|
Std ID |
Description (Standard Title) |
|
GB/T 32428-2015
|
Information technology -- SOA service quality model measurement and evaluation specification
|
|
GB/T 32429-2015
|
Information technology -- Life cycle processes of SOA application
|
|
GB/T 32430-2015
|
Information technology -- Service analysis and design of SOA application
|
|
GB/T 32431-2015
|
Information technology -- SOA service delivery assurance specification
|
|
GB/T 32432-2015
|
Domestic steel cookware
|
|
GB/T 32433-2015
|
Footwear -- Chemical test method -- Heavy metal content -- Microwave plasma atomic emission spectroscopy
|
|
GB/T 32434-2015
|
Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
|
|
GB/T 32435-2015
|
Footwear -- Test method for volatile organic compounds
|
|
GB/T 32436-2015
|
Footwear fitting -- Assessment for last
|
|
GB/T 10590-1989
|
Specification for low temperature/low air pressure test chambers
|
|
GB/T 32439-2015
|
Cross helically wound steel wires reinforced-polyethylene composite pipelines for water supply
|
|
GB/T 10590-2006
|
Specifications for high and low temperature/low air pressure testing chambers
|
|
GB/T 10591-1989
|
Specification for high temperature/low air pressure test chambers
|
|
GB/T 32442-2015
|
Assembly technical requirements for knock-down furniture
|
|
GB/T 32443-2015
|
Determination of the emission of volatile organic compounds from furniture -- Emission test cell method
|
|
GB/T 32444-2015
|
General technical requirements for bamboo furniture
|
|
GB/T 32445-2015
|
Classification of furniture materials
|
|
GB/T 32446-2015
|
General technical requirements for glass furniture
|
|
GB/T 10591-2006
|
Specifications for high temperature/low air pressure testing chambers
|
|
GB/T 32448-2015
|
Determination of the heavy metal Pb, Cr, Cd, Ba, Hg, As, Se, Sb dissolved in adhesives
|
|
GB/T 32451-2015
|
Space project management
|
|
GB/T 32452-2015
|
Terminology of space environment for spacecraft
|
|
GB/T 32453-2015
|
Rule for classification and gradation of earth observation satellite data product
|
|
GB/T 32454-2015
|
Flight evaluation of launch vehicle
|
|
GB/T 32455-2015
|
Terminology of launch vehicle
|
|
GB/T 32456-2015
|
General specification for electromagnetic heating energy saving system of rubber and plastics machines
|
|
GB/T 32457-2015
|
Conveyor belts -- Specification for rubber-or plastics-covered conveyor belts of textile construction for general use
|
|
GB/T 3246.1-2000
|
Wrought aluminium and aluminium alloys products inspection method for microstructure
|
|
GB/T 3246.1-2012
|
Inspection method for structure of wrought aluminum and aluminum alloy products -- Part 1: Inspection method for microstructure
|
|
GB/T 3246.2-2000
|
Wrought aluminium and aluminium alloys products inspection method for macrostructure
|
|
GB/T 3246.2-2012
|
Inspection method for structure of wrought aluminum and aluminum alloy products -- Part 2: Inspection method for macrostructure
|
|
GB/T 32461-2015
|
Determination of formaldehyde in amino resins and phenolic resins and of migration of formaldehyde in their moldings -- High performance liquid chromatography
|
|
GB/T 3246-1982
|
Aluminum and aluminum alloys--Inspection method of microstructure for wrought products
|
|
GB/T 32462-2015
|
Determination of the migration of antimony in polyester resin and products -- Atomic fluorescence spectrophotometer
|
|
GB/T 32463-2015
|
Identification method for material of polypropylene (PP-R, PP-B, PP-H) pipes or fittings
|
|
GB/T 32464-2015
|
Internal quality control for chemical analysis laboratories applying control graphic -- Audit analytical system
|
|
GB/T 32465-2015
|
Requirements for verification and validation of detection methods and internal quality control on chemical analysis
|
|
GB/T 32466-2015
|
Accelerated stress testing procedures for electric and electronic products -- Guidance for highly accelerated stress screen
|
|
GB/T 32467-2015
|
Verification and validation of methods and internal quality control on chemical analysis -- Terms and definitions
|
|
GB/T 10592-1989
|
Specification for low/high temperature test chambers
|
|
GB/T 32469-2016
|
Plastics-Polyurethane raw materials -- Toluene diisocyanate
|
|
GB/T 32470-2016
|
Organic compounds in drinking water -- Test methods of geosmin and 2-methylisoborneol
|
|
GB/T 32471-2016
|
Plastics -- Determination of the isomer ratio in toluene diisocyanate for use in the production of polyurethanes
|
|
GB/T 3247-1982
|
Aluminum and aluminum alloys--Inspection method of microstructure for wrought products
|
|
GB/T 32472-2016
|
D113 macroporous weak acid acrylic type cation exchange resins
|
|
GB/T 32473-2016
|
Ion exchange resins for condensate polishing treatment
|
|
GB/T 32474-2016
|
Rubber hoses and hose assemblies for petroleum drilling well control equipment
|
|
GB/T 32475-2016
|
Rubber hose and hose assemblies for coal seam water injection, gas drainage and drilling plugging
|
|
GB/T 32476-2016
|
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing system
|
|
GB/T 32477-2016
|
Plastics -- Determination of total chlorine content in toluene diisocyanate for use in the production of polyurethanes
|
|
GB/T 10592-2008
|
Specification for low/high temperature test chambers
|
|
GB/T 32479-2016
|
General safety technical requirements for recycled fiber
