|
Std ID |
Description (Standard Title) |
|
GB/T 12796.2-2012
|
Permanent ferrite magnets -- Part 2: Sectional specification for permanent ferrite magnets for use in micromotors
|
|
GB/T 12798-2012
|
Axial lead cores made of magnetic oxides or iron powder
|
|
GB/T 28864.2-2012
|
Terms and nomenclature for cores made of magnetically soft ferrites -- Part 2: Reference of dimensions
|
|
GB/T 28868-2012
|
Dimensions of uncoated ring cores of magnetic oxides
|
|
GB/T 28869.1-2012
|
Cores made of soft magnetic materials -- Measuring methods -- Part 1: Generic specification
|
|
GB/T 9630-2012
|
Dimensions of pot-cores made of magnetic oxides and associated parts
|
|
GB/T 9633-2012
|
Measuring methods for properties of gyromagnetic materials intended for application at microwave frequencies
|
|
GB/T 20872-2007
|
Dimensions of low-profile cores made of magnetic oxides
|
|
GB/T 20873-2007
|
PM-cores made of magnetic oxides and associated parts -- Dimensions
|
|
GB/T 9634.4-2007
|
Ferrite cores -- Guide on the limits of surface irregularities -- Part 4: Ring-cores
|
|
GB/T 19404-2003
|
Microwave ferrite components -- Measuring methods for major properties
|
|
GB/T 9634.1-2002
|
Ferrite cores -- Guide on the limits of surface irregularities -- Part 1: General specification
|
|
GB/T 9634.2-2002
|
Ferrite cores -- Guide on the limits of surface irregularities -- Part 2: RM-cores
|
|
GB/T 9634.3-2002
|
Ferrite cores -- Guide on the limits of surface irregularities -- Part 3: ETD-cores and E-cores
|
|
GB/T 17951-2000
|
General technical conditions of hard magnetic materials
|
|
GB/T 13888-1992
|
Methods of measurement of the coercivity of magnetic materials in an open magnetic circuit
|
|
GB/T 12796-1991
|
Generic specification for permanent ferrite magnets
|
|
GB/T 12797-1991
|
Sectional specification for permanent ferrite magnets for use in micromotors
|
|
GB/T 12798-1991
|
Axial lead cores made of magnetic oxides or iron powder
|
|
GB/T 11433-1989
|
Dimensions of tubes, pins and rods of ferromagnetic oxides
|
|
GB/T 11435-1989
|
Ferrite cores for AC erasing heads
|
|
GB/T 11436-1989
|
Chemical analysis methods for products and semifinished products made of soft ferrite materials
|
|
GB/T 11437-1989
|
Ferrite cores used in broadcast receiver aerials--Sectional specification
|
|
GB/T 11438-1989
|
Ferrite cores used in broadcast receiver aerials--Blank detail specification--Assessment level A
|
|
GB/T 9623-1988
|
Inductor and transformer cores for telecommunications. Part 1: Generic specification
|
|
GB/T 9624-1988
|
Inductor and transformer cores for telecommunications. Part 2: sectional specification: Magnetic oxide cores for inductor applications
|
|
GB/T 9625-1988
|
Inductor and transformer cores for telecommunications. Part 2: Blank detail specification: Magnetic oxide cores for inductor applications. Assessment level A
|
|
GB/T 9626-1988
|
Inductor and transformer cores for telecommunications. Part 3: Sectional specification: Magnetic oxide cores for broad-band transformers
|
|
GB/T 9627-1988
|
Inductor and transformer cores for telecommunications. Part 3: Blank detail specification: Magnetic oxide cores for broad-band transformers. Assessment levels A and B
|
|
GB/T 9628-1988
|
Inductor and transformer cores for telecommunications. Part 4: sectional specification: Magnetic oxide cores for transformers and chokes for power applications
|
|
GB/T 9629-1988
|
Inductor and transformer cores for telecommunications. Part 4: Blank detail specification: Magnetic oxide cores for transformers and chokes for power applications. Assessment level A
|
|
GB/T 9630-1988
|
Dimensions of pot-cores made of magnetic oxides and associated parts
|
|
GB/T 9633-1988
|
Measuring methods for properties of gyromagnetic materials intended for application at microwave frequencies
|
|
GB/T 9634-1988
|
Guide to the specification of limits for physical imperfections of parts made from magnetic oxides
|
|
GB/T 9635-1988
|
Measuring methods for aerial rods
|
|
GB/T 9636-1988
|
Aerial rods and slabs made of magnetic oxides
|
|
GB/T 11387-2008
|
Test methods for the properties of piezoelectric ceramics -- Test for the static flexural strength
|
|
GB/T 20874-2007
|
Calculation of the effective parameters of magnetic piece parts
