|
Std ID |
Description (Standard Title) |
|
GB/T 25963-2022
|
Determination of aromatic hydrocarbon types in middle distillates containing fatty acid methyl esters - High performance liquid chromatography method with refractive index detection
|
|
GB/T 26081-2022
|
Ductile iron pipes, fittings and accessories for sewerage applications
|
|
GB/T 26237.10-2022
|
Information technology - Biometric data interchange formats - Part 10: Hand geometry silhouette data
|
|
GB/T 26237.1-2022
|
Information technology - Biometric data interchange formats - Part 1: Framework
|
|
GB/T 26237.15-2022
|
Information technology - Biometric data interchange formats - Part 15: Palm crease image data
|
|
GB/T 26237.8-2022
|
Information technology - Biometric data interchange formats - Part 8: Finger pattern skeletal data
|
|
GB/T 26332.5-2022
|
Optics and photonics - Optical coatings - Part 5: Minimum requirements for antireflecting coatings
|
|
GB/T 26332.6-2022
|
Optics and photonics - Optical coatings - Part 6: Minimum requirements for reflecting coatings
|
|
GB/T 26332.7-2022
|
Optics and photonics - Optical coatings - Part 7: Minimum requirements for neutral beam splitter coatings
|
|
GB/T 26332.8-2022
|
Optics and photonics - Optical coatings - Part 8: Minimum requirements for coatings used for laser optics
|
|
GB/T 2650-2022
|
Destructive tests on welds in metallic materials - Impact tests
|
|
GB/T 2652-2022
|
Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
|
|
GB/T 26540-2022
|
Metal network composite insulation board for wall insulation and finish systems
|
|
GB/T 26698-2022
|
Pencils and mechanical pencils for exam
|
|
GB/T 26699-2022
|
Ball pens for exam
|
|
GB/T 26704-2022
|
Pencils
|
|
GB/T 26719-2022
|
General rules for water statistics in water-use organization
|
|
GB/T 26866-2022
|
Testing specifications of power time synchronism systems
|
|
GB/T 26899-2022
|
Structural glued laminated timber
|
|
GB/T 26957-2022
|
Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints
|
|
GB/T 27428-2022
|
General requirements for plant biosafety laboratory
|
|
GB/T 2766-2022
|
Surgical instruments - Non-cutting, articulated instruments - General requirements and test methods
|
|
GB/T 2794-2022
|
Determination for viscosity of adhesives
|
|
GB/T 28567-2022
|
Technical requirements for special equipment of electric wire and cable
|
|
GB/T 28826.4-2022
|
Information technology - Common biometric exchange formats framework - Part 4: Security block format specifications
|
|
GB/T 28827.1-2022
|
Information technology service - Operations and maintenance - Part 1: General requirements
|
|
GB/T 28827.7-2022
|
Information technology service - Operations and maintenance - Part 7: Cost measurement specification
|
|
GB/T 28827.8-2022
|
[Including 2024XG1] Information technology service - Operations and maintenance - Part 8: Hospital information system management requirements
|
|
GB/T 28879-2022
|
Nomenclature of model for electrotechnical instruments
|
|
GB/T 28900-2022
|
Test methods of steel for reinforcement of concrete
|
|
GB/T 28905-2022
|
Low yield strength steel plate for construction
|
|
GB/T 2900.19-2022
|
Electrotechnical terminology - High-voltage test technique and insulation co-ordination
|
|
GB/T 29268.5-2022
|
Information technology - Biometric performance testing and reporting - Part 5: Access control scenario and grading scheme
|
|
GB/T 29268.6-2022
|
Information technology - Biometric performance testing and reporting - Part 6: Testing methodologies for operational evaluation
|
|
GB/T 29312-2022
|
Low-voltage reactive power compensation switching component
|
|
GB/T 30007-2022
|
Ships and marine technology - Guidelines for the assessment of speed and power performance by analysis of speed trial data
