|
Std ID |
Description (Standard Title) |
|
YD/T 3539.2-2021
|
(400Gbit/s stage optical propagation integrated module - Part 2: 1×400Gbit/s)
|
|
YD/T 3692.3-2021
|
(Intelligent Optical Distribution Network Technical Requirements for Intelligent Access Control - Part 3: Intelligent Access Control Management Terminal and Application)
|
|
YD/T 2796.5-2021
|
(Parallel Transmission Active Optical Cable Optical Module - Part 5: 400Gb/s AOC)
|
|
YD/T 3421.7-2021
|
(Broadband Customer Intelligent Gateway Based on Public Telecommunication Network - Part 7: Technical Requirements for Enterprise Intelligent Gateway)
|
|
YD/T 1181.6-2020
|
(Characteristics of non-metallic reinforcements for optical cables - Part 6: Fiberglass tape)
|
|
YD/T 1813.2-2020
|
(Fiber amplifiers for communications Pump laser components - Part 2: 14xxnm pump laser components)
|
|
YD/T 2283-2020
|
(Submarine cable)
|
|
YD/T 2796.4-2020
|
(Parallel transmission active optical cable optical module - Part 4: 200Gb/s AOC)
|
|
YD/T 3132.3-2020
|
(Fibre-entry equipment for household installation - Part 3: Cable ducts and trunking accessories)
|
|
YD/T 3357.4-2020
|
(100Gb/s QSFP28 optical transceiver module - Part 4: 4 × 25Gb/s PSM4)
|
|
YD/T 3357.5-2020
|
(100Gb/s QSFP28 optical transceiver module - Part 5: 4 × 25Gb/s ER4 Lite)
|
|
YD/T 3538.3-2020
|
(400Gb/s intensity modulation pluggable optical transceiver unity - Part 3: 4 × 100Gb/s)
|
|
YD/T 3686-2020
|
(Super 100Gb/s Optical Transport Network (OTN) network technical requirements)
|
|
YD/T 3687-2020
|
(Technical requirements for software-defined transport network (SDTN) general information model)
|
|
YD/T 3688-2020
|
(Technical requirements for software-defined packet transport network (SPTN) southbound interface)
|
|
YD/T 3692.1-2020
|
(Intelligent optical distribution network Intelligent access control technical requirements - Part 1: Overall)
|
|
YD/T 3712.1-2020
|
(200Gb/s intensity modulation optical transceiver module - Part 1: 4 × 50Gb/s)
|
|
YD/T 3713-2020
|
(50Gb/s PAM4 modulated optical transceiver module)
|
|
YD/T 3714.1-2020
|
(Optical cable online monitoring OTDR module - Part 1: For DWDM system)
|
|
YD/T 3715-2020
|
(IP video optical transmission module)
|
|
YD/T 3718-2020
|
(Low-smoke and low-halogen flame-retardant soft polyvinyl chloride plastic for communication cable and optical cable)
|
|
YD/T 908-2020
|
Naming rules for type of optical fibre cables
|
|
YD/T 1588.1-2020
|
(Optical cable line performance measurement method - Part 1: Link attenuation)
|
|
YD/T 1588.2-2020
|
(Optical fiber cable line performance measurement method - Part 2: Optical fiber connector loss)
|
|
YD/T 2150-2020
|
(Optical fiber distribution box)
|
|
YD/T 2759.2-2020
|
(Single fiber bidirectional optical transceiver module - Part 2: 25Gb/s)
|
|
YD/T 2798.2-2020
|
(Test method of optical transceiver integrated module for optical communication - Part 2: Multi-wavelength type)
|
|
YD/T 3356.2-2020
|
(Optical transceiver components at 100Gb/s and above - Part 2: 4×25Gb/s LR4)
|
|
YD/T 3421.9-2020
|
(Broadband customer intelligent gateway based on public telecommunication network - Part 9: Technical requirements for interface between home intelligent gateway and intelligent home networking equipment)
|
|
YD/T 3692.2-2020
|
(Intelligent Optical Distribution Network Technical Requirements for Intelligent Access Control - Part 2: Interface Requirements)
|
|
YD/T 3347.2-2020
|
(Broadband customer intelligent gateway test method based on public telecommunication network - Part 2: Interface between gateway and gateway management platform)
|
|
YD/T 3770-2020
|
(Software-defined synchronization network technical requirements)
|
|
YD/T 3783-2020
|
(N×400Gb/s optical wavelength division multiplexing (WDM) system technical requirements)
|
|
YD/T 3786-2020
|
(N×400Gb/s optical wavelength division multiplexing (WDM) system test method)
