GB/T 28911-2012 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 28911-2012	RFQ	ASK	3 days	Vocabulary of drilling engineering for the petroleum and natural gas	Valid

Similar standards

GB/T 9711   SY/T 6996   SY/T 10025   GB/T 31033   GB/T 41029   GB/T 39421   

Basic data

Standard ID: GB/T 28911-2012 (GB/T28911-2012)
Description (Translated English): Vocabulary of drilling engineering for the petroleum and natural gas
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: E13
Classification of International Standard: 75.020
Word Count Estimation: 207,265
Regulation (derived from): National Standards Bulletin 2012 No. 28
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the oil and gas drilling engineering -specific terminology. This standard applies to oil and gas drilling engineering fields, but also applies to other areas of the oil and gas industry.

GB/T 28911-2012: Vocabulary of drilling engineering for the petroleum and natural gas

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Vocabulary of drilling engineering for the petroleum and natural gas ICS 75.020 E13 National Standards of People's Republic of China Oil and gas drilling engineering terminology Issued on. 2012-11-05 2013-03-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 Drilling Subjects 1 2 Engineering geological conditions of drilling 3 6 4 pre-drilling project 12 5 drill 15 6 drilling equipment, tools and instruments 21 7 Drilling Technology 31 8 drilling parameter optimization 37 9 47 directional drilling 10 Coring Drilling 57 11 drilling and completion fluid 63 12 78 Oil and Gas Well Pressure Control 13 downhole drilling failure and treatment 89 14 cementing and completion 96 122 15 Oil drilling technology economy 16 126 Ocean Drilling Project References 137 Index 139

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the National Standardization Technical Committee of Oil and Gas (SAC/TC355) and focal points. This standard was drafted. China University of Petroleum (East China), Shengli Petroleum Administration Drilling Technology Research Institute, China Oilfield Services Limited Shares the company. The main drafters of this standard. tube Chi Chuan, Liaohua Lin, SHI Yu Cai, Yan Xin new, yellow root furnace, Cao Jing type, HAN Zhi-yong, Chen Ting root, Zoude Yong, Cheng distance, Liurui Wen, Zhang Weidong. Oil and gas drilling engineering terminology

1 Scope

This standard specifies the oil and gas drilling project-specific terminology. This standard applies to oil and gas drilling project in the field, also applies to other areas of the oil and gas industry.

2 drilling Subjects

2.1 Basic Concepts wells 2.1.1 Well wel In the exploration and development of oil, gas and other underground resources for the purpose, in the formation of a cylindrical drilled perforations with a certain depth. 2.1.2 Wellhead welhead Well the top open end. 2.1.3 Bottom welbottom The bottom of the wells. 2.1.4 Wall welwal Cylindrical inner wall of the wellbore. 2.1.5 Borehole welbore Shaft Wellbore A well overall. 2.1.6 Well segment welsection A section of the wellbore. 2.1.7 Naked eye openhole Unused casing, screens and other measures of well packer segment. 2.1.8 Depth measureddepth Sounding Inclined deep Transfer from disk (reference point) to the measured length of the well borehole axis between a measuring point. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 28911-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 28911-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 28911-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 28911-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.