GB/T 38265.9-2022 English PDFUS$239.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 38265.9-2022: Test methods for soft soldering fluxes - Part 9: Determination of ammonia content Status: Valid
Basic dataStandard ID: GB/T 38265.9-2022 (GB/T38265.9-2022)Description (Translated English): Test methods for soft soldering fluxes - Part 9: Determination of ammonia content Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J33 Classification of International Standard: 25.160.50 Word Count Estimation: 11,121 Date of Issue: 2022-10-12 Date of Implementation: 2022-10-12 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 38265.9-2022: Test methods for soft soldering fluxes - Part 9: Determination of ammonia content---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Test methods for soft soldering fluxes - Part 9.Determination of ammonia content ICS 25.160.50 CCSJ33 National Standards of People's Republic of China Soldering Flux Test Method Part 9.Determination of ammonia content (ISO 9455-9.2020, Softsolderingfluxes-Testmethods-Part 9. Released on 2022-10-12 2022-10-12 implementation State Administration for Market Regulation Released by the National Standardization Management Committee table of contentsPreface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Principle 1 5 Reagent 1 6 Instruments and equipment 2 7 Test Step 3 8 Experimental data processing 3 9 Precision 4 10 Test report 4 Appendix A (informative) Comparison between this document and ISO 9455-9.2020 structure number 5 Reference 6forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules for Standardization Documents" drafting. This document is Part 9 of GB/T 38265 "Test Methods for Solder Flux". GB/T 38265 has released the following parts. --- Part 1.Gravimetric method for the determination of non-volatile matter content; --- Part 2.Determination of non-volatile matter content boiling point method; --- Part 3.Determination of acid value Potentiometric titration and visual titration; --- Part 5.Copper mirror test; --- Part 6.Determination of content of halides (excluding fluorides); --- Part 8.Determination of zinc content; --- Part 9.Determination of ammonia content; --- Part 10.Solder wetting performance spreading test method; --- Part 11.Solubility of flux residues; --- Part 13.Determination of flux splashing; --- Part 14.Evaluation of the adhesiveness of flux residues; --- Part 15.Copper corrosion test; --- Part 16.Solder wetting performance Wetting balance method; --- Part 17.Flux residue surface insulation resistance comb test and electrochemical migration test. This document is modified to adopt ISO 9455-9.2020 "Test methods for soldering flux - Part 9.Determination of ammonia content". Compared with ISO 9455-9.2020, this document has more structural adjustments. The structure number changes between the two documents are compared in the list See Appendix A. The technical differences between this document and ISO 9455-9.2020 and their reasons are as follows. --- Changed the calibration method of the reagent "sodium hydroxide solution (1.0mol/L)" (see 5.3) to adapt to the technical conditions of our country; --- Changed the calibration method of the reagent "sulfuric acid solution (0.5mol/L)" (see 5.4) to adapt to the technical conditions of our country; --- Changed the expression and preparation process of the reagent "methyl orange indicator solution (1g/L)" (see 5.5) to adapt to the technical conditions of our country; --- Increase the reference to GB/T 6379.2 (see Chapter 9) to adapt to my country's technical conditions and increase operability. The following editorial changes have been made to this document. --- In order to coordinate with the existing standards, the name of the standard was changed to "Test methods for soldering flux Part 9.Determination of ammonia content"; --- Replaced ISO 9454-1 with the informative referenced GB/T 15829 (see Chapter 1). This document is proposed and managed by the National Welding Standardization Technical Committee (SAC/TC55). This document is drafted by. Shaoxing Tianlong Tin Materials Co., Ltd., Harbin Welding Research Institute Co., Ltd., Zhejiang Yatong Welding Materials Co., Ltd., Xiamen Jiyu Solder Co., Ltd., Zhengzhou Machinery Research Institute Co., Ltd., Harbin Institute of Technology. The main drafters of this document. Dai Dengfeng, He Peng, Liu Ping, Wang Shaohua, Zhong Sujuan, Ma Yiming, Sun Xiaomei, Lu Xiaochun.IntroductionAs the key supporting combination material in the soldering process, soldering agent has a decisive influence on the quality of soldered joints. The strong foundation project being implemented, the national science and technology major project "core electronic devices, high-end general-purpose chips and basic software products" and "ultra-large-scale Technology research and development of core electronic devices, high-end chips and integrated circuit complete sets of technology in the Special Project of Modular Integrated Circuit Manufacturing Equipment and Complete Processes Among them, solder is the key basic material, and the formulation of test method standards for its quality performance evaluation is of great significance. Since.2001, my country has promulgated and implemented GB/T 3131 "Sn-Lead Solder", GB/T 20422 "Lead-Free Solder", GB/T 15829 "Classification and Performance Requirements of Solder Fluxes" and GB/T 28770 "Test Methods for Solder Materials" and other supporting standards, solder As an important component of solder, solder not only has an important impact on