|
Std ID |
Description (Standard Title) |
|
GB/T 14048.10-2016
|
Low-voltage switchgear and controlgear -- Part 5-2: Control circuit devices and switching elements -- Proximity switches
|
|
GB/T 14048.11-2002
|
Low-voltage switchgear and control equipment -- Part 6: Multi-function electrical 1: Automatic Transfer Switching Equipment
|
|
GB/T 14048.11-2008
|
Low-voltage switchgear and controlgear -- Part 6-1: Multiple function equipment -- Transfer switching equipment
|
|
GB/T 10067.1-1988
|
Basic specifications for electroheat installations--General
|
|
GB/T 14048.1-1993
|
General rules for low-voltage switchgear and controlgear
|
|
GB/T 14048.1-2000
|
Low-voltage switchgear and control equipment General Provisions
|
|
GB/T 14048.12-2006
|
Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters -- AC semiconductor controllers and contactors for non-motor loads
|
|
GB/T 14048.12-2016
|
Low-voltage switchgear and controlgear -- Part 4-3: Contactors and motor-starters -- AC semiconductor controllers and contactors for non-motor loads
|
|
GB/T 14048.13-2006
|
Low-voltage switchgear and controlgear -- Part 5-3: Control circuit devices and switching elements -- Requirements for proximity devices with defined behaviour under fault conditions (PDF)
|
|
GB/T 14048.14-2006
|
Low-voltage switchgear and controlgear -- Part 5-5: Control circuit devices and switching elements -- Electrical emergency stop device with mechanical latching function
|
|
GB/T 14048.15-2006
|
Low-voltage switchgear and controlgear -- Part 5-6: Control circuit devices and switching elements -- DC interface for proximity sensors and switching amplifiers (NAMUR)
|
|
GB/T 14048.16-2006
|
Low-voltage switchgear and controlgear -- Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
|
|
GB/T 14048.16-2016
|
Low-voltage switchgear and controlgear -- Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
|
|
GB/T 14048.17-2008
|
Low-voltage switchgear and controlgear -- Part 5-4: Control circuit devices and switching elements -- Method of assessing the performance of low-energy contacts -- Special tests
|
|
GB/T 14048.18-2008
|
Low-voltage switchgear and controlgear -- Part 7-3: Ancillary equipment -- Safety requirements for fuse terminal blocks
|
|
GB/T 14048.18-2016
|
Low-voltage switchgear and controlgear -- Part 7-3: Ancillary equipment -- Safety requirements for fuse terminal blocks
|
|
GB/T 14048.19-2013
|
Low-voltage switchgear and controlgear -- Part 5-7: Control circuit devices and switching elements -- Requirements for proximity devices with analogue output
|
|
GB/T 14048.20-2013
|
Low-voltage switchgear and controlgear -- Part 5-8: Control circuit devices and switching elements -- Three-position enabling switches
|
|
GB/T 14048.21-2013
|
Low-voltage switchgear and controlgear -- Part 5-9: Control circuit devices and switching elements -- Flow rate switches
|
|
GB/T 14048.6-2016
|
Low-voltage switchgear and controlgear -- Part 4-2: Contactors and motor-starters -- AC semiconductor motor controllers and starters (including soft-starters)
|
|
GB/T 14048.7-2006
|
Low-voltage switchgear and controlgear -- Part 7-1: Ancillary equipment -- Terminal blocks for copper conductors
|
|
GB/T 14048.7-2016
|
Low-voltage switchgear and controlgear -- Part 7-1: Ancillary equipment -- Terminal blocks for copper conductors
|
|
GB/T 14048.8-2006
|
Low-voltage switchgear and controlgear -- Part 7-2: Ancillary equipment -- Protective conductor terminal blocks for copper conductors
|
|
GB/T 14048.8-2016
|
Low-voltage switchgear and controlgear -- Part 7-2: Ancillary equipment -- Protective conductor terminal blocks for copper conductors
|
|
GB/T 14049-2008
|
Aerial insulated cables for rated voltage of 10kV
|
|
GB/T 14053-1993
|
Dosimetry of X and γ reference radiations for radiation protection over the energy range from 8 keV to 1.3 MeV
|
|
GB/T 14054-1993
|
Installed X or gamma radiation doserate meters, warning assemblies and monitors for use in radiation protection