|
|
YD/T 1118.1-2019
|
Secondary coating materials used for loose tube of optical fibre -- Part 1: Polybutylene terephthalate
|
|
YD/T 1118.2-2019
|
Secondary coating materials used for loose tube of optical fiber. Part 2: Modified propylene resin
|
|
YD/T 1258.4-2019
|
Indoor optical fibre cables. Part 4: Multi-fibre optical cables
|
|
YD/T 1258.5-2019
|
Indoor optical fibre cables. Part 5: Optical fibre ribbon cables
|
|
YD/T 1258.7-2019
|
The series of indoor optical fibre cables. Part 7: Invisible optical fibre cable
|
|
YD/T 1272.5-2019
|
Optical fiber connector. Part 5: Type MPO
|
|
YD/T 1449.5-2019
|
Technical requirements for equipments in broadband customer network based on telecommunication network. Part 5: Gateway supporting bonding uplinks of PON and mobile-cell
|
|
YD/T 1460.4-2019
|
Telecommunication microduct optical fibre cables and fibre units
|
|
YD/T 1990-2019
|
(Overall technical requirements for optical transport network (OTN) networks)
|
|
YD/T 2375-2019
|
Technical requirements for high accuracy time synchronization
|
|
YD/T 2797.3-2019
|
Technical requirements of optical fibre preform for telecommunication. Part 3: Characteristics for extended wavelength band dispersion unshifted single-mode optical fibre assembled preform
|
|
YD/T 2804.5-2019
|
40Gbit/s/100Gbit/s intensity modulation pluggable transceiver module. Part 5: 4×25Gbit/s CFP2
|
|
YD/T 2904.3-2019
|
Integrated tunable laser assembly. Part 3: Dual-channel assembly
|
|
YD/T 2969.4-2019
|
100 Gbit/s Dual Polarization. Quadrature Phase Shift Keying transceiver. Part 4: CFP2-DCO optical module
|
|
YD/T 3125.2-2019
|
Enhanced SFP transceiver (SFP+) used in communication. Part 2: 25Gbit/s
|
|
YD/T 3248.5-2019
|
Installation performance test methods for telecommunication optical fibre cables. Part 5: Blowing test through microduct on drum
|
|
YD/T 3287.4-2019
|
Test methods for interfaces in intelligent optical distribution network. Part 4: The interface between network management system and operation support system
|
|
YD/T 3421.2-2019
|
(Broadband customer intelligent gateway based on public telecommunication network. Part 2: Technical requirements for home intelligent gateway)
|
|
YD/T 3421.6-2019
|
(Broadband customer intelligent gateway based on public telecommunication network. Part 6: Requirements for fault diagnosis parameters)
|
|
YD/T 3538.1-2019
|
(400Gbit / s intensity modulation pluggable optical transceiver integrated module Part 1: 16 × 25Gbit / s)
|
|
YD/T 3538.2-2019
|
(400Gbit / s intensity modulation pluggable optical transceiver integrated module Part 2: 8 × 50Gbit / s)
|
|
YD/T 3539.1-2019
|
(400Gbit / s Phase Modulation Optical Transceiver Integrated Module Part 1: 2 × 200Gbit / s)
|
|
YD/T 3541-2019
|
(Optical fiber array for planar optical waveguide device)
|
|
YD/T 3566-2019
|
(Test method for intelligent optical distribution network management system)
|
|
YD/T 3322-2018
|
Technical requirement and test method of insulation safety sheath for overhead steel strand used on telecommunication
|
|
YD/T 3328-2018
|
(Method for determination of coumarone and strontium content)
|
|
YD/T 3330-2018
|
Test methods of BeiDou Timing equipment used in communication
|
|
YD/T 1118.3-2018
|
Secondary coating materials used for optical fiber - Part 3: Modified polycarbonate
|
|
YD/T 1181.5-2018
|
Characteristics of non-metal reinforcement for optical fiber cables--Part 5: Basalt fiber reinforced plastic rods
|
|
YD/T 1272.1-2018
|
(Fiber optic patch cords Part 1: LC type)
|
|
YD/T 1272.4-2018
|
Optical fiber connector--Part 4: Type FC
|
|
YD/T 1351-2018
|
Optical transceiver module for coarse wavelength division multiplexing
|
|
YD/T 1460.1-2018
|
Telecommunication microduct optical fibre cables and fibre units for installation by blowing--Part 1: General
|
|
YD/T 1688.6-2018