|
|
GB/T 30370-2022
|
Guide of primary frequency control test and performance acceptance for thermal power generating units
|
|
GB/T 30661.6-2022
|
Wheelchair seating - Part 6: Simulated use and determination of the changes in properties of seat cushions
|
|
GB/T 30834-2022
|
Rating and classifying of inclusions in steel - Scanning electron microscope method
|
|
GB/T 30966.1-2022
|
Wind energy generation systems - Communications for monitoring and control of wind power plants - Part 1: Overall description of principles and models
|
|
GB/T 30966.2-2022
|
Wind energy generation systems - Communications for monitoring and control of wind power plants - Part 2: Information models
|
|
GB/T 30966.3-2022
|
Wind energy generation systems - Communications for monitoring and control of wind power plants - Part 3: Information exchange models
|
|
GB/T 30966.5-2022
|
Wind energy generation systems - Communications for monitoring and control of wind power plants - Part 5: Compliance testing
|
|
GB/T 30966.6-2022
|
Wind energy generation systems - Communications for monitoring and control of wind power plants - Part 6: Logical node classes and data classes for condition monitoring
|
|
GB/T 31138-2022
|
Hydrogen dispensers
|
|
GB/T 31517.1-2022
|
Fixed offshore wind turbines - Design requirements
|
|
GB/T 32070-2022
|
Earth-moving machinery - Object detection systems and visibility aids - Performance requirements and tests
|
|
GB/T 32561.4-2022
|
Measuring methods for chalcogenide infrared optical glass - Part 4: Coefficient of optical absorption
|
|
GB/T 32561.5-2022
|
Measuring methods for chalcogenide infrared optical glass - Part 5: Stress birefringence
|
|
GB/T 32877-2022
|
Specific test methods for determining losses and efficiency of converter-fed AC motors
|
|
GB/T 33356-2022
|
Evaluation indicators for new-type smart cities
|
|
GB/T 34315.1-2022
|
Small craft - Inflatable liferafts - Part 1: Type I
|
|
GB/T 3452.5-2022
|
O-rings for fluid power systems - Part 5: Specification of elastomeric materials
|
|
GB/T 34680.5-2022
|
Evaluation model and general indicator system for smart cities - Part 5: Traffic
|
|
GB/T 3488.4-2022
|
Hardmetals - Metallographic determination of microstructure - Part 4: Characterisation of porosity, carbon defects and eta-phase content
|
|
GB/T 35031.302-2022
|
Customer energy management system - Part 3-2: Data configuration of subsystem gateway
|
|
GB/T 35031.4-2022
|
Customer energy management system - Part 4: Specification for information exchange between hot and gateways
|
|
GB/T 3517-2022
|
Rubber, raw natural - Determination of plasticity retention index (PRI)
|
|
GB/T 35596-2022
|
Heat resistant blowed from borosilicate glass
|
|
GB/T 35598-2022
|
Heat resistant appliance pressed from borosilicate glass
|
|
GB/T 3565.1-2022
|
Safety requirements for bicycles - Part 1: Terms and definitions
|
|
GB/T 35770-2022
|
Compliance management systems - Requirements with guidance for use
|
|
GB/T 36148.3-2022
|
Ships and marine technology - Marine environment protection - Oil booms - Part 3: End connectors
|
|
GB/T 3621-2022
|
Titanium and titanium alloy plate and sheet
|
|
GB/T 3655-2022
|
Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of an epstein frame
|
|
GB/T 3656-2022
|
Methods of coercivity measurement of magnetic iron and magnetically soft alloy by pulling out procedure
|
|
GB/T 3658-2022
|
Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
|
|
GB/T 36917.3-2022
|
Dentistry - Laboratory cutters - Part 3: Carbide cutters for milling machines
|
|
GB/T 36917.4-2022
|
Dentistry - Laboratory cutters - Part 4: Miniature carbide laboratory cutters
|
|
GB/T 37141.1-2022
|
Guide to UV imaging detection of electrical equipment in high altitude regions - Part 1: Substations
