|
Std ID |
Description (Standard Title) |
Detail |
|
JB/T 11686-2013
|
Twin-screw extruder for aquafeed
|
JB/T 11686-2013
|
|
JB/T 11687-2013
|
Single-screw extruder for aquafeed
|
JB/T 11687-2013
|
|
JB/T 11688-2013
|
Double-shaft paddle mixer for feed
|
JB/T 11688-2013
|
|
JB/T 11689-2013
|
Single-shaft paddle mixer for feed
|
JB/T 11689-2013
|
|
JB/T 11690-2013
|
Double-shaft paddle feed conditioner
|
JB/T 11690-2013
|
|
JB/T 11691-2013
|
Single-shaft paddle feed conditioner
|
JB/T 11691-2013
|
|
JB/T 11692-2013
|
Test method for paddle feed conditioners
|
JB/T 11692-2013
|
|
JB/T 11693-2013
|
The minimum allowable value of energy efficiency and energy efficiency grades for hammer mill for industry feed
|
JB/T 11693-2013
|
|
JB/T 11694-2013
|
The minimum allowable values of the energy efficiency and energy efficiency grade for paddle feed mixer
|
JB/T 11694-2013
|
|
JB/T 11695-2013
|
The minimum allowable value of the energy efficiency and energy efficiency grade for singel-screw extruder for aquatic feed
|
JB/T 11695-2013
|
|
JB/T 11696-2013
|
Heat-shrinkable market tubing
|
JB/T 11696-2013
|
|
JB/T 11697-2013
|
Heat-shrinkable diesel-resistance flexible tubing
|
JB/T 11697-2013
|
|
JB/T 11698-2013
|
Volute springs. Technical specifications
|
JB/T 11698-2013
|
|
JB/T 11699-2013
|
Technical specification for installation dismantlement and operation of temporarily installed suspended access equipment
|
JB/T 11699-2013
|
|
JB/T 11700-2013
|
Mobile elevating work platforms. Work platforms for bridge inspection and maintenance
|
JB/T 11700-2013
|
|
JB/T 11701-2013
|
Specification for electric wheelchair motors
|
JB/T 11701-2013
|
|
JB/T 11702-2013
|
Specification for capacitor motors for house use submersible pumps
|
JB/T 11702-2013
|
|
JB/T 11703-2013
|
Specification for room air conditioners burshless DC fan motors
|
JB/T 11703-2013
|
|
JB/T 11704-2013
|
The methods of energy efficiency measurement and energy saved calculating for variable frequency speed control system of belt conveyors
|
JB/T 11704-2013
|
|
JB/T 11705-2013
|
The methods of energy efficiency measurement and energy saved calculationg for switched reluctance drive system of belt conveyors
|
JB/T 11705-2013
|
|
JB/T 11706.1-2013
|
Energy efficiency grade for typical load unit driven by three-phase motor. Part 1: Energy efficiency grade of centrifugal pump unit for fresh water
|
JB/T 11706.1-2013
|
|
JB/T 11706.2-2015
|
Energy efficiency grade for typical load unit driven by three-phase motor. Part 2: Energy efficiency grade of screw air compressor unit
|
JB/T 11706.2-2015
|
|
JB/T 11707-2013
|
Specification for YE2 series(IP55)high efficiency three-phase induction motor(Frame size 80~355)
|
JB/T 11707-2013
|
|
JB/T 11708-2013
|
Specification for YFE2 series (IP55) high efficiency three-phase induction motor for fans purpose (frame size 80~400)
|
JB/T 11708-2013
|
|
JB/T 11709-2013
|
Specification for YSE2 series (IP55) high efficiency three-phase induction motor for pumps purpose (frame size 80~355)
|
JB/T 11709-2013
|
|
JB/T 11710-2013
|
Specification for YVF3 series (IP55) three-phase induction motor for variable frequency speed adjusting control (frame size 355~450)
|
JB/T 11710-2013
|
|
JB/T 11711-2013
|
Specification for high efficiency three-phase permanent magnet synchronous motor for refrigerator purpose(frame size 280~315）
|
JB/T 11711-2013
|
|
JB/T 11712-2013
|
Specification for YZTE3 series (IP55) premium efficiency three-phase induction motor with die-cast copper rotor (frame size 80~200)
|
JB/T 11712-2013
|
|
JB/T 11713-2013
|
Bag filter for liquid filtration
