|
Std ID |
Description (Standard Title) |
|
GB/T 3460-2007
|
Ammonium molybdate
|
|
GB/T 3461-1982
|
Technical requirements of molybdenum powders
|
|
GB/T 3461-2006
|
Molybdenum powder
|
|
GB/T 3461-2016
|
Molybdenum powder
|
|
GB/T 346-1984
|
Galvanized low carbon steel wire for electric communications lines
|
|
GB/T 3462-1982
|
Bars and plate blanks of molybdenum
|
|
GB/T 3462-2007
|
Bars and plate blanks of molybdenum
|
|
GB/T 3463-1995
|
Tantalum wires
|
|
GB/T 3464.1-1994
|
Machine and hand taps
|
|
GB/T 3464.1-2007
|
Machine and hand taps -- Part 1: Plain parallel shank machine and hand taps
|
|
GB/T 3464.2-1994
|
Long shank machine taps
|
|
GB/T 3464.2-2003
|
Long reduced shank taps
|
|
GB/T 3464.3-1994
|
Short shank machine and hand taps
|
|
GB/T 3464.3-2007
|
Machine and hand taps -- Part 3: Short shank machine and hand taps
|
|
GB/T 3466-1983
|
Long shank nut taps
|
|
GB/T 3468-1983
|
General editorial rule for retrieval periodicals
|
|
GB/T 3469-1983
|
Codes for documentary types and documentary carriers
|
|
GB/T 3469-2013
|
Content form and media type of information resource
|
|
GB/T 3471-1995
|
General provisions for programming mooring and sea trials of sea going ships
|
|
GB/T 3471-2011
|
General provisions for programming mooring and sea trials of sea going ships
|
|
GB/T 347-1982
|
Card wire
|
|
GB/T 3475-1983
|
Speed governing of marine diesel engines--Specifications
|
|
GB/T 3475-2008
|
Requirement and test method for speed governing system of marine diesel engine
|
|
GB/T 3476-1983
|
Speed governing of marine diesel engines--Methods of test
|
|
GB/T 3477-1996
|
Marine weathertight single-leaf steel doors
|
|
GB/T 3477-2008
|
Marine weathertight single-leaf steel doors
|
|
GB/T 3478.1-1995
|
Straight cylindrical involute splines--Modules, basic rack profiles and tolerances
|
|
GB/T 10629-1989
|
Textiles--Proparation of laboratory test samples and test specimens for chemical testing
|
|
GB/T 3478.2-1995
|
Straight cylindrical involute splines--30 Degree pressure angle dimensions tables
|
|
GB/T 3478.2-2008
|
Straight cylindrical involute splines -- Metric module, side fit -- Part 2: 30-degreepressure angle dimensions tables
|
|
GB/T 3478.3-1995
|
Straight cylindrical involute splines--37. 5 Degree pressure angle dimensions tables
|
|
GB/T 3478.3-2008
|
Straight cylindrical involute splines -- Metric module, side fit -- Part 3: 37.5-degreepressure angle dimensions tables
|
|
GB/T 3478.4-1995
|
Straight cylindrical involute splines--45 Degree pressure angle dimensions tables
|
|
GB/T 3478.4-2008
|
Straight cylindrical involute splines -- Metric module, side fit -- Part 4: 45-degreepressure angle dimensions tables
|
|
GB/T 3478.5-1995
|
Straight cylindrical involute splines inspection methods
|
|
GB/T 3478.5-2008
|
Straight cylindrical involute splines -- Metric module, side fit -- Part 5: Inspection
|
|
GB/T 3478.6-1995
|
Straight cylindrical involute splines 30 Degree pressure angle-- M and W values
|
|
GB/T 3478.6-2008
|
Straight cylindrical involute splines -- Metric module, side fit -- Part 6: 30-degreepressure angle M and W values
|
|
GB/T 3478.7-1995
|
Straight cylindrical involute splines 37. 5 Degree pressure angle--M and W values
|
|
GB/T 3478.7-2008
|
Straight cylindrical involute splines - Metric module, side fit. 37.5-degreepressure angle M and W values
|
|
GB/T 3478.8-1995
|
Straight cylindrical involute splines 45 Degree pressure angle-- M and W values
|
|
GB/T 3478.8-2008
|
Straight cylindrical involute splines - Metric module, side fit. 45-degreepressure angle M and W values
|
|
GB/T 3478.9-1995
|
Straight cylindrical involute splines Measuring pin
|
|
GB/T 3478.9-2008
|
Straight cylindrical involute splines -- Metric module, side fit -- Part 9: Measuring pin
|
|
GB/T 3480.5-2008
|
Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials
|
|
GB/T 3480-1997
|
Calculation methods of load capacity for involute cylindrical gears
|
|
GB/T 3481-1983
|
Nomenclature, characteristics, causes of gear tooth failure
|
|
GB/T 3481-1997
|
Gears. Wear and damage to gear teeth. Terminology
|
|
GB/T 348-1964
|
Barbed steel wires
