|
Std ID |
Description (Standard Title) |
|
GB/T 35687-2017
|
Specification of LSB for large air cooling steam turbine
|
|
GB/T 35688-2017
|
Specification for large air-cooled steam turbine
|
|
GB/T 35689-2017
|
Technical requirements of information exchange bus for distribution network
|
|
GB/T 35690-2017
|
Methods for the determination of the relative magnetic permeability of feebly magnetic materials
|
|
GB/T 35691-2017
|
Guide for photovoltaic power station identification system
|
|
GB/T 35692-2017
|
Guideline for system planning of high voltage direct current (HVDC) power transmission project
|
|
GB/T 35693-2017
|
Technical specification for valve hall fittings of ±800 kV ultra-high voltage direct current (UHVDC) transmission project
|
|
GB/T 35694-2017
|
Safety code of photovoltaic power station
|
|
GB/T 35698.1-2017
|
Calculation of effects of short-circuit currents -- Part 1: Definitions and calculation methods
|
|
GB/T 35699-2017
|
Specification for power station control system of ship
|
|
GB/T 35700.1-2017
|
Requirements for ships mechanical and electric hybrid propulsion system -- Part 1: Propulsion system
|
|
GB/T 35700.2-2017
|
Requirements for ships shaft generator system -- Part 2: Generator system
|
|
GB/T 35702.1-2017
|
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems -- Part 1: General requirements
|
|
GB/T 35702.2-2017
|
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems -- Part 2: Modular multilevel converters
|
|
GB/T 35703-2017
|
Specification of system design for high-voltage direct current (HVDC) transmission using voltage sourced converters (VSC)
|
|
GB/T 35704-2017
|
Ship shaft brushless doubly fed AC generator
|
|
GB/T 35705-2017
|
Acoustic positioning system
|
|
GB/T 35708-2017
|
Testing method of fault location system in plateau distribution network
|
|
GB/T 35713-2017
|
Ships heading control systems
|
|
GB/T 35714-2017
|
Marine propulsion motors
|
|
GB/T 35715-2017
|
Calculation methods for short-circuit current of DC electrical system on ship
|
|
GB/T 35718.2-2017
|
Power systems management and associated information exchange-interoperability in the long term -- Part 2: End to end quality codes for supervisory control and data acquisition (SCADA)
|
|
GB/T 35721-2017
|
Distributed fault diagnosis system of transmission lines
|
|
GB/T 35722.1-2017
|
Intelligent automatic electrical controls system for household appliances and similar use -- Part 1: General requirements
|
|
GB/T 35722.2-2017
|
Intelligent automatic electrical controls system for household appliances and similar use -- Special requirements of intelligent automatic electrical controls system for induction cooker
|
|
GB/T 35725-2017
|
General requirements for automatic testing system of power quality monitoring equipment
|
|
GB/T 35726-2017
|
Performance testing rules of parallel active power quality curing device
|
|
GB/T 35727-2017
|
Guideline for standard voltages of medium and low voltage DC distribution system
|
|
GB/T 35729-2017
|
Code of practice for maintenance and test of digital electro-hydraulic control system of steam turbine in fossil fuel power plant
|
|
GB/T 35731-2017
|
Code of practice for maintenance and test of distributed control system in fossil fuel power plant
|
|
GB/T 35732-2017
|
Technical specifications of intelligent remote terminal unit of distribution automation
|
|
GB/T 35737-2017
|
Multi-rope mine drum hoist
|
|
GB/T 35739-2017
|
[Including 2021XG1] Continuous vertical conveyor for unit goods in logistics warehousing distribution center
|
|
GB/T 35741-2017
|
Specification of stainless steel forgings for industrial valves
|
|
GB/T 35742-2017
|
Public security -- Finger vein recognition applications -- Technical requirements for images
|
|
GB/T 35745-2017
|
Specifications for control and protection equipment of voltage source converter based high-voltage direct current (VSC-HVDC) transmission system
|
|
GB/T 35746-2017
|
Ships and marine technology--Ship's bridge layout and associated equipment--Requirements and guidelines
|
|
GB/T 35747-2017
|
Technical requirements and test methods for air jet room air conditioner
|
|
GB/T 35748-2017
|
Polytetrafluoroethylene filament
|
|
GB/T 35750-2017
|
Fireworks -- Charcoal powder
|
|
GB/T 1124.1-2007
|
Convex and concave milling cutters -- Part 1: The types and dimensions
|
|
GB/T 35752-2017
|
Warp-knitted composite geotextiles
|
|
GB/T 35753-2017
|
Installation rack standard for outdoor unit of air-conditioning
|
|
GB/T 35754-2017
|
Fibre-layer filter medium for gas purification
|
|
GB/T 35757-2017
|
Fireworks -- Clay
|
|
GB/T 35761-2017
|
Determination methods of heavy metal element content in printing ink or painting of fireworks and firecracker
|
|
GB/T 35762-2017
|
Textiles -- Test method for thermal transmittance -- Flat plate test
|
|
GB/T 35763-2017
|
Stainless steel faucet
|
|
GB/T 35770-2017
|
Compliance management systems -- Guidelines
|
|
GB/T 35771-2017
|
Determination of dimethyl sulfate and diethyl sulfate in cosmetics -- Gas chromatography-mass spectrometry method
|
|
GB/T 35772-2017
|
