|
Std ID |
Description (Standard Title) |
Detail |
|
JB/T 3382.3-2006
|
Surface grinding machines with horizontal grinding wheel spindle and reciprocating table. Parameters
|
JB/T 3382.3-2006
|
|
JB/T 3382.3-2014
|
Surface grinding machines with horizontal grinding wheel spindle and reciprocating table. Part 3: Precision machines. Testing of the accuracy
|
JB/T 3382.3-2014
|
|
JB/T 3382.4-2014
|
Surface grinding machines with horizontal grinding wheel spindle and reciprocating table. Part 4: High accuracy machines - Testing of the accuracy
|
JB/T 3382.4-2014
|
|
JB/T 3384-1999
|
Sampling plans for high voltage insulators
|
JB/T 3384-1999
|
|
JB/T 3411.100-1999
|
Aligning rod. Dimensions
|
JB/T 3411.100-1999
|
|
JB/T 3411.101-1999
|
Changing diameter bush with 7: 24 taper/ mose taper. Dimensions
|
JB/T 3411.101-1999
|
|
JB/T 3411.10-1999
|
Clamp for squarel holder. Dimensions
|
JB/T 3411.10-1999
|
|
JB/T 3411.102-1999
|
Long changing diameter bush with 7: 24 taper/mose taper. Dimensions
|
JB/T 3411.102-1999
|
|
JB/T 3411.103-1999
|
Short changing diameter bush with 7: 24 taper/mose taper. Dimensions
|
JB/T 3411.103-1999
|
|
JB/T 3411.104-1999
|
Changing diameter bush with 7: 24 taper/positive mose taper. Dimensions
|
JB/T 3411.104-1999
|
|
JB/T 3411.105-1999
|
Long changing diameter bush with 7: 24 taper/positive mose taper. Dimensions
|
JB/T 3411.105-1999
|
|
JB/T 3411.106-1999
|
Short changing diameter bush with 7: 24 taper/positive mose taper. Dimensions
|
JB/T 3411.106-1999
|
|
JB/T 3411.107-1999
|
Changing diameter bush with 7: 24 taper/mose taper with tang. Dimensions
|
JB/T 3411.107-1999
|
|
JB/T 3411.108-1999
|
Changing diameter bush with 7: 24 taper. Dimensions
|
JB/T 3411.108-1999
|
|
JB/T 3411.109-1999
|
Changing diameter bush with mose taper. Dimensions
|
JB/T 3411.109-1999
|
|
JB/T 3411.110-1999
|
Milling arbor with 7: 24 taper shank. Dimensions
|
JB/T 3411.110-1999
|
|
JB/T 3411.111-1999
|
Milling arbor with mose taper shank. Dimensions
|
JB/T 3411.111-1999
|
|
JB/T 3411.11-1999
|
Clamp for round holder. Dimensions
|
JB/T 3411.11-1999
|
|
JB/T 3411.112-1999
|
Adjustment washer. Dimensions
|
JB/T 3411.112-1999
|
|
JB/T 3411.113-1999
|
Shaft bush for milling arbor. Dimensions
|
JB/T 3411.113-1999
|
|
JB/T 3411.114-1999
|
Nut. Dimensions
|
JB/T 3411.114-1999
|
|
JB/T 3411.115-1999
|
End milling arbor with 7: 24 taper shank and with longitudinal key. Dimensions
|
JB/T 3411.115-1999
|
|
JB/T 3411.116-1999
|
End milling arbor with mose taper shank and with longitudinal key. Dimensions
|
JB/T 3411.116-1999
|
|
JB/T 3411.117-1999
|
End milling arbor with 7: 24 taper shank and with end key. Dimensions
|
JB/T 3411.117-1999
|
|
JB/T 3411.118-1999
|
End milling arbor with mose taper shank and with end key. Dimensions
|
JB/T 3411.118-1999
|
|
JB/T 3411.119-1999
|
Locatrion shaft for facing type cutter. Dimensions
|
JB/T 3411.119-1999
|
|
JB/T 3411.1-1999
|
Elastic holder. Dimensions
|
JB/T 3411.1-1999
|
|
JB/T 3411.120-1999
|
Extension rod of drill chuck for milling machines. Dimensions
