity of the certificate is maintained by depending on the
“after-certification supervision” of the certification body.
8.2 Content of the certificate
If the content of the certificate is marked on the certified product and its sales package,
it shall be consistent with the content of the certificate.
8.4 Certificate’s cancellation, suspension and withdrawal
The suspension, cancellation and withdrawal of certificates shall be implemented in
accordance with "China Compulsory Certification Management Regulations" (No. 117
Decree by General Administration of Quality Supervision, Inspection and Quarantine),
"Compulsory product certificate cancellation, suspension and withdrawal
implementation rules", and relevant regulations of the certification body.
8.5 Use of the certificate
Use of the certificate shall comply with the requirements of "China Compulsory
Certification Management Regulations".
9 Certification marks
The management and use of certification marks shall comply with the provisions of
"Announcement of the CNCA on the Reform of Compulsory Product Certification
Marks".
CNCA-C11-20.2020
CNCA / CCC
Serial No.. CNCA-C11-20.2020
Compulsory product certification implementation rules -
Automobile brake lining
Issued on. MAY 29, 2020
Implemented on. JUNE 01, 2020
Issued by. Certification and Accreditation Administration of the People's
Republic of China
Table of Contents
0 Introduction... 4
1 Application scope... 4
2 Certification standards... 4
3 Certification modes... 5
4 Division of certification units... 5
5 Certification entrusting... 6
6 Certification implementation... 7
7 After-certification supervision... 10
8 Certificate... 12
9 Certification marks... 13
10 Charges... 13
11 Certification responsibility... 14
12 Certification implementation detailed-rules... 14
Attachment 1.Product description of automobile brake lining... 15
Attachment 2.Production conformity requirements... 17
1 Application scope
This Rules applies to automobile brake lining (hereinafter referred to as lining).
Due to the changes in the law, regulations or related product standards, technology,
industry policies and other causes which may change the applicable scope, the
announcement released by CNCA shall be final and conclusive.
2 Certification standards
Basis standard GB 5763 “Brake linings for automobiles”
The latest version of the basis standard that is issued by the National Standardization
Administration shall be executed. When it is necessary to add applicable standards or
use other versions of the standard, it shall be implemented in accordance with the
relevant announcements required by the applicable standards issued by the CNCA.
3 Certification modes
The basic certification mode of implementing the compulsory certification for
automobile brake lining products is.
5 Certification entrusting
5.1 Application and acceptance of certification entrusting
CLIENT must put forward the certification entrusting to the certification body, in an
appropriate way. Certification body shall process the certification entrusting; and
feedback the acceptance or rejection according to the time limit in the certification
implementation detailed-rules.
5.2 Application materials
The certification body shall, in accordance with the laws and regulations, standards,
and the needs of certification implementation, specify the certification entrusting
materials in the certification implementation detailed-rules.
5.3 Implementation arrangement
The certification body shall agree with CLIENT on the relevant responsibility
arrangement of both parties in each link of certification implementation.
6 Certification implementation
6.1 Type test
6.1.1 Type test plan
Certification body shall formulate the type test plan, after auditing the materials. And
INFORM the CLIENT. The CLIENT can choose the designated laboratory by itself.
The type test plan includes the requirements and quantity of all samples for the type
test, test standard items, laboratory information, etc.
6.1.3 Items of type test
Type test items are mandatory clauses applicable to the corresponding standards in
Clause 2 of this Rules.
6.1.5 Type test report
Certification body shall specify a unified form of the type test report.
After the type test is completed, the laboratory shall promptly issue a type test report
to the CLIENT and certification body. CLIENT shall ensure that, it is able to provide
the complete and valid type test report to certification body and laws enforcement
authorities during the after-certification supervision.
6.2 Initial factory inspection
The initial factory inspection is the certification body's evaluation of whether the
factory's production conformity control system can meet the certification requirements.
It is carried out according to the production conformity control plan review +
production conformity factory on-site inspection.
6.2.1 Basic principles
The factory shall, in accordance with the requirements of Attachment 2 of this Rules,
establish, implement, and continuously maintain its production conformity control
system, to ensure that the certified products continue to meet the certification
requirements.
6.2.2 Production conformity control plan review
The factory shall formulate a production conformity control plan in accordance with
the requirements of Attachment 2 and submit it to the certification body for review. The
certification body shall inform the factory of the audit results.
6.2.3 Production conformity factory on-site inspection
Under normal circumstances, after passing the type test and the production
conformity control plan review, the production conformity factory on-site inspection
shall be carried out.
7 After‐certification supervision
After-certification supervision refers to the supervision carried out by the certification
body on the certified product and its manufacturing enterprise, including the random
combination of after-certification follow-up inspection of all certified products and
processing sites, factory on-site sampling test, and market sampling test methods.
7.1 After-certification follow-up inspection
7.1.1 Principles of after-certification follow-up inspection
Based on manufacturing enterprise classification management, certification body
shall implement the effective follow-up inspection to the certified product and its
manufacturing enterprise, so as to validate that the quality assurance capability of the
manufacturing enterprise can continuously comply with the certification requirements;
7.1.2 Content of after-certification follow-up inspection
The certification body shall, under the principle of ensuring that the certification risk is
controllable, in accordance with Attachment 2, formulate the specific content of the
requirements of after-certification follow-up inspection; and, make it clear in the
certification implementation detailed-rules.
7.2 Factory on-site sampling test
8.1 Maintenance of the certificate
This Rules covers the 5-year validity period of product certificate. Within the validity
period, the validity of the certificate is maintained by depending on the
“after-certification supervision” of the certification body.
8.2 Content of the certificate
If the content of the certificate is marked on the certified product and its sales package,
it shall be consistent with the content of the certificate.
8.4 Certificate’s cancellation, suspension and withdrawal
The suspension, cancellation and withdrawal of certificates shall be implemented in
accordance with "China Compulsory Certification Management Regulations" (No. 117
Decree by General Administration of Quality Supervision, Inspection and Quarantine),
"Compulsory product certificate cancellation, suspension and withdrawal
implementation rules", and relevant regulations of the certification body.
8.5 Use of the certificate
Use of the certificate shall comply with the requirements of "China Compulsory
Certification Management Regulations".
9 Certification marks
The management and use of certification marks shall comply with the provisions of
"Announcement of the CNCA on the Reform of Compulsory Product Certification
Marks".
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of CNCA C11-20-2020 be delivered?Answer: The full copy PDF of English version of CNCA C11-20-2020 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of CNCA C11-20-2020_English with my colleagues?Answer: Yes. The purchased PDF of CNCA C11-20-2020_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- CNCA C11-20-2020 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of CNCA C11-20-2020?A step-by-step guide to download PDF of CNCA C11-20-2020_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "CNCA C11-20-2020".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|