|
|
GB/T 3482-1983
|
Lightning test for electronic equipments
|
|
GB/T 3482-2008
|
Lightning test method for electronics equipment
|
|
GB/T 3483-1983
|
Guidance of lightning test for electronic equipments
|
|
GB/T 3484-1993
|
The general principles for energy balance of industrial enterprise
|
|
GB/T 3484-2009
|
The general principles for energy balance of enterprise
|
|
GB/T 3485-1983
|
Technical guides for evaluating the rationality of electricity usage in industrial enterprise
|
|
GB/T 3485-1998
|
Technical guides for evaluating the rationality of electricity usage in industrial enterprise
|
|
GB/T 3486-1993
|
Technical guides for evaluating the rationality of heat usage in industrial enterprise
|
|
GB/T 3487-1996
|
Rim contours for motor vehicles
|
|
GB/T 3487-2005
|
Rim contours for motor vehicles
|
|
GB/T 10629-2009
|
Textiles -- Preparation of laboratory test samples and test specimens for chemical testing
|
|
GB/T 3488.1-2014
|
Hard metals -- Metallographic determination of microstructure -- Part 1: Photomicrographs and description
|
|
GB/T 3488-1983
|
Hardmetals--Metallographic determination of microstructure
|
|
GB/T 3489-1983
|
Hardmetals. Metallographic determination of porosity and uncombined carbon
|
|
GB/T 3489-2015
|
Hard metals -- Metallographic determination of porosity and uncombined carbon
|
|
GB/T 3490-1983
|
Metallographic determination of cuprous oxide in copper containing precious metal materials
|
|
GB/T 3491-1983
|
Standard method for measuring thickness of thin foil of the precious metals and their alloys (weighing method)
|
|
GB/T 3492-1983
|
Standard method for measuring size of fine and thin tube of the precious metals and their alloys (weighing method)
|
|
GB/T 3493-1983
|
Standard method for measuring diameter of fine wire of the precious metals and their alloys (weighing method)
|
|
GB/T 3494-1996
|
Zinc oxide produced by direct method
|
|
GB/T 3494-2012
|
Zinc oxide produced by direct method
|
|
GB/T 3496-1983
|
Zinc plates for lithography
|
|
GB/T 3498-1983
|
Lubricating greases--Determination of dropping point (wide temperature range)
|
|
GB/T 3498-2008
|
Petroleum products -- Determination of dropping point of lubricating greases (wide temperature range)
|
|
GB/T 3499-1995
|
Unalloyed magnesium ingots for remelting
|
|
GB/T 3499-2003
|
Magnesium ingots
|
|
GB/T 3499-2011
|
Magnesium ingots
|
|
GB/T 3500-1998
|
Powder metallurgy--Vocabulary
|
|
GB/T 3500-2008
|
Powder metallurgy -- Vocabulary
|
|
GB/T 3501-1983
|
Technical requirements of superfine ruthenium dioxide hydrate powder
|
|
GB/T 3502-1983
|
Technical requirements of superfine palladium oxide powder
|
|
GB/T 3503-1993
|
Yttrium oxide
|
|
GB/T 3503-2006
|
Yttrium oxide
|
|
GB/T 3503-2015
|
Yttrium oxide
|
|
GB/T 3504-1992
|
Europium oxide phosphor grade
|
|
GB/T 3504-2006
|
Europium oxide
|
|
GB/T 3504-2015
|
Europium oxide
|
|
GB/T 3505-1983
|
Surface roughness--Terminology for Surface and its parameters
|
|
GB/T 3505-2000
|
Geometrical Product Specifications (GPS)-Surface texture: Profile method-Terms, definitions and surface texture parameters
|
|
GB/T 3505-2009
|
Geometrical product specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters
|
|
GB/T 3506-1993
|
Machine taps with helical flutes
|
|
GB/T 3506-2008
|
Machine taps with helical flutes
|
|
GB/T 3507-1983
|
Nominal torque series of the mechanical coupling
|
|
GB/T 3507-2008
|
Nominal torque series of the mechanical coupling
|
|
GB/T 3510-1992
|
Rubber, unvuicanized-Determination of Plasticity-Rapid plastimeter method
|
|
GB/T 3510-2006
|
Rubber, unvulcanized -- Determination of plasticity -- Rapid plastic meter method
|
|
GB/T 3511-1983
|
Rubber, vulcanized--The test method of resistance to natural weathering
|
|
GB/T 3511-2001
|
Rubber, vulcanized and thermoplastic the test method of resistance to direct natural weathering
|
|
GB/T 3511-2008
|
Rubber, vulcanized or thermoplastic -- Resistance to weathering
|
|
GB/T 351-1995
|
Metallic materials. Resistivity measurement method
|
|
GB/T 3512-1983
|
Rubber, vulcanized--Accelerated ageing or heat-resistance test--Air-oven method
|