|
Std ID |
Description (Standard Title) |
|
GB/T 10072-1988
|
Specifications of electronic flash equipments for photograph
|
|
GB/T 14977-1994
|
General requirement of surface finish for hot rolled steel plates
|
|
GB/T 14977-2008
|
General requirement for surface condition of hot-rolled steel plates
|
|
GB/T 14978-1994
|
Continual hot-dip aluminium zinc silicon alloy coated steel strips and sheets
|
|
GB/T 10072-2003
|
Specifications of electronic flash equipment for photograph
|
|
GB/T 14979-1994
|
Eutectic carbide of steel. Micrographic method using standard diagrams
|
|
GB/T 14980-1994
|
Major diameter welded steel pipe for lowpressure liquid service
|
|
GB/T 14981-1994
|
Dimenisions shape weight and tolerances for hot-rolled wire rods
|
|
GB/T 14981-2004
|
Dimensions, shape, mass and tolerances for hot-rolled wire rods
|
|
GB/T 10073-1996
|
Methods of evaluation for image quality of electrostatic copies [including MODIFICATION 1]
|
|
GB/T 14982-1994
|
Fireclay refractory mortars
|
|
GB/T 10073-2008
|
Methods of evaluation for image quality of electrostatic copes
|
|
GB/T 14983-1994
|
Test method for alkali-resistance of refractories
|
|
GB/T 14983-2008
|
Refractory products -- Determination of alkali-resistance
|
|
GB/T 14984.1-2010
|
Ferroalloys -- Vocabulary -- Part 1: Materials
|
|
GB/T 14984.2-2010
|
Ferroalloys -- Vocabulary -- Part 2: Sampling and sample preparation
|
|
GB/T 14984.3-2010
|
Ferroalloys -- Vocabulary -- Part 3: Sieve analysis
|
|
GB/T 14984-1994
|
Ferroalloys- Vocabulary
|
|
GB/T 14985-1994
|
General rules of dimensions, shape, surface quality, test mothod and inspection for expansion alloys
|
|
GB/T 14985-2007
|
General rules of dimensions, shape, surface, quality, testing method and inspection for expansion alloys
|
|
GB/T 14986-1994
|
Corrosion-resisting soft magnetic alloys technical requirements
|
|
GB/T 14986-2008
|
High saturation magnetic induction, magnetic compensate alloys depending on temperature variation, corrosion-resisting, iron-aluminium, Permanent permeability, soft magnetic alloys
|
|
GB/T 14987-1994
|
High permability alloys with high hardness and high electrical resistance
|
|
GB/T 10077-1988
|
Maximum outside size and capacity series for lithium battery
|
|
GB/T 14988-1994
|
Cold-rolled strips for hysteresis alloys
|
|
GB/T 14988-2008
|
Hysteresis alloy
|
|
GB/T 14989-1994
|
Iron-cobalt-vanadium permanent-magnet alloys
|
|
GB/T 10077-2008
|
Classification, designation nomenclature and basic specifications for lithium primary batteries
|
|
GB/T 1499.3-2002
|
Welded steel fabric for the reinforcement of concrete
|
|
GB/T 10079-1988
|
Enclosed single-stage reciprocating refrigerant compressors
|
|
GB/T 14990-1994
|
Hot rolled (or forged) bars for iron-cobalt-molybdenum hysteresis alloys
|
|
GB/T 14991-1994
|
Deformable permanent-magnet steels
|
|
GB/T 10079-2001
|
Single stage reciprocating refrigerant compressors
|
|
GB/T 14992-1994
|
Types of heat-resisting superalloys
|
|
GB/T 14992-2005
|
Classification and designation for superalloys and high temperature intermetallic materials
|
|
GB/T 14993-1994
|
Hot-rolled heat-resisting superalloy bars for rotating parts
|
|
GB/T 14993-2008
|
Hot-rolled superalloy bars for rotating parts
|
|
GB/T 14994-1994
|
Cold brawn heat-resisting superalloy bars
|
|
GB/T 14994-2008
|
Superalloy cold drawn bars
|
|
GB/T 14995-1994
|
Hot-rolled heat-resisting superalloy plates
|
|
GB/T 14995-2010
|
Hot-rolled superalloy sheets
|
|
GB/T 14996-1994
|
Cold-rolled heat-resisting superalloy sheets
|
|
GB/T 14996-2010
|
Cold-rolled heat-resisting superalloy sheets
|
|
GB/T 14997-1994
|
Forged heat-resisting superalloy disks
|
|
GB/T 14998-1994
|
Heat-resisting superalloy blanks for forged rings
|
|
GB/T 14999.1-1994
|
Methods of acid etch test for longitudinal macro-structures of heat-resisting superalloy bars
|
|
GB/T 14999.1-2012
|
Test method for super alloys -- Part 1: Verification of longitudinal macro-structures and defect by etch
|
|
GB/T 14999.2-1994
|
Methods of acid etch test for transvese macro-structures of heat-resisting superalloys
|
|
GB/T 14999.2-2012
|
Test methods for superalloys -- Part 2: Verification of transverse macro-structures and defect by etch
|
|
GB/T 14999.3-1994
|
Methods of longitudinal fracture test for heat-resisting superalloy bars
|
|
GB/T 14999.3-2012
|
Test methods for superalloys -- Part 3: Verification of longitudinal fracture of bars
|
|
GB/T 14999.4-1994
|
Methods of examining micro-structures for heat-resisting superalloys
|
|
GB/T 14999.4-2012
|
Test methods for superalloys -- Part 4: Determination of characterizing banding grains and primary carbides distribution of super alloy rolling
|
|
GB/T 14999.5-1994
|
Photomicrographs and photomacrographs for evaluating of heat-resisting superalloys
|
|
GB/T 14999.6-2010
|
Test methods for characterizing duplex grain sizes and primary carbides distribution of superalloy forgings
