GB/T 28878.7-2016 English PDFUS$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 28878.7-2016: Specification of the rotating component in space science experiments -- Part 7: Reliability test Status: Valid
Basic dataStandard ID: GB/T 28878.7-2016 (GB/T28878.7-2016)Description (Translated English): Specification of the rotating component in space science experiments -- Part 7: Reliability test Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: V22 Classification of International Standard: 49.035 Word Count Estimation: 14,141 Date of Issue: 2016-08-29 Date of Implementation: 2016-11-01 Regulation (derived from): National Standard Announcement 2016 No.14 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 28878.7-2016: Specification of the rotating component in space science experiments -- Part 7: Reliability test---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Specification of the rotating component in space science experiments - Part 7. Reliability test ICS 49.035 V22 National Standards of People's Republic of China Specification for rotating parts of space science experiment Part 7. Reliability tests Part 7. Reliabilitytest 2016-08-29 released 2016-11-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Management Committee released Directory Preface I 1 Scope 1 2 normative reference document 1 3 Experimental Classification and Project 1 3.1 Overview 1 3.2 Test items 2 4 Test requirements 2 4.1 Test component identification 2 4.2 Test site 2 4.3 Test procedure 2 4.4 Technical status 3 4.5 Fault handling 3 4.6 modification, rework and retest 3 5 test content 3 5.1 Routine reliability test 3 5.2 high and low temperature start test 3 5.3 Vacuum cold welding test 4 5.4 Life Verification Test 4 Appendix A (informative) Space Science Experiment Rotating Parts Life Verification Tests Statistical and Reliability Parameter Estimates 6 Reference 11 ForewordGB/T 28878 "space science experimental rotating parts specification" is divided into the following 10 parts. - Part 1. Design principles; - Part 2. Lubrication design requirements; - Part 3. Rolling bearing acceptance; - Part 4. acceptance of lubricants; - Part 5. Motor acceptance; - Part 6. Performance testing; - Part 7. Reliability testing; Part 8. Assembly; - Part 9. Delivery; - Part 10. Storage reinspection. This part is part 7 of GB/T 28878. This part is drafted in accordance with the rules given in GB/T 1.1-2009. This part is headed by the National Committee for the Standardization of Space Science and Its Application (SAC/TC312). This part of the drafting unit. Shanghai Institute of Technical Physics, Chinese Academy of Sciences. This part of the main drafters. Yang Yi, Wang Weicheng, Wang Chenfei. Specification for rotating parts of space science experiment Part 7. Reliability tests1 ScopeThis part of GB/T 28878 specifies the reliability test items, methods and procedures for the rotating parts of space science experimental installations, The condition of the test, the method of the test cycle and the implementation of the reliability test. This part is applicable to the reliability test of the ground of the rotating parts of the space science experimental device. Other payloads and spacecraft are flat The reliability test of the rotating parts of the table can be made with reference.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GJB451 reliability maintainability assurance terms Reliability identification and acceptance test3 test classification and project3.1 Overview The reliability tests involved in this section include the design (process) verification test, the initial stage or the stage of the reliability index verification test, Proof stage, or product batch stage reliability level verification test and life verification test. The planning, implementation and evaluation of the reliability test shall be consistent GJB451 and GJB899 requirements. Among them, the design (process) verification test, the initial stage or the stage of the reliability index verification test, the positive stage or product batch stage can be Reliability level test, life verification test content in Table 1. Table 1 Test classification and content Test category test content Design (craft) verification test In the design phase, the use of sampling test program, in the laboratory simulation using the task profile encountered the most harsh environment And the working conditions, that is, the identification of test conditions appropriate to tighten, apply stress. The newly developed rotary parts shall be tested and shall be tested on reliability, reliability verification and life verification Before the test. This test may be carried out in conjunction with the engineering development of the parts or the machine Initial stage or stereotypes Segment reliability index verification test In the design of the styling stage, the use of sampling test program, in the laboratory simulation using the task profile encountered the worst ring Environment and working conditions, stress applied. This test may be carried out in conjunction with the identification test of the part or the machine. When the design (process) after the change should be re-enter Line reliability test Positive stage or product batch Stage reliability level test Test During the batch production phase, a full test (100% sampling) scheme was used to simulate the use of the task profile in the laboratory To the actual environment and working conditions, to apply stress. This test may be carried out in conjunction with the verification test of the part or the machine Life verification test In the development phase, the use of sampling test program, in the laboratory simulation of the use of the task profile encountered by the actual environment and work Condition, stress applied. If necessary, the product can be sampled before and after the delivery of the product for life verification test. This test may be carried out in conjunction with the parts of the organization ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 28878.7-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 28878.7-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 28878.7-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 28878.7-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
