|
Std ID |
Description (Standard Title) |
|
NB/T 42042-2014
|
Intermediate strength aluminium alloy wire for overhead line conductors
|
|
NB/T 42018-2013
|
Copper-clad aluminium alloy wires for shield
|
|
NB/T 42002-2012
|
Copper-clad aluminum bus bars for electrical purposes
|
|
NB/T 10687-2021
|
(Specification for selection and inspection of high-voltage direct current equipment for plateaus with high seismic intensity)
|
|
NB/T 10688-2021
|
Technical specifications of sealing articles for high voltage DC equipment for plateau
|
|
NB/T 10291-2019
|
(Test method for equivalent accelerated life of daily-use tubular electric heating elements for heating air)
|
|
NB/T 10307-2019
|
(Defrost heater for refrigerator)
|
|
NB/T 10309-2019
|
(Anticorrosive metal tubular heating element)
|
|
NB/T 10310-2019
|
Electric heating strip (wire) of auxiliary heating for compressor
|
|
NB/T 11146-2023
|
Technical specification for online comparison of power quality monitoring device
|
|
NB/T 11316-2023
|
Technical specification for field testing of power quality in substation
|
|
NB/T 10942-2022
|
General technical requirements of active voltage sag curing device up to 10 kV
|
|
NB/T 10943-2022
|
Testing rules of active voltage sag curing device up to 10 kV
|
|
NB/T 10613-2021
|
Technical specification of power quality measurement and evaluation for electric vehicle battery charging/swap station
|
|
NB/T 10614-2021
|
(General requirements for coordinated control of parallel operation of dynamic reactive power compensation devices)
|
|
NB/T 20040-2021
|
Testing rules of active voltage sag curing device up to 10 kV
|
|
NB/T 10197-2019
|
General technical specification of high-altitude field mobile impulse voltage generator
|
|
NB/T 10308-2019
|
(Infrared temperature field distribution test method for electric heating element)
|
|
NB/T 41010-2018
|
Power supply technical guidelines for AC electric arc furnace - Power quality control
|
|
NB/T 42155-2018
|
Minimum safety distance of 40.5kV AC metal-enclosed switchgear used for high altitude areas
|
|
NB/T 41007-2017
|
Power supply technical guidelines for AC electric arc furnace. Design of power supply
|
|
NB/T 41008-2017
|
Power supply technical guidelines for AC electric arc furnace. Power quality assessment
|
|
NB/T 41009-2017
|
Technical guide for custom power technology
|
|
NB/T 42131-2017
|
Environmental testing requirements for photovoltaic modules. General principles
|
|
NB/T 42136-2017
|
Metal structural components of power facilities. Technical requirements of anticorrosion coatings in hot and humid environment
|
|
NB/T 41004-2014
|
Power quality phenomenon classification
|
|
NB/T 41005-2014
|
General technical requirement of power quality control devices
|
|
NB/T 41006-2014
|
Low-voltage active integrative var compensator
|
|
NB/T 42119.1-2017
|
(Smart Grid Client - Side Energy Management Systems - Part 1: Technical Guidelines)
|
|
NB/T 42119.2-2017
|
Customer energy management system of smart grid -- Part 2: Technical specification of master station
|
|
NB/T 11746-2024
|
(Quality and safety technical requirements of organic silicon heat carrier)
|
|
NB/T 11477-2023
|
(Specification for reliability assessment of power station boilers)
|
|
NB/T 47033-2023
|
(Temperature and pressure reduction device)
|
|
NB/T 10669-2021
|
Guide for design of pulverized coal boiler in high sodium coal power station
|
|
NB/T 10790-2021
|
Water-treatment equipment technology conditions
|
|
NB/T 47034-2021
|
(Technical conditions of industrial boilers)
|
|
NB/T 47037-2021
|
(Compilation method of power station valve model)
|
|
NB/T 47038-2019
|
(Constant force spring support hanger)
|
|
NB/T 47066-2018
|
Thermal performance test method for condensing boiler
|
|
NB/T 10127-2018
|
Performance design standard for furnaces and burners of large-capacity pulverized-coal-fired boilers
|
|
NB/T 47055-2017
|
(General technical conditions for boiler coating and packaging)
|
|
NB/T 47056-2017
|
Methods of testing microstructure and fracture for welding points of boiler pressure parts
|
|
NB/T 42116-2017
|
Determination of aluminium, calcium, iron, magnesium, phosphorus, potassium, silicon, sodium, titanium in solid biofuels for biomass boiler
|
|
NB/T 42117-2017
|
Technical specification for the biomass boilers using water cooled vibrating grate
|
|
NB/T 42118-2017
|
Technical specification for biomass chain and travelling grate stoker boiler
|
|
NB/T 47060-2017
|
The rotary air preheater
|
|
NB/T 47061-2017
|
Energy efficiency index and grading of industrial boiler system
|
|
NB/T 47062-2017
|
Biomass molded fuel fired boilers
|
|
NB/T 47063-2017
|