|
|
GB/T 3388-2002
|
Designations for types of piezoelectric ceramics
|
|
GB/T 3389.3-2001
|
Piezoelectric ceramic material performance test method Curie temperature TC test
|
|
GB/T 3241-1998
|
Octave-band and fractional-octave-band filters
|
|
GB/T 12864-1997
|
Piezoelectric ceramic filters for use in electronic equipment. A specification in the quality assessment system for electronic components. Part 2: Sectional specification. Qualification approval
|
|
GB/T 12865-1997
|
Piezoelectric ceramic filters for use in electronic equipment. A specification in the quality assessment system for electronic components. Part 2: Sectional specification. Qualification approval. Section 1: Blank detail specification. Assessment level
|
|
GB/T 17190-1997
|
Piezoelectric ceramic filters for use in electronic equipment. A specification in the quality assessment system for electronic components. Part 1: Generic specification. Qualification approval
|
|
GB/T 15287-1994
|
Complete filter units for radio interference suppression. Part 1: Generic specification
|
|
GB/T 15288-1994
|
Complete filter units for radio interference suppression. Part 2: Sectional specification. Selection of methods of test and general requirements
|
|
GB/T 13423-1992
|
Criteria for the evaluation of software used for industry control
|
|
GB/T 12864-1991
|
Piezoelectric ceramic filters for use in electronic equipment--Sectional specification for piezoelectric ceramic filters for AM radios
|
|
GB/T 12865-1991
|
Piezoelectric ceramic filters for use in electronic equipment--Blank detail specification for piezoelectric ceramic filters for use in AM radios--Assessment E
|
|
GB/T 12866-1991
|
Piezoelectric ceramic filters for use in electronic equipment--Sectional specification for piezoelectric ceramic filters for communication equipment
|
|
GB/T 12867-1991
|
Piezoelectric ceramic filters for use in electronic equipment--Blank detail specification for piezoelectric ceramic filters for communication equipment--Assessment level E
|
|
GB/T 11387-1989
|
Testing methods for static flexural strength of piezoelectric ceramics
|
|
GB/T 3389.7-1986
|
Test methods for the properties of piezoelectric ceramics--Test for dielectric properties in high electric field
|
|
GB/T 3389.8-1986
|
Test methods for the properties of piezoelectric ceramics--Test for the pyroelectric coefficient
|
|
GB/T 3351-1982
|
Designations for synthetic quartz crystals
|
|
GB/T 3388-1982
|
Designations for types of piezoelectric ceramics
|
|
GB/T 3389.2-1982
|
Test methods for the properties of piezoelectric ceramics--Static test for piezoelectric strain constant d33
|
|
GB/T 3389.3-1982
|
Test methods for the properties of piezoelectric ceramics--Test for Curie temperature Tc
|
|
GB/T 3389.4-1982
|
Test methods for the properties of piezoelectric ceramics--Longitudinal length extension vibration mode for rod
|
|
GB/T 40853.2-2023
|
High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converters
|
|
GB/T 40852.1-2021
|
High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment
|
|
GB/T 40853.1-2021
|
High frequency inductive components - Electrical characteristics and measuring method - Part 1: Nanohenry range chip inductor
|
|
GB/T 11441.1-2012
|
Laminations for transformers and inductors for use in telecommunication and electronic equipment -- Part 1: Mechanical and electrical characteristics
|
|
GB/T 14860.1-2012
|
Transformers and inductors for use in electronic and telecommunication equipment -- Part 1: Generic specification
|
|
GB/T 14860.3-2012
|
Transformers and inductors for use in electronic and telecommunication equipment -- Part 3: Sectional specification for power transformers on the basis of the capability approval procedure
|
|
GB/T 14860.4-2012
|
Transformers and inductors for use in electronic and telecommunication equipment -- Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure
|
|
GB/T 15290-2012
|
Generic specification of power supply transformers and filter chokes for use in electronic equipment
|
|
GB/T 28864.1-2012
|
Terms and nomenclature for cores made of magnetically soft ferrites -- Part 1: Terms used for physical irregularities
|
|
GB/T 4596-2012
|
E-cores for three-phase transformers for use in electronic equipment