|
JB/T 3411.120-1999
|
|
JB/T 3411.121-1999
|
Quick-change changing diameter bush. Dimensions
|
JB/T 3411.121-1999
|
|
JB/T 3411.12-1999
|
Clamp for mose taper shank tool. Dimensions
|
JB/T 3411.12-1999
|
|
JB/T 3411.122-1999
|
Extension rod of quick-change drill chuck. Dimensions
|
JB/T 3411.122-1999
|
|
JB/T 3411.123-1999
|
Quick-change end milling arbor. Dimensions
|
JB/T 3411.123-1999
|
|
JB/T 3411.124-1999
|
Milling arbor quick-change unit. Dimensions
|
JB/T 3411.124-1999
|
|
JB/T 3411.125-1999
|
Draw-bar for milling machines. Dimensions
|
JB/T 3411.125-1999
|
|
JB/T 3411.126-1999
|
Screw for end milling arbor. Dimensions
|
JB/T 3411.126-1999
|
|
JB/T 3411.127-1999
|
Wrench for screw for end milling arbor. Dimensions
|
JB/T 3411.127-1999
|
|
JB/T 3411.13-1999
|
Clamping bush for thread cutting die. Dimensions
|
JB/T 3411.13-1999
|
|
JB/T 3411.14-1999
|
Clamping bush for tap. Dimensions
|
JB/T 3411.14-1999
|
|
JB/T 3411.15-1999
|
Holder for taping and thread die cutting. Dimensions
|
JB/T 3411.15-1999
|
|
JB/T 3411.16-1999
|
Internal square set screws. Dimensions
|
JB/T 3411.16-1999
|
|
JB/T 3411.17-1999
|
Middle joint rod. Dimensions
|
JB/T 3411.17-1999
|
|
JB/T 3411.18-1999
|
Slider type manipulative holder for cylindric shank broach. Dimensions
|
JB/T 3411.18-1999
|
|
JB/T 3411.19-1999
|
Slider type automatic holder for cylindric shank broach. Dimensions
|
JB/T 3411.19-1999
|
|
JB/T 3411.20-1999
|
Wrench for holder for cylindric shank broach. Dimensions
|
JB/T 3411.20-1999
|
|
JB/T 3411.21-1999
|
Adjustable centre joint. Dimensions
|
JB/T 3411.21-1999
|
|
JB/T 3411.2-1999
|
Multiple-purpose holder. Dimensions
|
JB/T 3411.2-1999
|
|
JB/T 3411.22-1999
|
Holder for keyway broach. Dimensions
|
JB/T 3411.22-1999
|
|
JB/T 3411.23-1999
|
Guide bush for single key broach. Dimensions
|
JB/T 3411.23-1999
|
|
JB/T 3411.24-1999
|
Washer for keyway broaching. Dimensions
|
JB/T 3411.24-1999
|
|
JB/T 3411.25-1999
|
Support for guide bush for single key broach. Dimensions
|
JB/T 3411.25-1999
|
|
JB/T 3411.26-1999
|
Ball support for broachers. Dimensions
|
JB/T 3411.26-1999
|
|
JB/T 3411.27-1999
|
Holder for slotplaning tool. Dimensions
|
JB/T 3411.27-1999
|
|
JB/T 3411.28-1999
|
Holder for planing tool. Dimensions
|
JB/T 3411.28-1999
|
|
JB/T 3411.29-1999
|
Sharp punch. Dimensions
|
JB/T 3411.29-1999
|
|
JB/T 3411.30-1999
|
Round punch. Dimensions
|
JB/T 3411.30-1999
|
|
JB/T 3411.31-1999
|
Tool for riveting round head rivets. Dimensions
|
JB/T 3411.31-1999
|
|
JB/T 3411.3-1999
|
Elastic swivel holder. Dimensions
|
JB/T 3411.3-1999
|
|
JB/T 3411.32-1999
|
Tool for assembly push-fit type grease nipples. Dimensions
|
JB/T 3411.32-1999
|
|
JB/T 3411.33-1999
|
Squarel piercer. Dimensions
|
JB/T 3411.33-1999
|
|
JB/T 3411.34-1999
|
Hexagon piercer. Dimensions
|
JB/T 3411.34-1999
|
|
JB/T 3411.35-1999
|
Male square wrench. Dimensions
|
JB/T 3411.35-1999
|
|
JB/T 3411.36-1999
|
Tee key for hexagon socket screws. Dimensions
|
JB/T 3411.36-1999
|
|
JB/T 3411.37-1999
|
Adjustable pin type face wrench. Dimensions