Safety valves for power station
|
|
NB/T 47049-2016
|
Technical specificaition for the manufacture of tubular air preheaters
|
|
NB/T 47050-2016
|
Technical specification for reciprocating grate
|
|
NB/T 47051-2016
|
Technical specification for industrial boiler control devices
|
|
NB/T 42045-2015
|
Specification of steel Chimney of waste heat boiler
|
|
NB/T 42046-2015
|
Diverter damper technical specification
|
|
NB/T 42047-2015
|
Specification for waste heat boilers of coke dry quenching
|
|
NB/T 42048-2015
|
Specification of sintering heat recovery boiler
|
|
NB/T 42030-2014
|
Technical specification for biomass circulating fluidized bed boiler
|
|
NB/T 42031-2014
|
Technical conditions for biomass boiler screw feeding device
|
|
NB/T 47043-2014
|
Technical specification for manufacture of boiler steel structures
|
|
NB/T 34012-2013
|
Technical specification for the water cooled vibrating grate of biomass boiler
|
|
NB/T 47030-2013
|
Specification of high frequency resistance welded spiral in tubes for boiler
|
|
NB/T 47031-2013
|
Specification of headers and module for spiral fin tubes
|
|
NB/T 47032-2013
|
Specification of small radius bent-tube for heat recovery boiler
|
|
NB/T 47033-2013
|
Attemperating and pressure reducing devices
|
|
NB/T 47034-2013
|
Specification for industrial boilers
|
|
NB/T 47035-2013
|
Energy performance assessment for industrial boilers system
|
|
NB/T 47037-2013
|
Methods for model compositing of power station valves
|
|
NB/T 47038-2013
|
Constant spring support and hanger
|
|
NB/T 47039-2013
|
Variable spring hangers
|
|
NB/T 47040-2013
|
Man-hole and hand-hole of boiler set
|
|
NB/T 42001.1-2012
|
The norm of energy consumption per unit product of thermal power equipment manufacturing enterprises. Part 1: Utility boiler
|
|
NB/Z 42001.1-2012
|
The norm of energy consumption per unit product of thermal power equipment manufacturing enterprises Part 1: Utility boiler
|
|
NB/T 11486-2024
|
(Technical requirements for intelligent control system of denitrification and ammonia injection)
|
|
NB/T 10781-2021
|
(Air source heat pump sludge dryer)
|
|
NB/T 10500-2021
|
(QP type hoist series parameters)
|
|
NB/T 10502-2021
|
(QPPY I, II hydraulic hoist series parameters)
|
|
NB/T 11463-2023
|
Belt feeder
|
|
NB/T 35018-2022
|
(QPG type high-lift hoist series parameters)
|
|
NB/T 11148-2023
|
(Technical requirements for geothermal recharge filter device)
|
|
NB/T 11503-2024
|
(Photovoltaic direct-drive air source heat pump unit)
|
|
NB/T 11506-2024
|
(Heat recovery dehumidification and drying heat pump unit)
|
|
NB/T 11507-2024
|
(Air source heat pump system water pump selection and installation procedures)
|
|
NB/T 11235-2023
|
(Biomass clean air heater)
|
|
NB/T 11236-2023
|
(Air source carbon dioxide heat pump heating units for commercial or industrial use and similar purposes)
|
|
NB/T 11237-2023
|
(Low ambient temperature air source heat pump fan for farming)
|
|
NB/T 11239-2023
|
(Technical specifications for diversion heat collectors for low ambient temperature air source heat pumps)
|
|
NB/T 11026-2022
|
(Plate and shell heat exchanger)
|
|
NB/T 47004.2-2021
|
Plate heat exchangers - Part 2: Welded plate heat exchangers
|
|
NB/T 47019.1-2021
|
(Technical requirements for ordering boiler and heat exchanger tubes - Part 1: General rules)
|
|
NB/T 47019.2-2021
|
Purchase technical specification for boiler & heat exchanger tubes - Part 2: Non-alloy and alloy steel with room temperature properties
|
|
NB/T 47019.3-2021
|
Purchase technical specification for boiler & heat exchanger tubes/pipes - Part 3: Non-alloy and alloy steel with specified elevated temperature properties
|
|
NB/T 47019.4-2021
|
(Technical conditions for ordering boiler and heat exchanger tubes - Part 4: Low alloy steel for low temperature)
|
|
NB/T 47019.5-2021
|
(Technical requirements for ordering boiler and heat exchanger tubes - Part 5: Stainless steel)
|
|
NB/T 47019.6-2021
|
(Ordering specifications for boiler and heat exchanger tubes - Part 6: Austenitic-ferritic duplex stainless steel)
|
|
NB/T 47019.7-2021
|
(Technical requirements for ordering boiler and heat exchanger tubes - Part 7: Copper and copper alloys)
|
|
NB/T 47019.8-2021
|
(Technical conditions for ordering boiler and heat exchanger tubes - Part 8: Titanium and titanium alloys)
|
|
NB/T 47019.9-2021
|
(Technical conditions for ordering boilers and heat exchanger tubes - Part 9: Nickel and nickel alloys)
|
|
NB/T 47005-2021
|
(Plate evaporator)
|
|
NB/T 47006-2019
|
Aluminum plate-fin heat exchanger
|
|
NB/T 34069-2018
|
Impressed current cathodic protection device for enamel interior surface of water storage tank
|