|
Std ID |
Description (Standard Title) |
|
GB/T 4773-1984
|
Parameters of steam turbines in conventional combined heating and power stations
|
|
GB/T 754-1965
|
Specification for steam turbines
|
|
GB/T 2820.5-2025
|
Reciprocating internal combustion engine driven alternating current generating sets - Part 5: Generating sets
|
|
GB/T 28570-2025
|
Technical guide of on-line condition monitoring system for hydraulic turbine and generator units
|
|
GB/T 2820.9-2024
|
Reciprocating internal combustion engine driven alternating current generating sets - Part 9: Measurement and evaluation of mechanical vibrations
|
|
GB/T 2820.7-2024
|
Reciprocating internal combustion engine driven alternating current generating sets - Part 7: Technical declarations for specification and design
|
|
GB/T 30370-2022
|
Guide of primary frequency control test and performance acceptance for thermal power generating units
|
|
GB/T 2820.1-2022
|
Reciprocating internal combustion engine driven alternating current generating sets - Part 1: Application, ratings and performance
|
|
GB/T 2820.8-2022
|
Reciprocating internal combustion engine driven alternating current generating sets - Part 8: Requirements and tests for low-power generating sets
|
|
GB/T 12786-2021
|
General technical conditions for automatic internal combustion engine power stations
|
|
GB/T 37089-2018
|
Reciprocating internal combustion engine driven alternating current generating sets -- Controller
|
|
GB/T 32715-2016
|
Integral micro hydroturbine generator unit
|
|
GB/T 31038-2014
|
General technical condition for high voltage diesel-generating sets
|
|
GB/T 30370-2013
|
Guide of primary frequency control test and performance acceptance for thermal power generating units
|
|
GB/T 2820.11-2012
|
Reciprocating internal combustion engine driven alternating current generating sets -- Part 11: Rotary uninterruptible power systems -- Performance requirements and test methods
|
|
GB/T 28570-2012
|
Technical guide of on-line condition monitoring system for hydraulic turbine and generator units
|
|
GB/T 2820.1-2009
|
Reciprocating internal combustion engine driven alternating current generating sets -- Part 1: Application, ratings and performance
|
|
GB/T 2820.2-2009
|
Reciprocating internal combustion engine driven alternating current generating sets -- Part 2: Engines
|
|
GB/T 2820.3-2009
|
Reciprocating internal combustion engine driven alternating current generating sets -- Part 3: Alternating current generators for generating sets
|
|
GB/T 2820.4-2009
|
Reciprocating internal combustion engine driven alternating current generating sets -- Part 4: Controlgear and switchgear
|
|
GB/T 2820.5-2009
|
Reciprocating internal combustion engine driven alternating current generating sets -- Part 5: Generating sets
|
|
GB/T 2820.6-2009
|
Reciprocating internal combustion engine driven alternating current generating sets -- Part 6: Test methods
|
|
GB/T 21425-2008
|
Noise indicated requirements and test methods for low-noise electric power plant with internal combustion engine
|
|
GB/T 21426-2008
|
Special environmental condition -- Requirements for electric powerplant with internal combustion engines on plateau
|
|
GB/T 21427-2008
|
Special environmental condition -- Requirements and test methods for electric powerplant with internal combustion engines in dry heat-desert
|
|
GB/T 21428-2008
|
Reciprocating internal combustion engine driven generating sets -- Safety
|
|
GB/T 4712-2008
|
Automatic diesel generating set, requirements of classification for
|
|
GB/T 2820.10-2002
|
Reciprocating internal combustion engine driven alternating current generating sets -- Part 10: Measurement of airborne noise by the enveloping surface method
|
|
GB/T 2820.12-2002
|
Reciprocating internal combustion engine driven alternating current generating sets -- Part 12: Emergency power supply to safety services
