|
Std ID |
Description (Standard Title) |
|
QC/T 316-2017
|
Automobile service brake fatigue strength bench test methods
|
|
QC/T 789-2017
|
Technical requirements and bench test methods of automobile electric vortex retarder assembly
|
|
QC/T 1089-2017
|
Requirements and test methods for regenerative braking system in electric vehicles
|
|
QC/T 1028-2016
|
Performance requirements and test methods of vehicle vacuum check valve
|
|
QC/T 1033-2016
|
Air brake - Performance requirements and bench test methods of external automatic brake adjuster
|
|
QC/T 1046-2016
|
Performance requirements and bench test methods for commercial vehicle secondary hydraulic retarder
|
|
QC/T 29078-2016
|
Performance requirements and bench test methods of vehicle air compressor
|
|
QC/T 307-2016
|
Performance requirements and bench test methods of vacuum booster for automobile
|
|
QC/T 1004-2015
|
Performance Requirements and Bench Test Methods of Automobile Electric Vacuum Pump
|
|
QC/T 200-2015
|
Performance requirements and test methods of reservoir for air brake equipment of automobile and trailer
|
|
QC/T 239-2015
|
Specifications and bench test methods for commercial vehicle service brake
|
|
QC/T 1005-2015
|
Specifications and bench test methods of automobile antilock braking system electromagnetic-hydraulic modulator
|
|
QC/T 1006-2015
|
Specifications and bench test methods of automobile antilock braking system solenoid modulator for pneumatic
|
|
QC/T 35-2015
|
Automobile and trailer - Specifications and bench test methods of pressure control equipment
|
|
QC/T 37-2015
|
Automobile and trailer. Specifications and test methods of bench for pressure regulator and protector
|
|
QC/T 764-2015
|
Road vehicles - Hydraulic braking system - Simple flare pipes, tube tapped holes, male fittings and hose end fittings
|
|
QC/T 77-2015
|
Specifications and bench test methods of automobile hydraulic brake wheel cylinder
|
|
QC/T 996-2015
|
Specifications and bench test methods of automobile air dryer
|
|
QC/T 593-2014
|
Performance requirements and bench test methods of automobile hydraulic proportional valve
|
|
QC/T 592-2013
|
Performance requirements and Bench test methods for Hydraulic brake caliper assembly
|
|
QC/T 958-2013
|
Performance requirements and bench test methods of automobile vacuum pump
|
|
QC/T 959-2013
|
Performance requirements and bench test methods of mechanical parking-brake control lever assembly
|
|
QC/T 960.1-2013
|
Road vehicle-Hydraulic braking systems. Part 1: Double-flare pipes, tapped holes, male fittings and tube seats
|
|
QC/T 961-2013
|
Performance Requirements and Bench Test Methods of Hydraulic Brake System Plastic Reservoir Assembly
|
|
QC/T 80-2011
|
Road vehicles. Polyamide (PA) tubing for air braking systems
|
|
QC/T 564-2008
|
Performance requirements and bench test methods for passenger car brake
|
|
QC/T 311-2008
|
Performance requirements and bench test methods of automobile brake master cylinder
|
|
QC/T 79.2-2008
|
Road vehicles. Coiled tube assemblies for air brake connection between towing and towed vehicles. Part 2: Performance requirements
|
|
QC/T 788-2007
|
Performance requirements and bench test methods of automobile pedal device
|
|
QC/T 789-2007
|
Performance requirements and bench test methods of automobile electric vortex retarder assembly
|
|
QC/T 790-2007
|
Performance requirements and bench test methods for brake chamber
|
|
QC/T 764-2006
|
Department of automobile hydraulic brake metal tube, inside and outside the threaded pipe joints and hose end fittings
|
|
QC/T 307-1999
|
Technical specifications for vacuum booster
|
|
QC/T 308-1999
|
(Vacuum booster test methods)
|
|
QC/T 309-1999
|
(Working diameter of the brake drum and brake shoe width dimension Brake)
|
|
QC/T 311-1999
|
Technical Specifications of Automobile Brake Master Cylinder
|
|
QC/T 315-1999
|
(Standard Test Method for mini cars move off the rectifier car strengthening)
|
|
QC/T 316-1999
|
Bench Test Methods of Fatigue Strength for Automobile Service Brake
|
|
QC/T 472-1999
|
Motor vehicles. Brake linings resistance to water, saline solution, oil and brake fluid. Test procedure
|
|
QC/T 473-1999
|
Motor vehicles. Brake linings internal shear strength of lining material. Test procedure
|
|
QC/T 479-1999
|
Trucks and buses. Brake. Bench test methods
|
|
QC/T 520-1999
|
(Automotive brake friction material inertia test methods)
|
|
QC/T 556-1999
|
Automobile Brake Temperature Measurement and Thermocouple Mounting
|
|
QC/T 564-1999
|
Passenger Car Brake - Bench Test Method
|
|
QC/T 582-1999
|
Limousine Brake Performance Requirements
|
|
QC/T 583-1999
|
Test Methods for Lining Apparent Porosity of Automotive Brake
|
|
QC/T 592-1999
|
