|
Std ID |
Description (Standard Title) |
|
YD/T 1294-2003
|
Technical requirements of optical transceiver modules for ATM passive optical networks (A-PON). 155Mb/s burst-mode transceiver modules
|
|
YD/T 1295-2003
|
Technical specification for routing protocol based on IPv6. OSPF protocol
|
|
YD/T 1296-2003
|
Technical specification for public IP voice switch
|
|
YD/T 1297-2003
|
General technical requirements IP telephony media gateway controller
|
|
YD/T 1298-2004
|
Access network technical specification. Based Phone line Networking Device(Home PNA1. 1)
|
|
YD/T 1299-2004
|
Technical requirements of SDH network performance. Jitter wander
|
|
YD/T 1299-2015
|
(Synchronous Digital Hierarchy (SDH) network jitter and wander performance technical requirements)
|
|
YD/T 1300-2004
|
Technical requirements of SDH network performance. Error for path, multiplex and regenerator sections
|
|
YD/T 1301-2004
|
Test methods for access network. 26GHz local Multi-point Distribution System (LMDS)
|
|
YD/T 1302-2004
|
National NO.7 signaling system technical requirement. GSM mobile user part (MTUP)
|
|
YD/T 1303-2004
|
No.7 signaling surveillance system Technical requirement
|
|
YD/T 1304-2004
|
Test specification for national No.7 signaling system. Message Transfer Part (MTP) and Telephone User Part (TUP)
|
|
YD/T 1305-2004
|
900/1800MHz TDMA Digital cellular mobile telecommunication network technical specification of network management interface for CAMEL2 network
|
|
YD/T 1306-2004
|
800MHz CDMA digital cellular mobile communication network Wireless Intelligent Network (WIN). Phase 1: Test method for prepaid charging service
|
|
YD/T 1307-2004
|
800MHz CDMA digital cellular mobile telecommunication network Wireless Intelligent Network (WIN). Phase 1: Interface test method
|
|
YD/T 1308-2004
|
The technical requirements of intelligent public telephone system
|
|
YD/T 1309-2004
|
Beaer independent call bearer control specification
|
|
YD/T 1310-2004
|
The requirements of internet advertising e-mail format
|
|
YD/T 1311-2004
|
Specification of internet Anti-Spam
|
|
YD/T 1312.10-2007
|
Requirements and Measurement Methods of Electromagnetic Compatibility for Radio Communication Equipment. Part 10: 400/1800 MHz SDMA Radio Access System: Base Station, Repeater, Base Station Controller and Ancillary Equipment
|
|
YD/T 1312.11-2010
|
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 11: Fixed broadband wireless access system user equipment and its ancillary equipment
|
|
YD/T 1312.1-2004
|
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment Part 1: common technical requirements
|
|
YD/T 1312.1-2008
|
Requirements and Measurement Methods of Electromagnetic Compatibility for Radio Communication Equipment. Part 1: Common Technical Requirements
|
|
YD/T 1312.1-2015
|
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment Part 1: Common technical requirements
|
|
YD/T 1312.12-2012
|
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 12: fixed broadband wireless access system basestation and its ancillary equipment
|
|
YD/T 1312.13-2013
|
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 13: power adapter of mobile telecommunication terminal equipment
|
|
YD/T 1312.14-2012
|
Requirements and measurements methods of electromagnetic compatibility for radio communication equipment. Part 14: very small aperture teiminal, satellite interactive earth stations (operated in the frequency ranges between 4GHz and 30GHz in the fixed sat
|
|
YD/T 1312.15-2013
|
Requirements and measurements methods of electromagnetic compatibility for radio communication equipment. Part 15: ultra wide band(UWB)communications devices
|
|
YD/T 1312.16-2015
|
(The wireless communication device electromagnetic compatibility requirements and measuring methods - Part 16: Mobile Satellite Communication System terminal earth stations)
|
|
YD/T 1312.2-2004
|
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 2: wideband radio equipment
|
|
YD/T 1312.3-2004
|
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 3: Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech)
|
|
YD/T 1312.4-2004
|
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 4: radio paging system
|
|
YD/T 1312.5-2004
|