the solderability and manufacturability of solder, but also affects the environment, the reliability of solder joints and And application is also very important. GB/T 38265 "Test Methods for Soldering Fluxes" is the general test method standard for soldering fluxes. It is proposed to be composed of the following parts constitute. --- Part 1.Gravimetric method for the determination of non-volatile matter content. The purpose is to specify the use of gravimetric method to determine the non-volatile Test method for substance content. --- Part 2.Determination of non-volatile matter content Boiling point method. The purpose is to stipulate the determination of the non-volatile oil in solder by the boiling point method. Test method for substance content. --- Part 3.Determination of acid value potentiometric titration and visual titration. The purpose is to specify the use of potentiometric titration and visual titration Standard test method for the determination of acid value in solder. --- Part 5.Copper mirror test. The purpose of this specification is to specify a test method for evaluating the aggressiveness of solder to copper by means of the copper mirror test. --- Part 6.Determination of halide (excluding fluoride) content. The purpose is to specify the use of three quantitative methods for the determination of solder flux Ionic Halide Content and a Qualitative Method Test Method for the Presence of Ionic Halides in Solder Fluxes. --- Part 8.Determination of zinc content. The purpose is to specify the test for the determination of zinc content in soldering flux by EDTA titration method method. --- Part 9.Determination of ammonia content. The purpose of this document is to specify a test method for the determination of ammonia content in solder fluxes by distillation. --- Part 10.Solder wetting performance spreading test method. The purpose is to specify the use of spreading method to evaluate the wetting performance of solder test method. --- Part 11.Solubility of flux residues. The purpose is to specify a qualitative method for the evaluation of solder residues in selected solvents Solubility test method. --- Part 13.Determination of flux splashing. Its purpose is to specify a test method for evaluating the spattering properties of solder fluxes on steel test pieces. --- Part 14.Evaluation of the adhesiveness of flux residues. The purpose is to specify the use of chalk powder for the evaluation of residues after soldering after soldering. Adhesive test method. --- Part 15.Copper corrosion test. The purpose is to specify the qualitative evaluation of the surface of copper plates using the copper corrosion test under controlled environmental conditions. Test method for corrosivity of solder residues. --- Part 16.Solder wetting properties Wetting balance method. The purpose is to specify the use of wetting balance method to evaluate the wettability of solder capable test method. --- Part 17.Flux residue surface insulation resistance comb test and electrochemical migration test. The purpose is to specify the use of surface Insulation resistance comb test and electrochemical migration test to evaluate the corrosion of flux residues on the surface of the test piece after soldering method. Soldering Flux Test Method Part 9.Determination of ammonia content1 ScopeThis document specifies the method for the determination of ammonia content in solid, paste or liquid solder by distillation, including principles, reagents, instruments and equipment, test methods Test steps, test data processing, precision, test report, etc. This document applies to type 311 and 321 solder fluxes defined in GB/T 15829.2 Normative referencesThe contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document. GB/T 6379.2 Accuracy of measurement methods and results (trueness and precision) - Part 2.Determination of repeatability of standard measurement methods Basic methods of reliability and reproducibility (GB/T 6379.2-2004, ISO 5725-2.1994, IDT)3 Terms and DefinitionsThis document does not have terms and definitions that need to be defined.4 principlesDistill the prepared soldering flux test solution and the sodium hydroxide solution simultaneously to discharge the ammonia present in the soldering flux. resulting distillation Put the substance into the standard sulfuric acid solution, then titrate the excess acid with sodium hydroxide solution, and calculate the ammonia content in the solder.5 reagentsUnless otherwise specified, use only reagents and distilled or deionized water that are confirmed to be of analytical grade. 5.1 Sulfuric acid solution (1 1) Caution. This step is potentially dangerous and should be performed by professionally trained personnel. Using appropriate safety measures, slowly inject 500mL of sulfuric acid (1.84g/mL) into 500mL of water and mix well. 5.2 Sodium hydroxide solution (10mol/L) Dissolve 400g of sodium hydroxide in water, dilute to 1L and mix well. This solution should be prepared in a water-cooled polyethylene beaker stored in polyethylene bottles. 5.3 Sodium hydroxide solution (1.0mol/L) 1.0mol/L sodium hydroxide standard solution or the concentration of about 1.0mol/L sodium hydroxide solution prepared by the following method. weigh ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 38265.9-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 38265.9-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 38265.9-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 38265.9-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