|
|
GB/T 14054-2013
|
Radiation protection instrumentation -- Installed dose rate meters, warning assemblies and monitors for X and gamma radiation of energy between 50 keV and 7 MeV
|
|
GB/T 14055.1-2008
|
Reference neutron radiations -- Part 1: Characteristics and methods of production
|
|
GB/T 14055.2-2012
|
Reference neutron radiations -- Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field
|
|
GB/T 14055-1993
|
Neutron reference radiations for calibration neutron-measuring devices used for radiation protection purposes and for determining their response as a function of neutron energy
|
|
GB/T 14056.1-2008
|
Evaluation of surface contamination -- Part 1: Beta-emitters (maximum beta energy greater than 0.15 MeV) and alpha emitters
|
|
GB/T 14056.2-2011
|
Evaluation of surface contamination -- Part 2: Tritium surface contamination
|
|
GB/T 14056-1993
|
Evaluation of surface contamination. Part 1: Beta-emitters (maximum beta energy greater than 0. 15MeV)and alpha-emitters
|
|
GB/T 14057.1-2008
|
Decontamination of radioactively contaminated surfaces -- Part 1: Method for testing and assessing the ease of decontamination
|
|
GB/T 14057.2-2011
|
Decontamination of radioactively contaminated surface -- Part 2: Testing method of decontamination agents for textiles
|
|
GB/T 14057-1993
|
Decontamination of radioactivily contaminated surface-Method for testing and assessing the ease of decontamination
|
|
GB/T 14058-1993
|
Apparatus for gamma radiography
|
|
GB/T 14058-2008
|
Apparatus for gamma radiography
|
|
GB/T 14059-1993
|
DDZ-III series process electronic control system. Gurrent converter
|
|
GB/T 1406.1-2008
|
Types and dimensions of lamp caps -- Part 1: Screw caps
|
|
GB/T 1406.2-2008
|
Types and dimensions of lamp caps -- Part 2: Pin lamp caps
|
|
GB/T 1406.3-2008
|
Types and dimensions of lamp caps -- Part 3: Pre-focus caps
|
|
GB/T 1406.4-2008
|
Types and dimensions of lamp caps -- Part 4: Miscellaneous caps
|
|
GB/T 1406.5-2008
|
Types and dimensions of lamp caps -- Part 5: Bayonet caps
|
|
GB/T 14060-1993
|
DDZ-III series process electronic control system Impedance converter
|
|
GB/T 14061-1993
|
DDZ-III series process electronic control system Recording instrument
|
|
GB/T 14062-1993
|
DDZ-III series process electronic control system. Integrating instrument
|
|
GB/T 14063-1993
|
DDZ-III series process electronic control system. Ratio setter
|
|
GB/T 14064-1993
|
DDZ-III series process electronic control system Alarm setter
|
|
GB/T 14065-1993
|
DDZ-III series process electronic control system Safety barrier
|
|
GB/T 14066-1993
|
DDZ-III series process electronic control system. Signal selector
|
|
GB/T 14067-1993
|
DDZ-III series process electronic control system. Signal limiter
|
|
GB/T 14068-1993
|
DDZ-III series process electronic control system Q antomatic/manual station
|
|
GB/T 14069-1993
|
DDZ-III series process electronic control system Stabilizey voltage supply box
|
|
GB/T 14070-1993
|
Gas analysis. Preparation of calibration gas mixtures. Manometric method
|
|
GB/T 14071-1993
|
The standard of examination and approval of improved varieties of forest tree
|
|
GB/T 14072-1993
|
Conservation principle and method of germplasm resources of forest trees
|
|
GB/T 14073-1993
|
Selection and breeding of procedure and request of the main broadleaf trees improved variety
|
|
GB/T 14074.10-1993
|
Testing methods for wood adhesives and their resins - Method for determination of wood glue bond strength
|
|
GB/T 14074.11-1993
|
Testing methods for wood adhesives and their resins - Method for determination of moisture content
|
|
GB/T 14074.1-1993
|
Testing methods for wood adhesives amd their resins - Method for determination of appearance
|
|
GB/T 14074.12-1993
|
Testing methods for wood adhesives and their resins - Method for determination of curing speed
|
|
GB/T 14074.13-1993
|
Testing methods for wood adhesives and their resins - Method for dtermination of free phenol content