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 5: Radio Frequency (RF) audio link equipment and wireless microphones
|
|
YD/T 1312.6-2004
|
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 6: available amateur radio equipment
|
|
YD/T 1312.7-2004
|
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 7: trucked radio (TETRA) equipment
|
|
YD/T 1312.8-2004
|
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment Part 8: Short Range Devices (SRD) (9kHz～40GHz)
|
|
YD/T 1312.8-2012
|
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment. Part 8: short range devices (SRD) (9kHz~40GHz)
|
|
YD/T 1312.9-2007
|
Requirements and Measurement Methods of Electromagnetic Compatibility for Radio Communication Equipment. Part 9: 400/1800 MHz SDMA Radio Access System: User Equipment and Ancillary Equipment
|
|
YD/T 1313-2004
|
Generic distribution cabinet for broadband datacomms
|
|
YD/T 1313-2008
|
Generic Distribution Cabinet for Broadband Access
|
|
YD/T 1314-2004
|
Test method for access network. Very-high-speed Digital Subscriber Line (VDSL)
|
|
YD/T 1315-2004
|
Test method of adaption layer of No. 7 signalling interworking with IP-Message Transfer Part(MTP)level 2 peer-to-peer adaption layer
|
|
YD/T 1316-2004
|
Adaptation layer test method for No. 7 signaling system interworking with IP-Message Transfer Part(MTP)Level 3 User Adaptation Layer(M3UA)
|
|
YD/T 1317-2004
|
IP network technical requirement. Interworking with PSTN, ATM, Mobile Network
|
|
YD/T 1318-2004
|
Technical condition of 1310nm/1550nm single filber bi-directional assembly (module) for short reach
|
|
YD/T 1319-2004
|
Telecommunication cable-Foamed polyethylene dielectric, braided outer conductor, 50 ohm radio frequency coaxial cable for wireless telecommunication
|
|
YD/T 1319-2013
|
Telecommunication cable 500 radio frequency coaxial cable for wireless telecommucation with foamed polyolefin dielectric and braided outer conductor
|
|
YD/T 1320-2004
|
Technical requirements and tests methods of optical Dense Wavelength Division Multiplexer/demultiplexer
|
|
YD/T 1321.1-2004
|
Technical condition of the transponder with multiplex/demultiplex functions. Part 1: 2.5Gbit/s transponder
|
|
YD/T 1321.2-2004
|
Technical condition of the transponder with multiplex/demultiplex functions. Part 2: 10Gbit/s transponder
|
|
YD/T 1322.1-2004
|
Electronic commerce technical specification. Part one: XML-based (B2C) electronic commerce technical framework
|
|
YD/T 1322.2-2004
|
Electronic commerce technical specification. Part two: payment gateway
|
|
YD/T 1322.3-2004
|
Electronic commerce technical specification. Part there: certificate and certificate system
|
|
YD/T 1322.4-2004
|
Electronic commerce technical specification. Part four: presentation layer syntax of voucher
|
|
YD/T 1323-2004
|
Technical requirements for access network Asymmetric Digital Subscriber Line (ADSL)
|
|
YD/T 1324-2004
|
Unplasticized polyvinyl chloride (PVC-U) multi-hole pipe for buried telecommunication conduit
|
|
YD/T 1325-2004
|
Contactless inductive AC Voltage stabilizer
|
|
YD/T 1326-2004
|
Technical requirements of coarse wavelength division multiplexing (CWDM)
|
|
YD/T 1326-2013
|
Technical requirements of coarse wavelength division multiplexing (CWDM)
|
|
YD/T 1327-2004
|
Technical requirements and testing methods of Coarse Wavelength Division Multiplexer (CWDM) /Demulyiplexer
|
|
YD/T 1328-2004
|
The technical requirement and test method for the charging performance of currently used central office switching equipment-mobile network part
|
|
YD/T 1328-2009
|
The technical requirement and test method for the charging performance of currently used central office switching equipment. mobile network part
|
|
YD/T 1328-2015
|
(Digital cellular mobile communication network voice service billing system metering performance technical requirements and test methods)
|
|
YD/T 1329-2004
|
Integrated Circuit for The overvoltage and overcurrent protection of telecommunications installations
|
|
YD/T 1330-2004
|
Technical requirements and testing methods for data communication interface converters
|
|
YD/T 1331-2004
|
Technical requirements of Service Switching Point (SSP) equipment for Wireless Intelligent Network (WIN). Phase2: In 800MHz CDMA digital cellular mobile telecommunication network
