GB/T 1406.2-2008 English PDF
Basic dataStandard ID: GB/T 1406.2-2008 (GB/T1406.2-2008)Description (Translated English): Types and dimensions of lamp caps -- Part 2: Pin lamp caps Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K74 Classification of International Standard: 29.140.10 Word Count Estimation: 114,135 Date of Issue: 2008-04-29 Date of Implementation: 2008-12-01 Older Standard (superseded by this standard): GB 2799-2001 Quoted Standard: GB/T 1483.2, GB/T 10682, GB/T 19148.2, GB/T 21092, GB/T 21098 Adopted Standard: IEC 60061-1-2005, MOD Regulation (derived from): Announcement of Newly Approved National Standards No. 6, 2008 (No. 119 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the pin caps of the type and size. This section applies to those specified in this section use the lamp as a light model with accessories lighting product design and production, but also for other lighting product design. GB/T 1406.2-2008: Types and dimensions of lamp caps -- Part 2: Pin lamp caps---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Types and dimentions of lamp caps Part 2. Pin lamp caps ICS 29.140.10 K74 National Standards of People's Republic of China Replacing GB 2799-2001 Lamp type and size Part 2. Pin lamp holder (IEC 60061-1.2005, Lampcapsandholderstogetherwithgaugesforthe controlofinterchangeabilityandsafety-Part 1. Lampcaps, MOD) Posted 2008-04-29 2008-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordGB/T 1406 "cap type and size" is divided into five sections. --- Part 1. screw-on cap; --- Part 2. pin-type lamp; --- Part 3. pre-focus lamp holder; --- Part 4. Miscellaneous Lamp; --- Part 5. bayonet cap. This section GB/T 1406 Part 2. 2005 "lamp holders and the amount of test its safety and interchangeability. This section GB/T 1406 amendments adopted IEC 60061-1 - Part 1. Lamp "(version 3.35) in English. This part of IEC 60061-1.2005 (3.35 version) English version of the section on the type and size of pin-type lamp in technical content On exactly the same. For ease of use, this section also made the following editorial changes. "." --- With a decimal point instead of a comma as the decimal point, ""; --- "This International Standard" be replaced by "this section";2 Normative referencesThe following documents contain provisions which, through reference to GB/T 1406 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 1483.2 Lamp caps Gauges - Part 2. pin-type lamp holder gauge (GB/T 1483.2-2008, IEC 60061-3.2004, Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeability andsafety-Part 3. Gauges, MOD) GB/T 10682 double-ended fluorescent lamps - Performance requirements (GB/T 10682-2002, neqIEC 60081.1997) GB/T 19148.2 lampholder types and dimensions - Part 2. Pin lampholders (GB/T 19148.2-2008, IEC 60061-2. 2004, Lampcapsandholderstogetherwithgaugesforthecontrolofinterchangeabilityandsafety- Part 2. Lampholders, MOD) GB/T 21092 Miscellaneous lamp (GB/T 21092-2007, IEC 61549.2005, IDT) GB/T 21098 Lamp caps and test its safety and interchangeability of gauges - Part 4. Guidelines and general information (GB/T 21098-2007, IEC 60061-4.2004, IDT)3 type and sizeLamp models shall comply with GB/T 21098 of. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1406.2-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 1406.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 1406.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1406.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