Performance Requirements and Bench Test Methods for Limousine Brake Caliper Assembly
|
|
QC/T 593-1999
|
(Hydraulic load sensing proportioning valve technical conditions)
|
|
QC/T 237-1997
|
Bench Test Methods for the Performance of Automobile Parking Brake
|
|
QC/T 239-1997
|
Performance Requirements for Truck & Bus Brakes
|
|
QC/T 200-1995
|
Air Cylinder for Pneumatic Braking of Automobiles - Technical Conditions
|
|
QC/T 201-1995
|
(Thermoplastic automotive air brake fitting size)
|
|
QC/T 77-1993
|
Specifications of Drum Brake Wheel Cylinder Assembly for Automobile Hydraulic Braking
|
|
QC/T 20-1992
|
(Automotive pneumatic brake light switch technical conditions)
|
|
QC/T 29077-1992
|
(Grading quality automotive air compressor)
|
|
QC/T 29078-1992
|
Technical specifications for automobile air compressor
|
|
QC/T 29079-1992
|
(Use a non-petroleum-based brake fluid automobile hydraulic brake hose assembly quality grading)
|
|
QC/T 29080-1992
|
(Automotive air brake hose assembly quality grading)
|
|
QC/T 35-1992
|
Automobile and trailer - Test method of rack for pneumatic control device
|
|
QC/T 36-1992
|
Automobile and trailer - General technical specifications for pneumatic control device
|
|
QC/T 37-1992
|
Automobile and trailer -Technical specifications for pneumatic adjusting and protective device
|
|
QC/T 38-1992
|
Automobile and trailer - Test method for pneumatic adjusting and protective device stage
|
|
QC/T 42-1992
|
Test method for disk brake pad and assessment for surface and material defect of automobile
|
|
QC/T 1227-2025
|
Technical specifications for automobile bevel box
|
|
QC/T 1191-2023
|
(Passenger car steering gear rack)
|
|
QC/T 1081-2017
|
Automobile electrical power steering gear
|
|
QC/T 1082-2017
|
Electromotor for automobile electrical power steering
|
|
QC/T 1083-2017
|
Controller for Automobile Electrical Power Steering
|
|
QC/T 1084-2017
|
Sensor for Automobile Electrical Power Steering
|
|
QC/T 1012-2015
|
Technical Requirements and Determination for Motor Vehicles - Hydraulic Power Steering System Cleanliness
|
|
QC/T 648-2015
|
Performance requirements and bench test methods of automotive steering tie rod assy
|
|
QC/T 1013-2015
|
Technical requirement and test method for rotary shaft lip-type seals of steering input shaft
|
|
QC/T 29096-2014
|
The bench test methods of automobile steering gear
|
|
QC/T 29097-2014
|
The technical specifications of automobile steering gear
|
|
QC/T 299.1-2014
|
Automobile hydraulic steering power pump - Part 1: Technical requirements
|
|
QC/T 299.2-2014
|
Automobile hydraulic steering power pump - Part 2: Test method
|
|
QC/T 301-2014
|
Technical requirements and test methods for motor vehicles power cylinder
|
|
QC/T 303-2014
|
Technical requirements and test methods for motor vehicles oil reservoir
|
|
QC/T 563-2014
|
Performance and test methods for automobile steering wheel
|
|
QC/T 972-2014
|
Technical requirements and test method for motor vehicle - Electronically controlled hydraulic power steering gear
|
|
QC/T 305-2013
|
Motor vehicles. Hydraulic power steering control valve. Performance requirements and test methods
|
|
QC/T 529-2013
|
Motor vehicles - Hydraulic power steering gear - Technique requirements and test methods
|
|
QC/T 647-2013
|
Motor vehicles - Steering universal joint - Performance requirements and test methods
|
|
QC/T 649-2013
|
Motor Vehicles - Steering Control Mechanism - Performance Requirements and Test Methods
|
|
QC/T 241-2011
|
Air leakage test methods of automobile wheels for tubeless tires
|
|
QC/T 259-2011
|
Performance requirements and test methods of joint between rim and disc
|
|
QC/T 703-2004
|
Specification of PU foam wrap layer for auto steering-wheel
|
|
QC/T 704-2004
|
Test method of PU foam wrap layer integer hardness for auto steering-wheel
|
|
QC/T 299-2000
|
Automotive power steering pump technology conditions
|
|
QC/T 529-2000
|
Automotive power steering assembly bench test method
|
|
QC/T 530-2000
|
Automotive power steering assembly technical conditions
|
|
QC/T 647-2000
|
Automobile steering universal joint assembly performance requirements and test methods
|
|
QC/T 648-2000
|
Automobile steering rod assembly performance requirements and test methods
|
|
QC/T 649-2000
|
Automobile steering shaft assembly performance requirements and test methods
|
|
QC/T 650-2000
|
Automotive the Steering Rod Ball pin performance requirements and test methods
|
|
QC/T 290-1999
|
(Auto Radiator Quality Grading)
|
|
QC/T 299-1999
|
(Chinese Industry Standard)
|
|
QC/T 301-1999
|
(Power steering power cylinder technical conditions)
|
|
QC/T 302-1999
|
(Power steering power cylinder bench test method)
|
|
QC/T 303-1999
|
(Power steering oil tank technical conditions)
|