|
Std ID |
Description (Standard Title) |
|
GB/T 28867-2012
|
Secondary cells and batteries containing alkaline or other non-acid electrolytes -- Sealed nickel-cadmium prismatic rechargeable single cells
|
|
GB/T 28868-2012
|
Dimensions of uncoated ring cores of magnetic oxides
|
|
GB/T 28869.1-2012
|
Cores made of soft magnetic materials -- Measuring methods -- Part 1: Generic specification
|
|
GB/T 28871-2012
|
Critical current measurement -- DC critical current of Nb3Sn composite superconductors
|
|
GB/T 2887-1989
|
Specification for computation center field
|
|
GB/T 2887-2000
|
Specification for electronic computer field
|
|
GB/T 2887-2011
|
General specification for computer field
|
|
GB/T 28872-2012
|
Testing method of magnetic lightly-striking mode atomic force microscope for nano-topography of living cells
|
|
GB/T 28873-2012
|
General guide of environmental scanning electron microscopy for biological effects on topography induced by nanoparticles
|
|
GB/T 28874-2012
|
Specification for level of data products for space science experiments
|
|
GB/T 28875-2012
|
Space science experiment -- Requirement for biological samples
|
|
GB/T 28876.1-2012
|
Flammability of materials in space experimental facilities -- Part 1: Requirements
|
|
GB/T 28876.2-2014
|
Flammability of materials in space experimental facilities -- Part 2: Test methods
|
|
GB/T 28877-2012
|
General requirements for space science experiments
|
|
GB/T 28878.1-2012
|
Specification of the rotating component in space science experiments -- Part 1: General requirements of design
|
|
GB/T 28878.2-2016
|
Specification of the rotating component in space science experiments -- Part 2: Requirements of lubrication design
|
|
GB/T 28878.3-2016
|
Specification of the rotating component in space science experiments -- Part 3: Ball bearing acceptance
|
|
GB/T 28878.4-2016
|
Specification of the rotating component in space science experiments -- Part 4: Lubrication oil acceptance
|
|
GB/T 28878.5-2016
|
Specification of the rotating component in space science experiments -- Part 5: Motors acceptance
|
|
GB/T 28878.6-2016
|
Specification of the rotating component in space science experiments -- Part 6: Property testing
|
|
GB/T 28878.7-2016
|
Specification of the rotating component in space science experiments -- Part 7: Reliability test
|
|
GB/T 28878.8-2016
|
Specification of the rotating component in space science experiments -- Part 8: Assemble
|
|
GB/T 28879-2012
|
Nomenclature of model for electrotechnical instruments
|
|
GB/T 28880-2012
|
Non-destructive testing -- Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
|
|
GB/T 2888-1991
|
Methods of noise measurement for fans, blowers compressors and roots blowers
|
|
GB/T 10421-1989
|
Sintered metal friction materials--Determination of density
|
|
GB/T 28882-2012
|
Rare earth carbonate of ion-absorbed type rare earth ore
|
|
GB/T 28885-2012
|
[Including Modification 2018XG1] Specifications for city gas service
|
|
GB/T 28886-2012
|
Plastic door for buildings
|
|
GB/T 28887-2012
|
Plastic window for buildings
|
|
GB/T 28888-2012
|
Technical requirements of gas monitoring for sewer and septic tanks
|
|
GB/T 28889-2012
|
Test method for In-plane shear properties of composite materials
|
|
GB/T 2889.1-2008
|
Plain bearings -- Terms, definitions and classification -- Part 1: Design, bearing materials and their properties
|
|
GB/T 2889.4-2011
|
Plain bearings -- Terms, definitions, classification and symbols -- Part 4: Basic symbols
|
|
GB/T 28890-2012
|
Terms of building ceramic machinery
|
|
GB/T 28891-2012
|
Fibre-reinforced plastic composites -- Determination of mode Ⅰ interlaminar fracture toughness GⅠC for unidirectionally reinforced materials
|
|
GB/T 2889-1994
|
Plain bearing--Terms, definitions and classification
|
|
GB/T 28892-2012
|
Surface chemical analysis -- X-ray photoelectron spectroscopy -- Description of selected instrumental performance parameters
|
|
GB/T 28893-2012
|
Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Methods used to determine peak intensities and information required when reporting results
|
|
GB/T 28894-2012
|
Surface chemical analysis -- Handling of specimens prior to analysis
|
|
GB/T 28895-2012
|
Protective Clothing - Performance Requirements of Oil Repellency, Soil Release, Antistatic Clothing
|
|
GB/T 28896-2012
|
Metallic Materials -- Method of test for the determination of quasi-static fracture toughness of welds
|
|
GB/T 28897-2012
|
Steel pipes of complex plastic
|
|
GB/T 28898-2012
|
Evaluation of uncertainty in chemical composition analysis for metallurgical materials
|
|
GB/T 28899-2012
|
Wire rods for cold rolled ribbed steel bars
|
|
GB/T 28900-2012
|
Test methods of steel for reinforcement of concrete
|
|
GB/T 28901-2012
|
Analysis of coke-oven gas composition by gas chromatography
|
|
GB/T 28902-2012
|
