GB/T 324-2008 PDF English
US$70.00 · In stock · Download in 9 secondsGB/T 324-2008: Weld symbolic representation on drawings Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid GB/T 324: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 324-2008 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Weld symbolic representation on drawings
| Valid |
| GB/T 324-1988 | English | RFQ |
ASK
|
9 days
|
Welds-symbolic representation on drawings
| Obsolete |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 324-2008
GB/T 324-2008: Weld symbolic representation on drawings---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT324-2008
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 25.160.01
J 33
Replacing GB/T 324-1988
Weld symbolic representation on drawings
(ISO 2553.1992, Welded, brazed and soldered joints -
Symbolic representation on drawings, MOD)
Issued on: JUNE 26, 2008
Implemented on: JANUARY 1, 2009
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People’s Republic of China;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 General ... 5
4 Symbols... 6
5 Positioning rules for the elementary symbols and leading lines ... 9
6 Dimensioning ... 11
Annex A (Informative) Examples of the use of weld symbols ... 14
Foreword
ISO 2553.1992 Welded, brazed and soldered joints -- Symbolic representation
on drawings (English edition) was modified and referenced in this Standard.
Compared with ISO 2553.1992, the major differences are as follows.
— Foreword of the International Standard has been removed;
— ISO 123.1982, ISO 544.1989, ISO 1302.1978, ISO 2560.1973, ISO 3098-
1.1974, ISO 3581.1976, and ISO 8167.1989 have been removed from
the normative references, and GB/T 12212-1990 has been added;
— Several supplementary symbols have been added;
— The dimensioning method has been refined;
— Some examples from the International Standard have been removed.
This Standard is the substitute for GB/T 324-1988 Weld symbolic
representation on drawings.
Compared with GB/T 324-1988, the major changes in this Standard are as
follows.
— The scope of application has been extended to brazed joints;
— 7 basic symbols have been added;
— The original “auxiliary symbols” and “supplemental symbols” are
combined into “supplemental symbols”, in which a smooth blending
symbol is added; and the original backing strip is subdivided into
permanent backing strip and removable backing strip;
— The example section has been adapted to practical and concise
principles.
Annex A of this Standard is an informative annex.
This Standard was proposed by and shall be under the jurisdiction of the
National Technical Committee for Standardization of Welding.
Drafting organizations of this Standard. Harbin Welding Research Institute,
Beijing Electric Power Construction Co., Ltd, and Lanzhou LS Machinery
Equipment Co., Ltd.
Main drafters of this Standard. Piao Dongguang, Ren Yongning, and Lei
Wanqing.
Weld symbolic representation on drawings
1 Scope
This Standard specifies the rules for weld symbolic representation.
This Standard applies to the symbolic labeling of welded joints.
2 Normative references
The provisions in the following documents become the provisions of this
Standard through reference in this Standard. For dated references, the
subsequent amendments (excluding corrections) or revisions do not apply to
this Standard. However, parties who reach an agreement based on this
Standard are encouraged to study if the latest editions of these documents are
applicable. For undated references, the latest editions apply to this Standard.
GB/T 5185 Welding and allied processes -- Nomenclature of processes and
reference numbers (GB/T 5185-2005, ISO 4063.1998, IDT)
GB/T 12212 Technical drawings -- Dimensions, proportions and simplified
representation for welding symbols
GB/T 16672 Welds -- Working positions -- Definitions of angles of slope and
rotation (GB/T 16672-1996, idt ISO 6947.1993)
GB/T 19418 Arc-welded joints in steel -- Guidance on quality levels for
imperfections (GB/T 19418-2003, ISO 5817.1992, IDT)
3 General
Weld symbols are recommended when welds or joints are required on technical
drawings or documents. If necessary, it may also be indicated with the general
recommendations for technical drawings.
The symbolic representation shall clearly give all necessary indications
regarding the specific weld to be obtained without over-burdening the drawing
with notes.
Complete weld symbols include elementary symbols, leading lines,
supplementary symbols, dimension symbols and data. For simplification, the
elementary symbols and leading lines are usually only used when marking
joint”, and the opposite side refers to “other side of the joint”, as shown in Figure
2.
Figure 2 -- Examples of “arrow side” and “other side” of the joint
5.2.2 Reference line
The reference line shall preferably be drawn parallel to the bottom edge of the
drawing, or if necessary perpendicular.
The positions of the continuous and dashed lines can be interchanged as
needed.
5.3 Position of the elementary symbol with regard to the reference line
— When the elementary symbol is placed on the continuous line side, it
indicates to be welded on the arrow side, as shown in Figure 3a);
— When the elementary symbol is placed on the dashed line side, it
indicates to be welded on the other side, as shown in Figure 3b);
— Symmetrical welds allow for the omission of dashed lines, as shown in
Figure 3c);
— In the case of a clear distribution of the weld location, some double-sided
welds may also allow for the omission of dashed lines, as shown in Figure
3d).
a) To be welded on the arrow side of the joint
Joint A
Joint B
Arrow line
Arrow lineArrow line
Arrow line
Other side of joint A Other side of joint A
Other side of joint B
Other side of joint B
Arrow side of joint A
Arrow side of joint A
Arrow side of joint B
Arrow side of joint BJo
int
Jo
int
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 324-2008 be delivered?Answer: The full copy PDF of English version of GB/T 324-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 324-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 324-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 324-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. Question 5: Should I purchase the latest version GB/T 324-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 324-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. How to buy and download a true PDF of English version of GB/T 324-2008?A step-by-step guide to download PDF of GB/T 324-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 324-2008".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|