|
|
GB/T 2820.7-2002
|
Reciprocating internal combustion engine driven alternating current generating sets -- Part 7: Technical declarations for specification and design
|
|
GB/T 2820.8-2002
|
Reciprocating internal combustion engine driven alternating current generating set -- Part 8: Requirements and tests for low-power generating sets
|
|
GB/T 2820.9-2002
|
Reciprocating internal combustion engine driven alternating current generating sets -- Part 9: Measurement and evaluation of mechanical vibrations
|
|
GB/T 2820.1-1997
|
Reciprocating internal combustion engine driven alternating current generating sets. Part 1: Application, ratings and performance
|
|
GB/T 2820.2-1997
|
Reciprocating internal combustion engine driven alternating current generating sets. Part 2: Engines
|
|
GB/T 2820.3-1997
|
Reciprocating internal combustion engine driven alternating current generating sets. Part 3: Alternating current generators for generating sets
|
|
GB/T 2820.4-1997
|
Reciprocating internal combustion engine driven alternating current generating sets. Part 4: Controlgear and switchgear
|
|
GB/T 2820.5-1997
|
Reciprocating internal combustion engine driven alternating current generating sets. Part 5: Generating sets
|
|
GB/T 2820.6-1997
|
Reciprocating internal combustion engine driven alternating current generating sets. Part 6: Test methods
|
|
GB/T 4712-1996
|
Automatic diesel generating set, requirements of classification
|
|
GB/T 2819-1995
|
Mobile electric power plant, general specification for
|
|
GB/T 14024-1992
|
Limits and methods of measurement of radio interference characteristics of electric power plant with internal combustion engines. Conducted interference
|
|
GB/T 12786-1991
|
Automatic diesel generating sets for general specification
|
|
GB/T 2820-1990
|
Diesel generating sets of 50Hz for general specification
|
|
GB/T 30372-2024
|
Guide for acceptance of distributed control system for thermal power plant
|
|
GB/T 2317.4-2023
|
Test method for electric power fittings - Part 4: Acceptance inspection
|
|
GB/T 2315-2017
|
Specified failure load series and coupling dimensions for electric power fittings
|
|
GB/T 11920-2008
|
General specification of central control equipment and system for electrical parts in power stations and substations
|
|
GB/T 2315-2008
|
Nominal failing load series and coupling dimensions for electric power fittings
|
|
GB/T 2317.1-2008
|
Test method for electric power fittings -- Part 1: Mechanical tests
|
|
GB/T 2317.2-2008
|
Test method for electric power fittings -- Part 2: Corona and RIV tests for electric power fittings
|
|
GB/T 2317.3-2008
|
Test method for electric power fittings -- Part 3: Heat cycle tests for electric power fittings
|
|
GB/T 2317.4-2008
|
Test method for electric power fittings -- Part 4: Acceptance inspection for electric power fittings
|
|
GB/T 2694-2003
|
Transmission line tower -- Technical requirements for manufacturing
|
|
GB/T 2338-2002
|
Requirements and tests for overhead line spacers
|
|
GB/T 2315-2000
|
Nominal failure load electric power fittings series and coupling dimensions
|
|
GB/T 2317.1-2000
|
Electric Power Fitting mechanical test methods
|
|
GB/T 2317.2-2000
|
Electric power fittings corona and radio interference test
|
|
GB/T 2317.3-2000
|
Electric power with thermal cycling test methods
|
|
GB/T 2317.4-2000
|
Electric power fittings acceptance rules, marking and packaging
|
|
GB/T 2336-2000
|
Technical requirements for damper
|
|
GB/T 2695-1996
|
Titanium and titanium alloy bars
|
|
GB/T 2315-1985
|
Fittings nominal failing load series and coupling dimension
|
|
GB/T 2317-1985
|
Fittings acceptance inspection, test methods, marking and packing
|
|
GB/T 2336-1985
|
Damper
|
|
GB/T 2337-1985
|
Preformed armour rods
