Powered by Google www.ChineseStandard.net Database: 189759 (19 May 2024)

CNCA 00C-002-2009 PDF in English


CNCA 00C-002-2009 (CNCA00C-002-2009) PDF English
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
CNCA 00C-002-2009English180 Add to Cart 0-9 seconds. Auto-delivery. Compulsory Product Certification Implementation Rules Related to the Supplementary Provisions of the ODM Model


Standards related to: CNCA 00C-002-2009

CNCA 00C-002-2009: PDF in English

CNCA 00C-002-2009
Serial No.: CNCA-00C-002
CNCA-00C-002
Compulsory Product Certification Implementation
Rules Related to the Supplementary Provisions of the
ODM Model
Table of Contents
1. Object ... 4 
2. Scope of application and definitions ... 4 
3. Responsibility ... 4 
4. ODM model certification application and acceptance ... 4 
5. Change of ODM certification certificate ... 5 
6. Certification management requirements for ODM factory ... 5 
7. Certification management requirements for ODM manufacturer/certificate holder ... 6 
8. Suspension, restoration, withdrawal and cancellation of certification certificates ... 6 
9. On-site inspection of ODM certification model ... 7 
10. Certificate requirements ... 8 
11. Other matters ... 8 
1. Object
In order to standardize and clarify the relevant matters and requirements in development
of certification activities for the ODM model of China Compulsory Certification (hereinafter
referred to as CCC certification); strengthen the control of the implementation process and
results of ODM model compulsory product certification; and ensure the effectiveness of
compulsory product certification; this Provisions is developed.
2. Scope of application and definitions
This Provisions applies to the implementation and management of ODM model compulsory
product certification (excluding security and fire protection products). The related
definitions of ODM model are as follows:
ODM factory: A factory which designs, processes, and produces the same products for
one or more manufacturers by using the same quality assurance capability
requirements, the same product design, production process control and inspection
requirements, etc.
ODM initial certification certificate holder: An organization which holds the initial CCC
certification certificate of ODM product.
ODM model: A commissioned manufacturing model where the ODM factory, in
accordance with the documents such as relevant agreements with the manufacturer,
designs, processes, and produces products for the manufacturer.
3. Responsibility
In accordance with this Provisions, the designated certification bodies for compulsory
product certification (hereinafter referred to as designated certification bodies) are
specifically responsible for the certification acceptance of ODM model CCC certification
process, initial factory inspection, certification result evaluation and approval, and after-
certification supervision, etc.
The certification client/related party shall perform the certification-related responsibilities
and obligations required by this Provisions.
4. ODM model certification application and acceptance
4.1 To apply for CCC certification certificate in ODM model, the following materials shall
be submitted:
8.2 When the certification certificate of an ODM factory or any ODM manufacturer is
suspended or withdrawn due to disqualified ODM products or factory inspection, the
designated certification body shall suspend or withdraw all relevant ODM certification
certificates at the same time; and, notify the certification certificate holders.
8.3 When an ODM manufacturer fails to meet the after-certification annual supervision and
inspection requirements, because it has not entrusted the ODM factory to produce certified
products in batches for 12 consecutive months, the designated certification body shall
suspend the product certification certificate marked with the ODM manufacturer; and, notify
the certification certificate holder.
8.4 When the ODM initial certification certificate is suspended/cancelled/withdrawn due to
other reasons (disqualified non-product testing or factory inspection), the designated
certification body shall suspend/cancel/withdraw all related ODM certification certificates
at the same time; and, notify the certification certificate holders.
8.5 When the ODM initial certification certificate related to the certified product is changed,
and other ODM certification certificate holders fail to apply for the certification change and
obtain approval in accordance with the requirements of clause 5.2, the designated
certification body shall suspend the relevant ODM certification certificates; and, notify the
certification certificate holders.
8.6 The application for restoration of the ODM certification certificate, which is suspended
due to disqualified product or factory inspection, must be submitted by the holder of the
ODM initial certification certificate. Only after the designated certification body approves
the restoration of the ODM initial certification certificate in accordance with relevant
procedures, can other ODM certification certificate holders submit a certificate restoration
application.
9. On-site inspection of ODM certification model
9.1 When necessary, the designated certification body may conduct on-site inspection and
supervisory inspection of ODM manufacturer. The number of person-days for verification
shall not exceed 0.5 person-days.
9.2 When the designated certification body supervises and inspects the ODM factory, it
shall check the production quality control and related records of all relevant ODM products;
issue a verification report of each ODM manufacturer. During the supervisory inspection of
ODM factories, according to the number of ODM manufacturers, the number of inspection
person-days may be appropriately increased. It shall not exceed 0.25 person-days for each
manufacturer. The total increase shall not exceed 1 person-day.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.