|
JB/T 11713-2013
|
|
JB/T 11714-2013
|
Controllable discharge disc separator
|
JB/T 11714-2013
|
|
JB/T 11715-2013
|
Methods of performance testing for scroll discharge centrifuge differential case
|
JB/T 11715-2013
|
|
JB/T 11716-2013
|
Vacuum technology. Screw dry vacuum pump
|
JB/T 11716-2013
|
|
JB/T 11717-2013
|
Hydraulic fluid power. Single-channel steady flow dividing valve for steering unit
|
JB/T 11717-2013
|
|
JB/T 11718-2013
|
Hydraulic cylinders. Technical conditions for cylinder tubes
|
JB/T 11718-2013
|
|
JB/T 11719-2013
|
Granular filler metal
|
JB/T 11719-2013
|
|
JB/T 11720-2013
|
Integrated induction heating controls
|
JB/T 11720-2013
|
|
JB/T 11721-2013
|
Liquid-filled metal diaphragm assembly for automatic electrical controls
|
JB/T 11721-2013
|
|
JB/T 11722-2013
|
Shunts for electric energy meters
|
JB/T 11722-2013
|
|
JB/T 11723-2013
|
The electrical control system of numerically controlled turning machines. Specifications
|
JB/T 11723-2013
|
|
JB/T 11724-2013
|
The electric control system of numerically control of grinding machine. Specification
|
JB/T 11724-2013
|
|
JB/T 11725-2013
|
Electrical control system of machine tools. Test specification of fault loop impedance
|
JB/T 11725-2013
|
|
JB/T 11726-2013
|
Electrical control system of machine tools. Test specification for residual voltage
|
JB/T 11726-2013
|
|
JB/T 11727-2013
|
The electrical control system of numerically control finger shaper machine. Specification
|
JB/T 11727-2013
|
|
JB/T 11728-2013
|
The electrical control system of numerically control high speed wood cut-off machines. Specification
|
JB/T 11728-2013
|
|
JB/T 11729-2013
|
Electrical equipment and system of industrial machines. Requirements of integral lighting
|
JB/T 11729-2013
|
|
JB/T 11730-2013
|
Electrical equipment and system of industrial machines. Specification of A.C.servo drive systems for plastic injection molding machines
|
JB/T 11730-2013
|
|
JB/T 11731-2013
|
Non-destructive testing. General specification for ultrasonic phased array probe
|
JB/T 11731-2013
|
|
JB/T 11732-2013
|
Chemically produced dry color toner
|
JB/T 11732-2013
|
|
JB/T 11733-2013
|
Calchined kaolin sand and poeder for investment casting
|
JB/T 11733-2013
|
|
JB/T 11734-2013
|
Gypsum molding poeder for investment casting
|
JB/T 11734-2013
|
|
JB/T 11735-2014
|
Safety technical requirements for high pressure diecasting of aluminum and zinc alloy
|
JB/T 11735-2014
|
|
JB/T 11736-2014
|
The ventilation and dust removal safety specification of magnesium alloy die casting in final finishing and machining process
|
JB/T 11736-2014
|
|
JB/T 11737-2014
|
The process specification of magnesium alloy die-casting bulk scrap recycling
|
JB/T 11737-2014
|
|
JB/T 11738-2013
|
TEA cured cold-box resin for foundry
|
JB/T 11738-2013
|
|
JB/T 11739-2013
|
No-bake alkaline phenolic resin for foundry
|
JB/T 11739-2013
|
|
JB/T 11740-2013
|
Masonry chisels
|
JB/T 11740-2013
|
|
JB/T 11741-2013
|
Brazed carbide tipped circular saw blades
|
JB/T 11741-2013
|
|
JB/T 11742-2013
|
Circular saw blade for cool metal cut
|
JB/T 11742-2013
|
|
JB/T 11743-2013
|
Grooving tools for titanium alloy and superalloy processing
|
JB/T 11743-2013
|
|
JB/T 11744-2013
|
Solid carbide rear wave end mill
|
JB/T 11744-2013
|
|
JB/T 11745-2013
|
Solid carbide step twist drill
|
JB/T 11745-2013
|
|
JB/T 11746-2013
|
Superhard boring reamer
|
JB/T 11746-2013
|
|
JB/T 11747-2013
|
Taps for sucker rod
|
JB/T 11747-2013
|
|
JB/T 11748-2013
|
Center drills with taper shank
|
JB/T 11748-2013
|
|
JB/T 11749-2013
|
Finger geal milling cutters
|