|
|
YD/T 1332-2004
|
Technical requirements of Service Switching Point (SMP) equipment for Wireless Intelligent Network (WIN). Phase2: In 800MHz CDMA digital cellular mobile telecommunication network
|
|
YD/T 1333-2004
|
Technical requirements of Service Switching Point (SCP) equipment for Wireless Intelligent Network (WIN). Phase 2: In 800MHz CDMA digital cellular mobile telecommunication network
|
|
YD/T 1334-2004
|
Technical requirements of Service Switching Point (IP) equipment for Wireless Intelligent Network (WIN) phase2 In 800MHz CDMA digital cellular mobile telecommunication network
|
|
YD/T 1335-2005
|
800MHz CDMA digital cellular mobile telecommunication network technical specification of Wireless Intelligent Network (WIN) phase2
|
|
YD/T 1336-2005
|
800MHz CDMA digital cellular mobile telecommunication network Wireless Intelligent Network (WIN). Phase 2: Interface test method
|
|
YD/T 1337-2005
|
Technical requirements and testing methods for 900/1800MHz repeater for TDMA digital cellular mobile communication network
|
|
YD/T 1338-2005
|
The technical requirements of called party number for inter-public telecom network
|
|
YD/T 1339-2005
|
Test methods of metropolitan optical transport network WDM ring
|
|
YD/T 1340.1-2005
|
Technical requirements of Authentication Authorization Accounting (AAA) server interfaces. Part 1: Network Access Server (NAS)
|
|
YD/T 1340.2-2005
|
Technical requirements of Authentication Authorization Accounting (AAA) server interface. Part 2: Broad Network Access Server (BNAS)
|
|
YD/T 1340.3-2005
|
Technical requirements of Authentication Authorization Accounting (AAA) server interfaces. Part 3: IP Phone
|
|
YD/T 1341-2005
|
Internet Protocol version6(IPv6) specification
|
|
YD/T 1342-2005
|
IPv6 routing protocol. Border Gateway Protocol4 (BGP4) for IPv6
|
|
YD/T 1343-2005
|
Technical specification for neighbor discovery protocol IPv6
|
|
YD/T 1344-2005
|
IPv6 address structure protocol. IPv6 stateless address auto configuration
|
|
YD/T 1345-2005
|
Technical Requirements for SDH-based MSTP Embedded with RPR
|
|
YD/T 1346-2005
|
Test specification for SDH-based MSTP Embedded with RPR
|
|
YD/T 1347-2005
|
Technical requirements for access network. Remote management of Asymmetric Digital Subscriber Line (ADSL) CPE
|
|
YD/T 1348-2005
|
Technical requirement for access network. Asymmetric Digital Subscriber Line (ADSL) automatic testing system
|
|
YD/T 1349-2005
|
Technical Requirements and Testing Methods for 2.4GHzDigital Cordless Telephone Sets
|
|
YD/T 1350.1-2005
|
Technical specification of Wavelength Division Multiplexing (WDM) system network management interface. Part 1: Interface function part
|
|
YD/T 1350.2-2005
|
Technical specification of Wavelength Division Multiplexing (WDM) system network management interface. Part 2: The generic information model part
|
|
YD/T 1350.3-2005
|
Technical specification of WDiM network management interface. Part 3: linformation model based on GDMO/CMIP part
|
|
YD/T 1350.4-2007
|
Technical specification for interface of WDM network management system. Part 4: Interface based on CORBA/IDL
|
|
YD/T 1351-2005
|
Technical requirement and test methods of optical transceiver module for coarse wavelength division multiplexing system
|
|
YD/T 1352-2005
|
Technical requirement and test method of gigabit Ethernet optical transceiver module
|
|
YD/T 1353-2005
|
Technical requirement and test method of the high speed photodetector-preampligier used for the optical fiber communication
|
|
YD/T 1353-2015
|
(High-speed optical communication light detector - preamplifier assembly technical requirements and test methods)
|
|
YD/T 1354-2005
|
Technical requirement and test method of optical interleaver
|
|
YD/T 1355-2005
|
Technical requirements and test method of Mini-BITS equipment
|
|
YD/T 1356-2005
|
The specification for user power feeding of ISDA basic access U interface on the switch
|
|
YD/T 1357-2005
|
The test specification of intelligent network equipment integrated Service Control Point (ISCP)
|
|
YD/T 1358-2005
|
Security requirements of medium-end and low-end router
|
|
YD/T 1359-2005
|
Security requirements of high-end router
|