|
|
GB/T 14074.14-1993
|
Testing methods for wood adhesives and their resins - Method for determination of brominable substance
|
|
GB/T 14074.15-1993
|
Testing methods for wood adhesives and their resins - Method for determination of alkali content
|
|
GB/T 14074.16-1993
|
Testing methods for wood adhesives and their resins - Method for determination of free formaldehyde content
|
|
GB/T 14074.17-1993
|
Testing methods for wood adhesives and their resins - Method for determination of methylol content
|
|
GB/T 14074.18-1993
|
Testing methods for wood adhesives and their resins - Method for determination of precipitation temperature
|
|
GB/T 14074.2-1993
|
Testing methods for wood adhesives and their resins - Method for determination of density
|
|
GB/T 14074.3-1993
|
Testing methods for wood adhesives and their resins - Method for determination of viscosity
|
|
GB/T 14074.4-1993
|
Testing methods for wood adhesives and their tesins - Method for determination of pH
|
|
GB/T 14074.5-1993
|
Testing methods for wood adhesives and their resins - Method for determination of solid content
|
|
GB/T 14074.6-1993
|
Testing methods for wood adhesives and their resins - Metnod for determination of miscibility with water
|
|
GB/T 14074.7-1993
|
Testing methods for wood adhesives and their resins - Method for determination of gelation time
|
|
GB/T 14074.8-1993
|
Testing methods for wood adhesives and their resins - Method for determination of pot life
|
|
GB/T 14074.9-1993
|
Testing methods for wood adhesives amd their resins - Method for determination of storage stability
|
|
GB/T 14074-2006
|
Test methods for wood adhesives and resins
|
|
GB/T 14075-1993
|
Specifications for optical fiber chromatic dispersion measuring set
|
|
GB/T 14075-2008
|
Specifications for optical fibre chromatic dispersion measuring set
|
|
GB/T 14076-1993
|
General technical requirments of luminaires for film tlevision studios and stage lighting
|
|
GB/T 14077-1993
|
Measurement specification for birefractance crystal and polarizer
|
|
GB/T 14078-1993
|
He-Ne laser specification
|
|
GB/T 14078-2010
|
He-Ne laser specification
|
|
GB/T 14079-1993
|
Guideline on software maintenance
|
|
GB/T 1408.1-1999
|
Methods of test for electric strength of solid insulating materials Tests at power frequencies
|
|
GB/T 1408.1-2006
|
Electrical strength of insulating materials -- Test methods -- Part 1: Tests at power frequencies
|
|
GB/T 1408.1-2016
|
Insulating materials -- Test methods for electric strength -- Part 1: Test at power frequencies
|
|
GB/T 1408.2-2006
|
Electrical strength of insulating materials -- Test methods -- Part 2: Additional requirements for tests using direct voltage
|
|
GB/T 1408.2-2016
|
Insulating materials -- Test methods for electric strength -- Part 2: Additional requirements for tests using direct voltage
|
|
GB/T 1408.3-2007
|
Electric strength of insulating materials -- Test methods -- Part 3: Additional requirements for 1, 2/50μs impulse tests
|
|
GB/T 1408.3-2016
|
Insulating materials -- Test methods for electric strength -- Part 3: Additional requirements for 1.2/50μs impulse tests
|
|
GB/T 14080-1993
|
Generic specification of mini-magnetic head for Winchester disk drive
|
|
GB/T 14080-2010
|
General specification of head stack assembly for hard disk drive
|
|
GB/T 14081-1993
|
Generic specification for English character keyboard for information processing
|
|
GB/T 14081-2010
|
General specification of keyboard for information processing
|
|
GB/T 1408-1989
|
Methods of test for electric strength of solid insulating materials at power frequencies
|
|
GB/T 14082-1993
|
Generic specification of 9-track digital magnetic head for digital magnetic tape unit
|
|
GB/T 14083-1993
|
Generic specification for the Chinese ideograph key board
|
|
GB/T 14084-1993
|
General specification of Chinese and English electronic typewriter for office management
|