|
|
GB/T 11441.2-2011
|
Laminations for transformers and inductors for use in telecommunication and electronic equipment -- Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials
|
|
GB/T 18909-2002
|
Sectional specification for high-frequency inductors and intermediate frequency transformers for use in electronic equipment for capability approval
|
|
GB/T 9632.1-2002
|
Measurement methods of communication Inductor and transformer cores
|
|
GB/T 8554-1998
|
Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
|
|
GB/T 14006.2-1997
|
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipmemt Part 2: Transformers and inductors using YEx-2 laminations for printed wiring board mounting
|
|
GB/T 14006.3-1997
|
Outline dimensions of transformers and inductors for use in telecommunition and electronic equipment Part 3: Transformers and inductors using YUI-1 laminations
|
|
GB/T 16512-1996
|
Fixed inductors for radio interference suppression. Part 1: Generic specification
|
|
GB/T 16513-1996
|
Fixed inductors for radio interference suppression. Part 2: Sectional specification. Selection of methods of test and general requirements
|
|
GB/T 15183-1994
|
Sectional Specification for power transformers for use in electronic equipment for capability approval
|
|
GB/T 15184-1994
|
Sectional specification for power transformers for switched mode power supplies (SMPS) for use in electronic equipment for capability approval
|
|
GB/T 15290-1994
|
Generic specification of power supply-transformers and filter chokes for use in electronic equipment
|
|
GB/T 14860-1993
|
Generic specification for transformers and inuctors for use in telecommunication and electronic equipment
|
|
GB/T 14006-1992
|
Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Part 1: Transformers and inductors using YEI-1 laminations
|
|
GB/T 11441-1989
|
Laminations for transformers and inductors for use in telecommunication and electronic equipment
|
|
GB/T 9632-1988
|
Measuring methods of cores for inductors and transformers for telecommunications
|
|
GB/T 8554-1987
|
Measuring methods and test procedures for transformers and inductors for use in electronic and telecommunication equipment
|
|
GB/T 4596-1984
|
E-cores for three-phase transformers used in electronic equipment
|
|
GB/T 42747-2023
|
Superconducting strip photon detector - Dark count rate
|
|
GB/T 43199-2023
|
Test specification for robot multi-axis force/torque sensor
|
|
GB/T 6663.1-2007
|
Directly heated negative temperature coefficient thermistors -- Part 1: Generic specification
|
|
GB/T 7154.1-2003
|
Directly heated positive step-function temperature coefficient thermistors -- Part 1-1: Blank detail specification for current limiting application Assessment level EZ
|
|
GB/T 7154.2-2003
|
Thermistors directly heated positive step-function temperature coefficient -- Part 1-2: Blank detail specification Heating element application Assessment level EZ
|
|
GB/T 7154.3-2003
|
Thermistors Directly heated positive step-function temperature coefficient -- Part 1-3: Blank detail specification Inrush current application Assessment level EZ
|
|
GB/T 7154.4-2003
|
Thermistors Directly heated positive step-function temperature coefficient -- Part 1-4: Blank detail specification Sensing application Assessment level EZ
|
|
GB/T 18806-2002
|
General specification for the resistance strain pressure transducer/sensor
|
|
GB/T 7153-2002
|
Directly heated positive step-function temperature coefficient thermistors -- Part 1: Generic specification
|
|
GB/T 13823.18-1997
|
Methods for the calibration of vibration and shock pick-ups. Primary vibration calibration by reciprocity method
|
|
GB/T 10194-1997
|
Varistors for use in electronic equipment. Part 2: Sectional specification for surge suppression varistors
|
|
GB/T 10195.1-1997
|
Varistors for use in electronic equipment. Part 2: Blank detail specification for silicon carbide surge suppression varistors. Assessment level E
|
|
GB/T 10195.2-1997
|
Varistors for use in electronic equipment. Part 2: Blank detail specification for zinc oxide surge suppression varistors. Assessment level E
|
|
GB/T 13823.17-1996
|
Methods for the calibration of vibration and shock pick-ups. Testing of acoustic sensitivity
|