HOME   Cart(0)   Quotation   About-Us Tax PDFs Standard-List Powered by Google www.ChineseStandard.net Database: 189759 (2 Feb 2025)

CNCA C11-10-2014 PDF English


Search result: CNCA C11-10-2014 English: PDF
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
CNCA C11-10-2014English220 Add to Cart 0-9 seconds. Auto-delivery. China Compulsory Certification Implementation Rules - Vehicle door locks and door holder
BUY with any currencies (Euro, JPY, GBP, KRW etc.): CNCA C11-10-2014     Related standards: CNCA C11-10-2014

PDF Preview: CNCA C11-10-2014


CNCA C11-10-2014: PDF in English

CNCA-C11-10.2014 CNCA / CCC Serial No.. CNCA-C11-10.2014 CNCA-C11-10-2014 China Compulsory Certification Implementation Rules - Door locks and door retention components for motor vehicles Issued on. August 21, 2014      Effective on. January 1, 2015  Issued by. Certification and Accreditation Administration of the People’s Republic of China (CNCA) He is now the Sales Manager (Founder and Managing Director) at expertise and hands-on working experiences, through his then-employment as “China Certification Program Manager” at BlackBerry Beijing, and “Product Safety & Compliance (PS&C) Manager” at Motorola Singapore. - CNCA / China Compulsory Certification (CCC) regulations. - Hands-on program experience with regulator CNCA for CCC mark’s compliance, approval and management. - Was an authorized representative by then-employer BlackBerry (RIM) to liaise with Chinese regulators, authorities, certification bodies and designated laboratories – including CNCA, CQC, Beijing Communication Authority, Beijing Administration of Quality Supervision Inspection and Quarantine. - Hands-on program experience with certification body CQC for “certification entrusting”, type test, initial factory audit, regular / annual factory audit (i.e. the “after-certification supervision” in this Rules). - Manage, plan, guide and site-visit the global factories / suppliers’ global factories (i.e. the “manufacturing enterprises” in this Rules) in North America, Europe and China for CQC initial factory audit and regular annual factory audit (after-certification supervision). - ISO Process Auditor, certified by Motorola USA & Motorola Singapore - PMP, certified by Project Management Institute USA. to deliver. Automatic and immediate delivery (0 ~ 25 munites). Table of Contents 0 Introduction ... 4  1 Application scope ... 4  2 Standards for certification ... 4  3 Certification modes ... 4  4 Classification of certification units ... 5  5 Certification entrusting ... 6  6 Certification implementation ... 6  7 After-certification supervision ... 9  8 Certificate ... 11  9 Certification marks ... 13  10 Charges ... 13  11 Certification responsibility ... 14  12 Certification implementation detailed-rules ... 14  Attachment 1. Product description of door-lock ... 15  Attachment 2. Production conformity requirements ... 17  Appendix 1. Factory quality assurance capability requirements ... 19  Attachment 3. Certification implementation of service parts for the after-sales maintenance for vehicles out of production ... 25  0  Introduction  This Rules is established based on the security risk and certification risk of door locks and door retention components for motor vehicles [Translator. hereafter abbreviated as door-lock]. It stipulates the basic principles and requirements for the implementation of China Compulsory Certification for door-locks. This Rules can be used with other general rules issued by Certification and Accreditation Administration (CNCA), such as “China Compulsory Certification Implementation Rules - Manufacturing Enterprise Classification Management, Certification Mode Selection and Determination”, “China Compulsory Certification Implementation Rules – Utilization of Manufacturing Enterprise Testing Resource and Other Certification Results”, “China Compulsory Certification Implementation Rules - Factory Inspection General Requirements”. The certification body shall make principles for certification according to the general implementation rules and this Rules and implement them accordingly. Manufacturing enterprise shall ensure that their certified products are capable of sustaining the compliance with the certification and are compatible with the requirements of the standards. 1  Application scope  This Rules applies to. (1) Door-locks of side-doors (including sliding doors) or rear doors in M1- category and N1-category vehicles; (2) Door hinges of side doors or rear doors in M1-category and N1-category vehicles, excluding sliding rails and other supporting parts. Due to the changes in the laws, regulations or related product standards, technology, industry policies and other causes which may change the applicable scope, the announcement released by CNCA shall be final and conclusive. 2  Standards for certification  GB 15086 Motor vehicles - Door locks and door retention components - Performance requirements and test methods In principle, the latest versions of above standards that are issued by the National Standardization Administration shall be executed. When other versions are required to use, then it shall be executed according to the applicable relevant standards issued by the State Certification and Accreditation Administration (CNCA). 3  Certification modes  The basic certification mode of implementing the China Compulsory Certification for door-lock is. Type test + initial factory inspection + after-certification supervision; “After-certification supervision” in above basic certification mode refers to 1 of the 3 modes – after certification, follow-up inspection and factory on-site sampling testing OR inspection and sampling testing in the market OR inspection. The certification body shall follow the requirements of “China Compulsory Certification Implementation Rules - Manufacturing Enterprise Classification Management, Certification Mode Selection and Determination” to carry out the classification management to manufacturing enterprise; consider the results of classification management; on the basis of basic certification mode, appropriately increase the combination of supervision mode after certification, so as to determine the certification mode that is applicable to certification client [TRNASLATOR NOTE is not part of this Rules. Translator note. “certification client”, the counterpart of certification body, refers to the Applicant / Manufacturer or its proxy (Power of Attorney). For ease of reading, hereinafter abbreviated as “CLIENT”]. 4  Classification of certification units  In principle, the products of the same-function, produced by the same-producer (manufacturer) and same-manufacturing enterprise (location), and having no significant difference in the following aspects could be classified as one certification unit. 4.1 Locks (1) Structure type of lock-body and lock-buckle (or block); (2) Materials of main components; (3) Connection method with the vehicles. 4.2 Hinges (1) Structure type of hinges and materials of main components; (2) The difference of hinge-pin (length and diameter) is within 20%. In principle, CLIENT shall put forward the certification entrusting based on the principle of unit classification. It may include multiple “models (or specifications)” products in a same-unit. Same-model refers to those products of which the design has no impact to standard compliance. For the same-product that is of same-manufacturer but of different manufacturing enterprises, or for the same-model product that is of different manufacturers and of same-manufacturing enterprise, it may consider to only conduct the type test on the samples of 1 unit. The products of other carry out the “final assembly”, Certification Body may likely need to inspect/audit the critical components / sub-assembly supplier]. The factory on-site inspection time shall be made according to the unit quantity of the products, and appropriately consider the production scale of the factory. Normally it needs 1-2 man-days for each factory. When conducting factory on-site inspection, inspection team shall choose samples randomly from the end of the production line or qualified product in the warehouse. Randomly sampled products are inspected, but not limited to, for the following contents. a. The structure and parameters of the products to be certified; b. Designated test in factory on-site (selected from production conformity control plan). If no un-conformance product is found, the inspection result is qualified; If un-conformance products are found, factory is allowed to make rectifications. Certification body adopts appropriate way to confirm the rectification results. The rectification time must not be more than 3 months. If the rectification cannot be finished on time, or the rectification results are not conformant, the inspection result is unqualified. If there is sig... ......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.