|
|
GB/T 2338-1985
|
Spacer
|
|
GB/T 5075-1985
|
Terminology for electric power fitting
|
|
GB/T 7253-1987
|
The string insulator units of the cap and pin type--Dimensions and characteristics
|
|
GB/T 775.2-1987
|
Test method for insulators--Part 2: Electrical test methods
|
|
GB/T 8411.1-1987
|
Porcelain insulating material for electrical applications--Part 1: Definition, classification and properties
|
|
GB/T 8411.2-1987
|
Porcelain insulating material for electrical applications--Part 2: Test methods
|
|
GB/T 3969-1983
|
Porcelain bushing shell for transformer up to 35kV
|
|
GB/T 32520-2024
|
Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a. c. systems above 1 kV
|
|
GB/T 28182-2024
|
Surge arresters containing series gapped structures with rated voltage 52 kV and less
|
|
GB/T 22389-2023
|
Metal-oxide surge arresters without gaps for HVDC converter stations
|
|
GB/T 28547-2023
|
Selection and application recommendations of metal oxide surge arresters for a. c. systems
|
|
GB/T 11032-2020
|
Metal-oxide surge arresters without gaps for a. c. systems
|
|
GB/T 33588.1-2017
|
Lightning protection system components (LPSC) -- Part 1: Requirements for connection components
|
|
GB/T 33588.2-2017
|
Lightning protection system components (LPSC) -- Part 2: Requirements for conductors and earth electrodes
|
|
GB/T 33588.3-2017
|
Lightning protection system components (LPSC) -- Part 3: Requirements for isolating spark gaps (ISG)
|
|
GB/T 33588.4-2017
|
Lightning protection system components (LPSC) -- Part 4: Requirements for conductor fasteners
|
|
GB/T 33588.5-2017
|
Lightning protection system components (LPSC) -- Part 5: Requirements for earth electrode inspection housings and earth electrode seals
|
|
GB/T 33588.7-2017
|
Lightning protection system components (LPSC) -- Part 7: Requirements for low resistivity mixture for earthing
|
|
GB/T 34869-2017
|
Metal-oxide varistor for the protection of series compensation capacitor banks sets
|
|
GB/T 32520-2016
|
Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of ac. systems above 1 kV
|
|
GB/T 33350.6-2016
|
Lightning protection system components (LPSC) -- Part 6: Requirements for lightning strike counters (LSC)
|
|
GB/T 33588.6-2016
|
Lightning protection system components (LPSC) -- Part 6: Requirements for lightning strike counters (LSC)
|
|
GB/T 28547-2012
|
Selection and application recommendations of metal oxide surge arresters for a.c. systems
|
|
GB/T 28182-2011
|
Surge arresters containing series gapped structures with rated voltage 52 kV and less
|
|
GB/T 25083-2010
|
Metal-oxide surge arresters without gaps for ±800kV UHVDC systems
|
|
GB/T 22389-2008
|
Guidelines of metal oxide surge arresters without gaps for HVDC converter stations
|
|
GB/T 2900.12-2008
|
Electrotechnical terminology -- Surge arresters, low-voltage surge protective devices and components
|
|
GB/T 7327-2008
|
Silicon carbide surge arresters for a.c. systems
|
|
GB/T 18802.321-2007
|
Components for low-voltage surge protective devices -- Part 321: Specifications for avalanche breakdown diode (ABD)
|
|
GB/T 18802.331-2007
|
Components for low-voltage surge protective devices -- Part 331: Specification for metal oxide varistors (MOV)
|
|
GB/T 18802.341-2007
|
Components for low-voltage surge protective devices -- Part 341: Specification for thyristor surge suppressors (TSS)
|
|
GB/T 20639-2006
|
Artificial pollution testing of non-linear resistor type gapped arresters
|
|
GB/T 2900.12-1989
|
Electrotechnical terminology--Surge arrester
|
|
GB/T 44179-2024
|
Composite hollow core station post insulators with a. c. voltage greater than 1 000 V and d. c. voltage greater than 1 500 V - Definitions, test methods and acceptance criteria
|
|
GB/T 4585-2024
|
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a. c. systems
|