|
|
GB/T 14999.7-2010
|
Test methods for grain sizes, primary dendrite spacing and micro-shrinkage of superalloy castings
|
|
GB/T 14999-1994
|
Macroscopic and microscopic testing methods and grading figure for heat-resisting superalloys
|
|
GB/T 15000.1-1994
|
Directives for the work of reference materials (1). General rules for description of reference materials in technical standards
|
|
GB/T 15000.2-1994
|
Directives for the work of reference materials (2). The common terms and definitions of reference materials
|
|
GB/T 15000.3-1994
|
Directives for the work of reference materiapls (3). General principles and statistic methods for certification of reference materials
|
|
GB/T 15000.3-2008
|
Directives for the work of reference materials -- Reference materials -- General and statistical principles for certification
|
|
GB/T 15000.4-1994
|
Directives for the work of reference materiapls (4). Stipulation of contents for certificate of certified reference materials
|
|
GB/T 15000.4-2003
|
Directives for work of reference materials (4) -- Contents of certificates and labels
|
|
GB/T 15000.5-1994
|
Directives for the work of reference materiapls (5). Technologic rules for reference materials of chemical composition
|
|
GB/T 15000.6-1996
|
Direetivos for the work of reference materials(6). General rules for package of certiffied reference materials
|
|
GB/T 15000.7-1997
|
Directives for the work of reference materials (7). Quality system for the production of reference materials
|
|
GB/T 15000.7-2001
|
Standard work of reference (7) General Requirements of the ability of reference material producers
|
|
GB/T 15000.7-2012
|
Directives for the work of reference materials (7) -- General requirements for the competence of reference material producers
|
|
GB/T 15000.8-2003
|
Directives for the work of reference materials (8) -- Uses of certified reference materials
|
|
GB/T 15000.9-2004
|
Directives for the work of reference materials (9) -- Calibration in analytical chemistry and use of certified reference materials
|
|
GB/T 15001-1994
|
General rules of dimensions, shape, surface quality, test method and inspection for soft magnetic alloys
|
|
GB/T 1500-1987
|
Programming languages ALGOL 60
|
|
GB/T 15002-1994
|
High saturation intensity of magnetization soft magnetic alloys technical requirements
|
|
GB/T 15003-1994
|
Permanent permeability alloys technical requirements
|
|
GB/T 15004-1994
|
Iron-aluminium soft magnetic alloys technical requirements
|
|
GB/T 15005-1994
|
Magnetic compensate alloys depending on temperature variation technical requirements
|
|
GB/T 15006-1994
|
General rules of dimensions, shape, surface quality, test method and inspection for elastic alloys
|
|
GB/T 15006-2009
|
General rules of dimensions, shape, surface quality, test method and inspection for elastic alloys
|
|
GB/T 15007-1994
|
Designations of corrosion-resisting alloy
|
|
GB/T 15007-2008
|
Designations of corrosion-resisting alloy
|
|
GB/T 15008-1994
|
Corrosion-resisting alloy bars
|
|
GB/T 15008-2008
|
Corrosion-resisting alloy bars
|
|
GB/T 15009-1994
|
Hot-rolled plates of corrosion-resisting
|
|
GB/T 15010-1994
|
Cold-rolled sheets of corrosion-resisting
|
|
GB/T 15011-1994
|
Cold-rolled(drawn)seamless tubes of corrosion-resisting alloy
|
|
GB/T 15012-1994
|
Cold-rolled strips of corrosion-resisting alloy
|
|
GB/T 15013-1994
|
Magnetic characters and magnetic values terms definitions for procision allogs
|
|
GB/T 15014-1994
|
Physical characters and physical values terms definitions fo rprocision alloys
|
|
GB/T 15014-2008
|
Physical quantity terminologies and definitions of elastic alloy, expansion alloy, thermostat metal, resistance alloy
|
|
GB/T 15015-1994
|
Physical characters and physical values terms definitions for expansion alloys
|
|
GB/T 15016-1994
|
Physical characters and physical values terms definitions for thermostatic bimetals
|
|
GB/T 15017-1994
|
Physical characters and physical values terms definitions for electric resistance alloys
|
|
GB/T 15018-1994
|
Designation of precision alloys
|
|
GB/T 15019-1994
|
Designation and classification of rapidly quenched metals
|
|
GB/T 15019-2003
|
Designation and classification of rapidly quenched metals
|
|
GB/T 15020-1994
|
Quartz crystal units for use in electronic equipment. Bland detail specification for. Resistance welded quartz crystal units. Assessment level E
|
|
GB/T 15021-1994
|
Micrographics rules for microfilming technical drawings and technical documentations on 35mm roll film
|
|
GB/T 15022.1-2009
|
Resin based reactive compounds used for electrical insulation -- Part 1: Definitions and general requirements
|
|
GB/T 15022.2-2007
|
Resin based reactive compounds used for electrical insulation -- Part 2: Methods of test
|
|
GB/T 15022.3-2011
|
Resin based reactive compounds used for electrical insulation -- Part 3: Unfilled epoxy resinous compounds
|