|
JB/T 3411.37-1999
|
|
JB/T 3411.38-1999
|
Pin wrench. Dimensions
|
JB/T 3411.38-1999
|
|
JB/T 3411.39-1999
|
Tee wrench for assembly double end studs. Dimensions
|
JB/T 3411.39-1999
|
|
JB/T 3411.40-1999
|
Tee adjustable tap wrench. Dimensions
|
JB/T 3411.40-1999
|
|
JB/T 3411.41-1999
|
Hand for dismounting broken tap. Dimensions
|
JB/T 3411.41-1999
|
|
JB/T 3411.4-1999
|
Holder for circular tool with micro-adjuster. Dimensions
|
JB/T 3411.4-1999
|
|
JB/T 3411.42-1999
|
Squarel head extension rod. Dimensions
|
JB/T 3411.42-1999
|
|
JB/T 3411.43-1999
|
Thruster. Dimensions
|
JB/T 3411.43-1999
|
|
JB/T 3411.44-1999
|
Pin puller. Dimensions
|
JB/T 3411.44-1999
|
|
JB/T 3411.45-1999
|
Bar holder for shell hand reamer. Dimensions
|
JB/T 3411.45-1999
|
|
JB/T 3411.46-1999
|
Vicejaw for flaring for thin wall pipe. Dimensions
|
JB/T 3411.46-1999
|
|
JB/T 3411.47-1999
|
Pincer for assembly spring thrust collar on shaft. Dimensions
|
JB/T 3411.47-1999
|
|
JB/T 3411.48-1999
|
Pincer for assembly spring thrust collar in hole. Dimensions
|
JB/T 3411.48-1999
|
|
JB/T 3411.49-1999
|
Clamp. Dimensions
|
JB/T 3411.49-1999
|
|
JB/T 3411.50-1999
|
Two jaws thruster. Dimensions
|
JB/T 3411.50-1999
|
|
JB/T 3411.51-1999
|
Three jaws thruster. Dimensions
|
JB/T 3411.51-1999
|
|
JB/T 3411.5-1999
|
Holder for parting tool. Dimensions
|
JB/T 3411.5-1999
|
|
JB/T 3411.52-1999
|
Hammer head. Dimensions
|
JB/T 3411.52-1999
|
|
JB/T 3411.53-1999
|
Copper hammer head. Dimensions
|
JB/T 3411.53-1999
|
|
JB/T 3411.54-1999
|
Scribing compass. Dimensions
|
JB/T 3411.54-1999
|
|
JB/T 3411.55-1999
|
Long scribing compass. Dimensions
|
JB/T 3411.55-1999
|
|
JB/T 3411.56-1999
|
Scribing hander. Dimensions
|
JB/T 3411.56-1999
|
|
JB/T 3411.57-1999
|
Scribing ruler support. Dimensions
|
JB/T 3411.57-1999
|
|
JB/T 3411.58-1999
|
Jacks. Dimensions
|
JB/T 3411.58-1999
|
|
JB/T 3411.59-1999
|
Changeable head jacks. Dimensions
|
JB/T 3411.59-1999
|
|
JB/T 3411.60-1999
|
V-body for scribing. Dimensions
|
JB/T 3411.60-1999
|
|
JB/T 3411.61-1999
|
Two end V-body with clamp. Dimensions
|
JB/T 3411.61-1999
|
|
JB/T 3411.6-1999
|
Squarel holder for 90-degree internal turning. Dimensions
|
JB/T 3411.6-1999
|
|
JB/T 3411.62-1999
|
Square V-body with clamp. Dimensions
|
JB/T 3411.62-1999
|
|
JB/T 3411.63-1999
|
Wing nut. Dimensions
|
JB/T 3411.63-1999
|
|
JB/T 3411.64-1999
|
Scribler. Dimensions
|
JB/T 3411.64-1999
|
|
JB/T 3411.65-1999
|
Tosecan. Dimensions
|
JB/T 3411.65-1999
|
|
JB/T 3411.66-1999
|
Big tosecan. Dimensions
|
JB/T 3411.66-1999
|
|
JB/T 3411.67-1999
|
Changing diameter bush for taper shank tool. Dimensions
|
JB/T 3411.67-1999
|
|
JB/T 3411.68-1999
|
Extension bush for taper shank tool. Dimensions
|
JB/T 3411.68-1999
|
|
JB/T 3411.69-1999
|
Extension bush with quide for taper shank tool. Dimensions
|
JB/T 3411.69-1999
|
|
JB/T 3411.70-1999
|
Elastic clamping bush for straight shank tool. Dimensions
|
JB/T 3411.70-1999
|
|
JB/T 3411.71-1999
|
Elastic clamping bush for tap. Dimensions
|
JB/T 3411.71-1999
|