GB/T 32430-2015 English PDF

US$319.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 32430-2015: Information technology -- Service analysis and design of SOA application
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 32430-2015	319	Add to Cart	3 days	Information technology -- Service analysis and design of SOA application	Valid

Similar standards

GB/T 31916.3   GB/T 31916.2   GB/T 31916.5   GB/T 32428   GB/T 32427   

Basic data

Standard ID: GB/T 32430-2015 (GB/T32430-2015)
Description (Translated English): Information technology -- Service analysis and design of SOA application
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L79
Classification of International Standard: 35.100.05
Word Count Estimation: 15,110
Date of Issue: 2015-12-31
Date of Implementation: 2017-01-01
Quoted Standard: GB/T 29262; GB/T 32428-2015
Regulation (derived from): State Standard Announcement 2015 No.43
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the process model, service analysis requirements, and service design requirements for service analysis and design of SOA applications. This standard is applicable to service analysis and design in the course of SOA project implementation. It can provide basic technology for user units and system integrators, ISVs, consulting vendors, service providers and other construction units to plan and implement SOA-based informatization projects. guide.

GB/T 32430-2015: Information technology -- Service analysis and design of SOA application

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Information technology - Service analysis and design of SOA application ICS 35.100.05 L79 National Standards of People's Republic of China IT Services analysis and design of SOA applications Issued on. 2015-12-31 2017-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 1 General 5 Service Analysis and Design Process Model 1 6 Service analysis requires 2 6.1 Object Modeling 2 6.2 Responsibilities Modeling 3 6.3 Process Modeling 3 6.4 Data Modeling 4 6.5 Business Analysis Services dimension 4 6.6 Analysis of system maintenance services 4 6.7 Screening Services 4 7 Service Design Requirements 5 7.1 Summary 5 7.2 Service Category 6 Definition 6 7.3 Service 7.4 Service Interface Design 7 7.5 service implementation decisions 8 Appendix A (informative) outcomes template Example 9

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. This standard by the National Information Technology Standardization Technical Committee (SAC/TC28) and focal points. This standard was drafted. PLA Logistics Institute, China Electronics Standardization Institute, Beijing University of Aeronautics and Astronautics, Shandong The wave of Qilu Software Industry Co., Ltd., Beijing Dongfang Technology Co., Ltd., Shandong commercial software Middleware Company Limited Division Shanghai Baoxin Software Co., Ltd. The main drafters of this standard. Yang Yun, Liu, Wang Zhidong, Zhang Lei, Wang Li Meng, Ren Jie, Yuan Yuan, Wang Chaoyang, ZHAO Yong Wang, Judd stars, XU Bao new, Ma Liang, Zhou Ming.

Introduction

This standard was developed to apply SOA service analysis and all aspects of the design process to normalize for the user in the organization and implementation SOA-based information project found, identified, classified, extracted provide reference service, to carry out services classified as technology development, Definition, modeling, design, provide guidance and basis, at the same time, users and technical personnel cooperation service analysis and design to establish a unified communication bridge. IT Services analysis and design of SOA applications

1 Scope

This standard specifies the SOA application service analysis and design process models, service requirements and service design analysis requirements. This standard applies to SOA project implementation process analysis and design services, for user units and systems integrators, independent software provides Provider, advising manufacturers, service providers and other construction units to provide basic planning and implementation of technical guidance SOA-based information technology projects.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 29262 architecture for IT services (SOA) term GB/T 32428-2015 quality IT SOA service model specification and evaluation

3 Terms and Definitions

Terms and definitions GB/T 29262 apply as defined in this document.

4 General

Analysis and design of SOA applications and services should meet the following requirements. a) clear objectives. Analysis and Design service are ultimately in order to achieve the project objectives, the service discovery, screening and implementation should focus on The central task of expansion; b) spiral iteration. Around service analysis and design iterations to expand, we should focus on service and value generated in each iteration; c) Process Management. Service analysis of each stage of the design process have a clear job content and acceptance criteria; d) software modeling. The method of using the service modeling tools to promote communication and exchange of users and technicians.

5 Service Analysis and Design Process Model

Service analysis and design process model consists of eight sub-process composition, as follows. goal modeling, role modeling, process modeling, data modeling, industry Service and maintenance services analysis, systems analysis and maintenance services, service identification and selection, service design, shown in Figure 1. The first seven sub-processes are service Analysis, 8 sub-process for the service design process. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 32430-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 32430-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 32430-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 32430-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.