|
Technical specification of optical transceiver module for xPON -- Part 6: Optical transceiver module for NG-PON2 stack type OLT/ONU
|
|
YD/T 1688.8-2018
|
The optical subassembly of transmitter and receiver at 100Gb/s and above bitrate--Part 1: 4×25Gb/s CLR4
|
|
YD/T 1688.9-2018
|
Technical specification of optical transceiver module for xPON -- Part 9: Optical transceiver module for XGS-PON OLT/ONU
|
|
YD/T 1813.1-2018
|
Pump laser assembly of fiber amplifier in telecommunication--Part 1: 980nm pump laser assembly
|
|
YD/T 2000.2-2018
|
Integrated optical path devices based on planar light-wave circuit--Part 2: DWDM filter based on AWG technology
|
|
YD/T 2003-2018
|
Technical requirements for Reconfigurable Optical Add Drop Multiplexing (ROADM) equipment
|
|
YD/T 2153-2018
|
Optical performance monitor
|
|
YD/T 2376.5-2018
|
Technical requirements for security of transport network equipment--Part 5: OTN equipment
|
|
YD/T 2376.6-2018
|
Technical requirements for security of transport network equipment--Part 6: PTN equipment
|
|
YD/T 2796.3-2018
|
Parallel active optical cable transceiver -- Part 3: 4×25Gb/s AOC
|
|
YD/T 2797.2-2018
|
(Technical requirements for optical fibre preforms for communication - Part 2: bending loss insensitive single-mode optical fibre preforms)
|
|
YD/T 2799.3-2018
|
Technical specification of integrated intradyne coherent receiver--Part 3: 100Gbit/s micro-intradyne coherent receiver
|
|
YD/T 2896.22-2018
|
Interface specification requirements for intelligent optical distribution network--Part 22: The interface between intelligent optical distribution network equipment and management system based on socket
|
|
YD/T 2904.2-2018
|
Integrated tunable laser assembly--Part 2: micro assembly
|
|
YD/T 2969.2-2018
|
100Gbit/s DP-QPSK transceiver--Part 2: CFP coherent module
|
|
YD/T 2969.3-2018
|
100Gbit/s DP-QPSK transceiver--Part 3: CFP2-ACO module
|
|
YD/T 3132.2-2018
|
Components and materials for fiber-to-the-home drop cable installation--Part 2: Pipes and pipe accessories
|
|
YD/T 3251.7-2018
|
Passive device for signal distributing system of mobile communications - Part 7: Attenuator
|
|
YD/T 3287.3-2018
|
Test methods for interfaces in intelligent optical distribution network--Part 3: The interface between intelligent management terminal and intelligent optical distribution network management system
|
|
YD/T 3347.1-2018
|
(Broadband customer intelligent gateway test method based on public telecommunication network Part 1: Home intelligent gateway)
|
|
YD/T 3348-2018
|
Characteristics of cut-off wavelength shifted single-mode optical fibre
|
|
YD/T 3349.1-2018
|
Lightweight optical fibre cables for access network -- Part 1: Central tube type
|
|
YD/T 3349.2-2018
|
Lightweight optical fibre cables for access network--Part 2: Bunchy-core type
|
|
YD/T 3349.3-2018
|
Lightweight optical fibre cables for access network--Part 3: Stranded tube type
|
|
YD/T 3350.1-2018
|
Gel-free optical fiber cables for outdoor application for telecommunication -- Part 1: Stranded loose tube cables
|
|
YD/T 3353.1-2018
|
Color masterbatch for telecommunication cable and optical fiber cable -- Part 1: Color masterbatch used for optical fiber loose tube
|
|
YD/T 3356.1-2018
|
The optical subassembly of transmitter and receiver at 100Gb/s and above bitrate--Part 1: 4×25Gb/s CLR4
|
|
YD/T 3357.1-2018
|
100Gb/s QSFP28 optical transceiver--Part 1: 4×25Gb/s SR4
|
|
YD/T 3357.2-2018
|
100Gb/s QSFP28 optical transceiver--Part 2: 4×25Gb/s LR4
|
|
YD/T 3357.3-2018
|
100Gb/s QSFP28 optical transceiver--Part 3: 4×25Gb/s CLR4
|
|
YD/T 3358.1-2018
|
(Dual channel optical transceiver module 1 Part 1: 2 × 10Gb / s)
|
|
YD/T 3358.2-2018
|
Dual channel-optical transceiver -- Part 2: 2×25Gb/s
|
|
YD/T 3391-2018
|
General technical requirements for optical wavelength division multiplexing systems
|