JB/T 11749-2013
|
|
JB/T 11750-2013
|
Pistol-girp hydraulic rivet driver
|
JB/T 11750-2013
|
|
JB/T 11751-2013
|
Numerical control tightening machine
|
JB/T 11751-2013
|
|
JB/T 11752-2013
|
Pneumatic chamfering machines
|
JB/T 11752-2013
|
|
JB/T 11753-2013
|
Pneumatic hydraulic jacks
|
JB/T 11753-2013
|
|
JB/T 11754-2013
|
Hydraullc-hose cutting machine
|
JB/T 11754-2013
|
|
JB/T 11755-2013
|
Hand-hold hydraulic expander
|
JB/T 11755-2013
|
|
JB/T 11756-2013
|
Hand-hold hydraulic shearing expander
|
JB/T 11756-2013
|
|
JB/T 11757-2013
|
Hydraulle open-pit drill wagon
|
JB/T 11757-2013
|
|
JB/T 11758-2013
|
Crawler integrative down-the-hole drill
|
JB/T 11758-2013
|
|
JB/T 11759-2013
|
Machining allowance and tolerance for cold rolled bearing ring
|
JB/T 11759-2013
|
|
JB/T 11760-2013
|
Technical requirements on precision cold forging of straight bevel gear
|
JB/T 11760-2013
|
|
JB/T 11761-2013
|
Specification of gear-shaft blank produced by cross wedge rolling
|
JB/T 11761-2013
|
|
JB/T 11762-2013
|
Coiled helical compression springs. Non-Destructive ultrasonic testing method
|
JB/T 11762-2013
|
|
JB/T 11763-2014
|
High-performance numerical control system of machine tool. Procedure for reliability evaluation
|
JB/T 11763-2014
|
|
JB/T 11765-2014
|
(Superhard nanocrystalline diamond abrasives)
|
JB/T 11765-2014
|
|
JB/T 11766-2014
|
Superabrasive products. Diamond flexible polishing pads
|
JB/T 11766-2014
|
|
JB/T 11767-2014
|
Hydro Static Spindles & Hydro Static Dynamic Spindles
|
JB/T 11767-2014
|
|
JB/T 11768-2014
|
Machine Tools - Manually Operated Self-centering Chucks with Precision Adjustment
|
JB/T 11768-2014
|
|
JB/T 11769.1-2014
|
Large-sized & Precision CNC Gear Hobbing Machines - Part 1: Testing of the Accuracy
|
JB/T 11769.1-2014
|
|
JB/T 11769.2-2014
|
Large-sized & Precision CNC Gear Hobbing Machines - Part 2: Specifications
|
JB/T 11769.2-2014
|
|
JB/T 11770.1-2014
|
High Speed & Precision CNC Rotary Table - Part 1: Testing of the Accuracy
|
JB/T 11770.1-2014
|
|
JB/T 11770.2-2014
|
High Speed & Precision CNC Rotary Table - Part 2: Specifications
|
JB/T 11770.2-2014
|
|
JB/T 11771-2014
|
Machine Tools - High Speed & High Precision Power Chucks - Classifications and Specifications
|
JB/T 11771-2014
|
|
JB/T 11772-2014
|
Machine Tools - Rotating Hydraulic Cylinders
|
JB/T 11772-2014
|
|
JB/T 11773.1-2014
|
CNC Spiral Rotor Milling Machines - Part 1: Testing of the Accuracy
|
JB/T 11773.1-2014
|
|
JB/T 11773.2-2014
|
CNC Spiral Rotor Milling Machines - Part 2: Specifications
|
JB/T 11773.2-2014
|
|
JB/T 11774.1-2014
|
NC Heavy Duty Crankshaft Whirlwind Lathe - Part 1: Parameters
|
JB/T 11774.1-2014
|
|
JB/T 11774.2-2014
|
NC heavy duty crankshaft whirlwind lathe. Part 2: Testing of the accuracy
|
JB/T 11774.2-2014
|
|
JB/T 11774.3-2014
|
NC heavy duty crankshaft whirlwind lathe. Part 3: Specifications
|
JB/T 11774.3-2014
|
|
JB/T 11775.1-2014
|
CNC bevel gear lapping machines. Part 1: Testing of the accuracy
|
JB/T 11775.1-2014
|
|
JB/T 11775.2-2014
|
CNC bevel gear lapping machines. Part 2: Specifications
|
JB/T 11775.2-2014
|
|
JB/T 11776.1-2014
|
Heavy duty movable portal-type turning-milling machining centers. Part 1: Testing of the accuracy
|
JB/T 11776.1-2014
|
|
JB/T 11776.2-2014
|
Heavy duty movable portal-type turning-milling machining centers. Part 2: Specification
|
JB/T 11776.2-2014
|
|
JB/T 11777.2-2017
|
Internal combustion engines-Cast aluminum cylinder heads - Part 2: Blank
|
JB/T 11777.2-2017
|
|
JB/T 11777-2014
|
Internal combustion engines. Cast aluminum cylinder heads. Specification
|
JB/T 11777-2014
|