|
|
GB/T 32480-2016
|
Textile machinery -- Mixing bale openers for cotton spinning -- Vocabulary and principles of construction
|
|
GB/T 32481-2016
|
Performance requirements of LED luminaires for tunnel lighting
|
|
GB/T 3248-1982
|
Determining method of resistivity of copper, nickel and their alloys
|
|
GB/T 32482.1-2016
|
LED -- Binning -- Part 1: General requirements and white colour grid
|
|
GB/T 32483.1-2016
|
Energy performance of lamp controlgear -- Part 1: Controlgear for fluorescent lamps -- Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear
|
|
GB/T 32483.3-2016
|
Energy performance of lamp controlgear -- Part 3: Controlgear for halogen lamps and LED modules -- Method of measurement to determine the efficiency of the controlgear
|
|
GB/T 32484-2016
|
Watch-cases and accessories -- Vapour phase deposited coatings
|
|
GB/T 32485-2016
|
Methods of evaluation of the battery life of a battery-powered watch
|
|
GB/T 32486-2016
|
General specification for LED luminaries of stage
|
|
GB/T 32487-2016
|
General technical requirements for plastic furniture
|
|
GB/T 32488-2016
|
Ductile iron pipes and fittings -- Seal coats for cement mortar linings
|
|
GB/T 32489-2016
|
Technical requirement of energy-saving operation for reheating furnace in steel rolling
|
|
GB/T 32491-2016
|
Test method for long-term hydrostatic pressure of glass fiber reinforced thermosetting resin pipe and fittings
|
|
GB/T 3249-1982
|
Standard method for determination of particle size of powders of refractory metals and compounds--Fisher method
|
|
GB/T 3249-2009
|
Test method for fisher number of metal powders and related compounds
|
|
GB/T 32492-2016
|
Content of dimethyl ether in liquefied petroleum gas by gas chromatography
|
|
GB/T 32493-2016
|
Test method of ballistic resistance for fibre reinforced composites -- Specific absorbed energy by perforation method
|
|
GB/T 32495-2016
|
Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth profiling of arsenic in silicon
|
|
GB/T 32496-2016
|
Test method for volume fraction of reinforcement in metal matrix composites -- Image analysis method
|
|
GB/T 32497-2016
|
Test method of ballistic resistance against fragment simulating projectiles for fiber-reinforced composites -- V50 method
|
|
GB/T 32498-2016
|
Metal matrix composites -- Tensile testing -- Method of test at ambient temperature
|
|
GB/T 32499-2016
|
Connecting devices -- Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units
|
|
GB/T 325.1-2008
|
Packing containers -- Steel drums -- Part 1: General specifications
|
|
GB/T 325.2-2010
|
Packaging container -- Steel drums -- Part 2: Removable head (open head) drums with a minimum total capacity of 208l, 210l and 216.5l
|
|
GB/T 325.3-2010
|
Packaging container -- Steel drums -- Part 3: Non-removable head (tight head) drums with a minimum total capacity of 212L, 216.5L and 230L
|
|
GB/T 325.4-2015
|
Packing containers -- Steel drums -- Part 4: Removable head (open head) drums with a maximum total capacity of 200 L
|
|
GB/T 325.5-2015
|
Packing containers -- Steel drums -- Part 5: Non-removable head (tight head) drums with a maximum total capacity of 200 L
|
|
GB/T 3250-1982
|
Aluminum and aluminum alloys--Riveting test method for rivet wire
|
|
GB/T 3250-2007
|
Aluminium and aluminium alloys shear test method for rivet wire and rivets and riveting test method for rivet wire
|
|
GB/T 32502-2016
|
Overhead electrical stranded conductors composite core supported/reinforced
|
|
GB/T 32503.1-2016
|
Household and similar adjustable frequency converter safety -- Part 1: General requirements
|
|
GB/T 32504-2016
|
Civil lead-acid battery technical code for safety
|
|
GB/T 32505-2016
|
Variable-frequency drive for machine tool
|
|
GB/T 32506-2016
|
Code of operation and maintenance for excitation system of pumped storage unit
|
|
GB/T 32507-2016
|
Power quality -- Terms
|
|
GB/T 32508-2016
|
Quantitative determination of corrosive sulfur (dibenzyl disulfide, DBDS) in insulating liquids
|
|
GB/T 32509-2016
|
General specification for vanadium flow battery
|
|
GB/T 32510-2016
|
Guide for pumped storage power plant identification system
|
|
GB/T 32511-2016
|
General technical requirements for electromagnetic shielding plastic
|
|
GB/T 3251-1982
|
Aluminum and aluminum alloys--Compression test method for tubes
|
|
GB/T 3251-2006
|
Compression test method for aluminium and aluminium alloys tubes
|
|
GB/T 32512-2016
|
Technical requirements for protection of photovoltaic power station against lightning
|
|
GB/T 32514.1-2016
|
Resistance welding -- Welding current measurement for resistance welding -- Part 1: Guidelines for measurement
|
|
GB/T 32514.2-2016
|
Resistance welding -- Welding current measurement for resistance welding -- Part 2: Welding current meter with current sensing coil
|
|
GB/T 32514.3-2016
|
Resistance welding -- Welding current measurement for resistance welding -- Part 3: Current sensing coil
|
|
GB/T 32514.4-2016
|
Resistance welding -- Welding current measurement for resistance welding -- Part 4: Calibration system
|
|
GB/T 32514.5-2016
|
Resistance welding -- Welding current measurement for resistance welding -- Part 5: Verification of welding current measuring system
|
|
GB/T 32515-2016
|
Variable-frequency drive for injection molding machine
|