Rapid detection of phthalate esters in polyvinyl chloride products -- Infra-red spectrometric method
|
|
GB/T 35774-2017
|
Standard practice for performance testing of shipping containers
|
|
GB/T 35775-2017
|
Spatiotemporal infrastructure for smart city -- Evaluation indicator system
|
|
GB/T 35776-2017
|
Spatiotemporal infrastructure for smart city -- Basic specifications
|
|
GB/T 35777-2017
|
Mechanical tests for metal alloys adornment chains -- Tensile testing
|
|
GB/T 35778-2017
|
Enterprise standardization -- Guidelines
|
|
GB/T 35780.1-2017
|
Customer contact service -- Part 1: Requirements for customer contact centres
|
|
GB/T 35780.2-2017
|
Customer contact service -- Part 2: Requirements for clients using the services of customer contact centres
|
|
GB/T 35782-2017
|
Specification for swap trailer transport of road vehicles
|
|
GB/T 35783-2017
|
Information technology -- General specification for iris recognition devices
|
|
GB/T 35784-2017
|
Audio visual equipment -- Methods for the subjective assessment of small impairments in audio systems
|
|
GB/T 1124.2-1996
|
Convex and concave milling cutters--Part 2: The types and dimensions for convex milling cutters
|
|
GB/T 35787-2017
|
Security technical requirement for the read-write equipment of the electronic identification of motor vehicles
|
|
GB/T 1124.2-2007
|
Convex and concave milling cutters -- Part 2: Technical specifications
|
|
GB/T 35791-2017
|
Specification for single-phase-to-ground fault feeder selection device based on traveling waves for neutral non-effectively grounded system
|
|
GB/T 3768-2017
|
Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
|
|
GB/T 3836.11-2017
|
Explosive atmospheres -- Part 11: Material characteristics for gas and vapour classification -- Test methods and data
|
|
GB/T 3836.16-2017
|
Explosive atmospheres -- Part 16: Electrical installations inspection and maintenance
|
|
GB/T 3836.24-2017
|
Explosive atmospheres -- Part 24: Equipment protection by special protection “s”
|
|
GB/T 1124.3-1996
|
Convex and concave milling cutters technical specifications
|
|
GB/T 11250.1-1989
|
Methods for measuring thickness of coated layer on composite metal--The metallographic method
|
|
GB/T 3903.6-2017
|
Footwear -- Test methods for whole shoe -- Slip performance
|
|
GB/T 4127.17-2017
|
Bonded abrasive products -- Dimensions -- Part 17: Spindle mounted wheels
|
|
GB/T 4127.18-2017
|
Bonded abrasive products -- Dimensions -- Part 18: Grinding wheels for flat glass edge grinding machines
|
|
GB/T 4243-2017
|
Long fluted machine reamers with Morse taper shanks
|
|
GB/T 4247-2017
|
Machine bridge reamers with Morse taper shanks
|
|
GB/T 4314-2017
|
Getter terms
|
|
GB/T 5099.1-2017
|
Seamless steel gas cylinders -- Part 1: Quenched and tempered steel cylinders with tensile strengthless than 1 100 MPa
|
|
GB/T 5099.3-2017
|
Seamless steel gas cylinders -- Part 3: Normalized cylinders
|
|
GB/T 5101-2017
|
Fired common bricks
|
|
GB/T 5169.11-2017
|
Fire hazard testing for electric and electronic products -- Part 11: Glowing/hot-wire based test methods -- Glow-wire flammability test method for end-products (GWEPT)
|
|
GB/T 5169.14-2017
|
Fire hazard testing for electric and electronic products -- Part 14: Test flames--1 kW nominal pre-mixed flame -- Apparatus, confirmatory test arrangement and guidance
|
|
GB/T 11250.2-1989
|
Method for measuring thickness of coated layer on composite metal--The X-ray fluorescent method
|
|
GB/T 5170.10-2017
|
Inspection methods for environmental testing equipment -- Part 10: Combined high and low temperature/low air pressure testing equipment
|
|
GB/T 5170.11-2017
|
Inspection methods for environmental testing equipment -- Part 11: Corrosive gas testing equipment
|
|
GB/T 5170.2-2017
|
Inspection methods for environmental testing equipment -- Part 2: Temperature testing equipment
|
|
GB/T 5170.8-2017
|
Inspection methods for environmental testing equipment -- Part 8: Salt mist testing equipment
|
|
GB/T 5170.9-2017
|
Inspection methods for environmental testing equipment -- Part 9: Solar radiation testing equipment
|
|
GB/T 5177-2017
|
Industrial lineal alkylbenzene
|
|
GB/T 5267.2-2017
|
Fasteners -- Non-electrolytically applied zinc flake coatings
|
|
GB/T 5310-2017
|
[Including 2019XG1] Seamless steel tubes and pipes for high pressure boiler
|
|
GB/T 5480-2017
|
Test methods for mineral wool and its products
|
|
GB/T 6122-2017
|
Corner-rounding cutters
|
|
GB/T 6405-2017
|
Super-abrasive -- Types of cubic boron nitride
|
|
GB/T 11250.3-1989
|
Method for measuring thickness of nickel-coated layer on composite metal--The volumetry
|
|
GB/T 11250.4-1989
|
Method for measuring thickness of aluminum-coated layer on composite metal--The gravimetric method
|
|
GB/T 6505-2017
|
Man-made fiber -- Test method for thermal shrinkage of filament yarns (after treatment)
|
|
GB/T 11251-1989
|
Hot-rolled alloy structural steel plates
|
|
GB/T 7036.2-2017
|
Inner tube of pneumatic tyres -- Part 2: Inner tube of motorcycle tyres
|
|
GB/T 7064-2017
|
Specific requirements for cylindrical rotor synchronous machines
|