Electrolytic polishing for stainless steel wires
|
|
GB/T 28903-2012
|
Stainless steel wire for spoke
|
|
GB/T 28904-2012
|
Steel strips for steel-aluminum composite
|
|
GB/T 28905-2012
|
Low yield strength steel plates for construction
|
|
GB/T 28906-2012
|
Hot rolled wire rod for cold heading
|
|
GB/T 28907-2012
|
Sulfuric acid dew-point corrosion resistance steel plates and strips
|
|
GB/T 28908-2012
|
High-purity chromium metal
|
|
GB/T 28909-2012
|
Extra-high strength structural steel plates in the heat-treatment condition
|
|
GB/T 28910-2012
|
The measurement method of crude oil rheological properties
|
|
GB/T 28911-2012
|
Vocabulary of drilling engineering for the petroleum and natural gas
|
|
GB/T 2891-1995
|
Performance test methods for facepiece of filfer type respirator
|
|
GB/T 28912-2012
|
Test method for two phase relative permeability in rock
|
|
GB/T 28913-2012
|
Terminology of adult education and training service
|
|
GB/T 28914-2012
|
Evaluation of training worker′s service capability in adult education and training
|
|
GB/T 28915-2012
|
General service guideline for adult education and training organizations
|
|
GB/T 28916-2012
|
Basic requirement for housework service
|
|
GB/T 28917-2012
|
Basic requirement for hospital accompany service
|
|
GB/T 28918-2012
|
Basic requirement for nursery service at home
|
|
GB/T 28919-2012
|
Rehabilitation training devices -- Standing frames
|
|
GB/T 289-1964
|
Needle roller bearings--Types and basic dimensions
|
|
GB/T 28920-2012
|
Operation and management for dangerous solids and liquids in educational experiments
|
|
GB/T 28921-2012
|
Classification and codes for natural disasters
|
|
GB/T 2892-1995
|
Performance test methods for canister of filter type respirator
|
|
GB/T 28922-2012
|
Technical aids for persons with disability -- Environmental control systems for daily living
|
|
GB/T 28923.1-2012
|
Mapping requirements for the natural disaster remote sensing thematic maps -- Part 1: Classification, codes and mapping
|
|
GB/T 28923.2-2012
|
Mapping requirements for the natural disasters remote sensing thematic maps -- Part 2: Monitoring thematic maps
|
|
GB/T 28923.3-2012
|
Mapping requirements for the natural disaster remote sensing thematic maps -- Part 3: Risk assessment thematic maps
|
|
GB/T 28923.4-2012
|
Mapping requirements for the natural disaster remote sensing thematic maps -- Part 4: Loss assessment thematic maps
|
|
GB/T 28923.5-2012
|
Mapping requirements for the natural disaster remote sensing thematic maps -- Part 5: Relief and recovery assessment thematic maps
|
|
GB/T 28924-2012
|
Guides for calculating energy efficiency index of an iron and steel enterprise
|
|
GB/T 28925-2012
|
Information technology -- Radio frequency identification -- Air interface protocol at 2.45GHz
|
|
GB/T 28926-2012
|
Information technology -- Radio frequency identification -- Conformance test methods for air interface at 2.45 GHz
|
|
GB/T 28927-2012
|
Specification for service quality of resort community
|
|
GB/T 28928-2012
|
Guidelines for community leisure service
|
|
GB/T 28929-2012
|
Specification for service quality of recreation granges
|
|
GB/T 2893.1-2004
|
Graphical symbols -- Safety colors and safety signs -- Part 1: workplace and public areas of the design principles of safety signs
|
|
GB/T 2893.1-2013
|
Graphical symbols -- Safety colours and safety signs -- Part 1: Design principles for safety signs and safety markings
|
|
GB/T 2893.2-2008
|
Graphical symbols -- Safety colours and safety signs -- Part 2: Design principles for product safety labels
|
|
GB/T 2893.3-2010
|
Graphical symbols -- Safety colours and safety signs -- Part 3: Design principles for graphical symbols used in safety signs
|
|
GB/T 2893.4-2013
|
Graphical symbols -- Safety colours and safety signs -- Part 4: Colorimetric and photometric properties of safety sign materials
|
|
GB/T 28930-2012
|
Hygienic requirements of computer usage for students
|
|
GB/T 28933-2012
|
General evaluation elements of professional managers
|
|
GB/T 28934-2012
|
Training specification for professional managers
|
|
GB/T 28935-2012
|
Assembled swimming pool
|
|
GB/T 28939-2012
|
Assembled padding for swimming pool
|
|
GB/T 28940-2012
|
Sampling procedure of vector infected by pathogens -- Rodent
|
|
GB/T 28941-2012
|
Sampling procedure of vector infected by pathogens -- Mosquito
|
|
GB/T 28942-2012
|
Sampling procedure of vector infected by pathogens -- Flea
|
|
GB/T 28943-2012
|
Principle and guideline of risk assessment of vectors -- Rodent
|
|
GB/T 28944-2012
|
Vector surveillance and control in emergencies -- Flood disaster
|
|
GB/T 28945-2012
|
Portable braking performance tester for vehicles
|
|
GB/T 28946-2012
|
Mobile motorcycle safety technology inspection lane
|
|
GB/T 28947-2012
|
Ships and marine technology -- Marine evacuation systems -- Means of communication
|