|
|
GB/T 37400.17-2022
|
Heavy mechanical general technical specification - Part 17: Repair welding for steel forging
|
|
GB/T 37770.1-2022
|
Refrigerated light hydrocarbon fluids - General requirements for automatic tank gauges - Part 1: Automatic tank gauges for liquefied natural gas marine floating storage
|
|
GB/T 38265.17-2022
|
Test methods for soft soldering fluxes - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues
|
|
GB/T 38265.3-2022
|
Test methods for soft soldering fluxes - Part 3: Determination of acid value - Potentiometric and visual titration methods
|
|
GB/T 38265.6-2022
|
Test methods for soft soldering fluxes - Part 6: Determination of halide(excluding fluoride) content
|
|
GB/T 38265.8-2022
|
Test methods for soft soldering fluxes - Part 8: Determination of zinc content
|
|
GB/T 38265.9-2022
|
Test methods for soft soldering fluxes - Part 9: Determination of ammonia content
|
|
GB/T 3836.11-2022
|
Explosive atmospheres - Part 11: Material characteristics for gas and vapour classification - Test methods and data
|
|
GB/T 3836.16-2022
|
Explosive atmospheres - Part 16: Electrical installations inspection and maintenance
|
|
GB/T 3836.21-2022
|
Explosive atmospheres - Part 21: Application of quality management systems for Ex Product manufacture
|
|
GB/T 3836.36-2022
|
Explosive atmospheres - Part 36: Electrical safety devices for the control of potential ignition sources from Ex Equipment
|
|
GB/T 38659.3-2022
|
Electromagnetic compatibility - Risk assessment - Part 3: Risk analysis method for device
|
|
GB/T 38659.4-2022
|
Electromagnetic compatibility - Risk assessment - Part 4: Risk analysis method for system
|
|
GB/T 38664.4-2022
|
Information technology - Big data - Government data opening and sharing - Part 4: Evaluation for sharing
|
|
GB/T 3883.215-2022
|
Safety of motor-operated hand-held, transportable and garden tools - Part 215: Particular requirements for hand-held mixers
|
|
GB/T 3903.29-2022
|
Footwear - Test methods for outsoles - Determination of split tear strength and delamination resistance
|
|
GB/T 3903.32-2022
|
Footwear - Test methods for insoles - Resistance to stitch tear
|
|
GB/T 3903.8-2022
|
Footwear - Test methods for insoles - Delamination resistance
|
|
GB/T 39141.3-2022
|
Mineral and sapphire watch-glasses - Part 3: Qualitative criteria and test methods
|
|
GB/T 39380.2-2022
|
Chlorinated poly (vinyl chloride)(PVC-C) piping system for fire sprinkler installations - Part 2: Fittings
|
|
GB/T 397-2022
|
Commercial coal quality - Coal for coke making
|
|
GB/T 40694.4-2022
|
Information technology - Pictograms, icons and symbols used in biometrics systems - Part 4: Fingerprint applications
|
|
GB/T 40694.5-2022
|
Information technology - Pictograms, icons and symbols for use with biometric systems - Part 5: Face applications
|
|
GB/T 40694.9-2022
|
Information technology - Pictograms, icons and symbols for use with biometric systems - Part 9: Vascular applications
|
|
GB/T 40778.3-2022
|
Internet of things - Web-oriented open service system implementation - Part 3: Thing discovery method
|
|
GB/T 40783.2-2022
|
Information technology - Telecommunications and information exchange between systems - Magnetic field area network(MFAN) - Part 2: In-band control protocol for wireless power transfer
|
|
GB/T 40887.2-2022
|
Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 2: Systems for forward-facing wheelchair seated passengers
|
|
GB/T 40905.2-2022
|
Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Part 2: Scanning electron microscopy method
|
|
GB/T 4096.1-2022
|
Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes
|
|
GB/T 4096.2-2022
|
Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing
|