Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 4096.1-2022 PDF English

US$125.00 · In stock · Download in 9 seconds
GB/T 4096.1-2022: Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 4096.1: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 4096.1-2022125 Add to Cart Auto, 9 seconds. Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes Valid
GB/T 4096-2001399 Add to Cart 3 days Geometrical product specifications (GPS) -- Series of angles and slopes on prisms Obsolete
GB/T 4096-1983199 Add to Cart 2 days Series of angles and slopes on wedges and prisms Obsolete

Similar standards

GB/T 5097   GB/T 4249   GB/T 4459.5   GB/T 9239.2   

GB/T 4096.1-2022: Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT4096.1-2022
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 17.040.01 CCS J 04 GB/T 4096.1-2022 / ISO 2538-1:2014 Replacing GB/T 4096-2001 Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014, IDT) ISSUED ON: OCTOBER 12, 2022 IMPLEMENTED ON: OCTOBER 12, 2022 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.

Table of Contents

Foreword ... 3 Introduction ... 5 1 Scope ... 6 2 Normative references ... 6 3 Terms and definitions ... 6 4 Wedge series ... 9 Annex A (Informative) Relationship to GPS matrix model ... 11 Bibliography ... 13

Foreword

This document was drafted in accordance with the rules provided in GB/T 1.1-2020 Directives for standardization - Part 1: Rules for the structure and drafting of standardizing documents. This document is part 1 of GB/T 4096 Geometrical product specifications (GPS) - Wedges. The following parts have been released for GB/T 4096. -- Part 1: Series of angles and slopes; -- Part 2: Dimensioning and tolerancing. This document replaces GB/T 4096-2001 Geometrical product specifications (GPS) - Series of angles and slopes on prisms; compared with GB/T 4096-2001, in addition to structural adjustments and editorial changes, the main technical changes are as follows: a) Change “prisms” to “wedges” (see Clause 3; Clause 3 of the 2001 edition); b) Remove the terms and definitions, as well as corresponding diagrams, of prism, multiple prism, height of prism and thickness of prism (see Clause 2 of the 2001 edition); c) Combine the three tables of “Series of angles and slopes on general-purpose prisms”, “Calculated values” and “Special-purpose prisms” into one table (see Clause 4; Clause 3 and Annex A of the 2001 edition). This document is identical to ISO 2538-1:2014 Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes. Add the clause “Normative references” in this document; Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying patents. This document shall be under the jurisdiction of National Technical Committee 240 on Product Dimension and Geometric Element Specifications of Standardization Administration of China (SAC/TC 240). Drafting organizations of this document: Shandong Industrial Technology Research Institute of Zhejiang University, Zhejiang University, Chengdu University of Information Technology, China Productivity Center for Machinery, Sinowon Innovation Metrology Manufacture Limited, Zhengzhou University, NEXTEV CO., LTD., China Machinery Research Institute of Standards and Technology (Beijing) Co., Ltd. Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes

1 Scope

This document specifies terms and definitions for wedges, three series of wedge angles (120° ~ 0° 30') and a series of wedge slopes (1:10 ~ 1:500). This document applies to general mechanical engineering purposes.

2 Normative references

There are no normative references in this document.

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply. 3.1 wedge Pair of intersecting planes. Note 1: A wedge is a feature of size defined by an angular size. Note 2: See Figure 1. 3.2 wedge angle Angular size of the wedge defined in a plane perpendicular to the wedge edge. Note: see Figure 1. 3.3 wedge slope ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 4096.1-2022 be delivered?Answer: The full copy PDF of English version of GB/T 4096.1-2022 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 4096.1-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 4096.1-2022_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 4096.1-2022 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 4096.1-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 4096.1-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 4096.1-2022?

A step-by-step guide to download PDF of GB/T 4096.1-2022_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 4096.1-2022".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9