GB/T 14860.3-2012 English PDF

US$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14860.3-2012: Transformers and inductors for use in electronic and telecommunication equipment -- Part 3: Sectional specification for power transformers on the basis of the capability approval procedure
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 14860.3-2012	259	Add to Cart	3 days	Transformers and inductors for use in electronic and telecommunication equipment -- Part 3: Sectional specification for power transformers on the basis of the capability approval procedure	Valid

Similar standards

GB/Z 40842   GB/T 36103.1   SJ/T 10410   GB/T 40853.2   GB/T 40852.1   GB/T 14860.1   

Basic data

Standard ID: GB/T 14860.3-2012 (GB/T14860.3-2012)
Description (Translated English): Transformers and inductors for use in electronic and telecommunication equipment -- Part 3: Sectional specification for power transformers on the basis of the capability approval procedure
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L17
Classification of International Standard: 29.100.10
Word Count Estimation: 11,128
Older Standard (superseded by this standard): GB/T 15183-1994
Quoted Standard: GB/T 2423.5-1995; GB/T 2423.6-1995; GB/T 2423.10-2008; GB/T 2423.22-2002; GB/T 2423.28-2005; GB/T 2828.1-2003; GB/T 8554-1998; GB/T 14860.1-2012; IEC 60068-2-21-1992; IEC QC 001004; ISO 128-1982; ISO 129-1985
Adopted Standard: IEC 61248-3-1996, MOD
Regulation (derived from): National Standards Bulletin No. 41 of 2012
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the Press GB/T 14860. 1-2012 provides the ability to release the power transformer approval procedures detailed specification methodology. This section includes Blank detail specification (BDS). Blank detail specification of the fo

GB/T 14860.3-2012: Transformers and inductors for use in electronic and telecommunication equipment -- Part 3: Sectional specification for power transformers on the basis of the capability approval procedure

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Transformers and inductors for use in electronic and telecommunication equipment Part 3. Sectional specification for power transformers on the basis of the capability approval procedure ICS 29.100.10 L17 National Standards of People's Republic of China Replacing GB/T 15183-1994 Electronic and telecommunication equipment transformers and inductors Part 3. Evaluation of the capability approval procedure Quality specification for power transformers equipment-Part 3. Sectionalspecificationforpowertransformersonthebasis (IEC 61248-3.1996, MOD) Issued on. 2013-06-01 2012-12-31 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 14860 "in electronic and telecommunication equipment - transformers and inductors for" approval procedure is based on the ability to assess the quality of the electronic and communications equipment Transformers and inductors standard, divided into the following sections. --- Part 1. Generic specification; --- Part 2. Evaluation of the capability approval procedure quality specification for signal transformers; --- Part 3. Evaluation of the capability approval procedure quality specification for power transformers; --- Part 4. Evaluation of the quality of the capability approval procedure switch specification for power transformers; --- Part 5. Evaluation of the capability approval procedure quality specification for pulse transformers; --- Part 6. the capability approval procedure inductors of assessed quality specification; --- Part 7. Evaluation of the quality of the capability approval procedure of the high-frequency inductors and intermediate frequency transformers. This section GB/T 14860 Part 3. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part replaces GB/T 15183-1994 "according to the approved capacity of assessed quality electronic equipment specification for power transformers." Section compared with the GB/T 15183-1994 The main changes are as follows. --- Standard number has been adjusted by the GB/T 15183 to the GB/T 14860.3; --- Added some references, references were made to refine part of the standard file and the corresponding part of the standard (See Chapter 2); --- In the preparation of "detailed specification" clause, the increase in the case of using the instructions (see Chapter 5); --- Rating capacity of the approved range of references by the "GB/T 14860-1993 of 1.9" to "GB/T 14860.1- 2012 4.6; --- Blank detail specification (BDS) downsizing of five; the first one to add additional rules, performance and other manufacturers address and so on. The partial modification using IEC 61248-3.1996 "electronic and telecommunication equipment transformers and inductors - Part 3. the capability approval process Sequence quality assessment specification for power transformers "(in English). For ease of use, this section of IEC 61248-3.1996, with minor modifications. Its main content is to modify the IEC 61248-3. IEC 60068 Environmental testing standards referenced in 1996 using our corresponding GB/T 2423 national standards instead. Further, also IEC 60410. 1973 "counter check sampling plan and procedures" with the GB/T 2828.1-2003 "Sampling procedures for inspection - Part 1. Press Acceptance quality limit (AQL) retrieval batch inspection sampling plan "instead. For ease of use, this section of IEC 61248-3.1996 also made the following editorial changes. --- "Normative references", the guide word according to GB/T 1.1-2009 requirements; --- References in some of the standard replaced by the use of international standards to national standards or industry standards; --- Deleted the reference document IEC 102 Guide. 1989, IEC QC001001. 1986, IEC QC001002. 1986, IEC QC001005 other standards; --- The "IEC 68-2-21" to "IEC 60068-2-21"; --- Remove the IEC standard foreword. This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This part of the National Magnetic components and ferrite materials Standardization Technical Committee (SAC/TC89) centralized. This section is drafted. Guangdong Dongguan Dazhong Electronic Co., Ltd. The main drafters of this section. Jane Lee, do-industry. This part of the standard replaces the previous editions are. --- GB/T 15183-1994. Electronic and telecommunication equipment transformers and inductors Part 3. Evaluation of the capability approval procedure Quality specification for power transformers

1 Scope

This section GB/T 14860 specifies the press GB/T 14860.1-2012 provisions of the capability approval procedure to release the details of the power transformer Fine Specification Methodology. This section includes a blank detail specification (BDS). Blank detail specification format and points suitable for this type of element Test piece; and the final selection included checklists trial by the authors of the specification decisions. This specification also provides a corresponding amount Value and characteristics. This section provides the fundamental frequency components and maximum transmission power substantially symmetrical waveform under relevant.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock (Idt IEC 60068-2-27. 1987) GB/T 2423.6-1995 Environmental testing for electric and electronic products Part 2. Test methods - Test Eb and guidance. Bump (Idt IEC 60068-2-29. 1987) GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) (IEC 60068-2-6.1995, IDT) GB/T 2423.22-2002 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change (IEC 60068-2-14. 1984, IDT) GB/T 2423.28-2005 Environmental testing for electric and electronic products Part 2. Test methods - Test T. Soldering (IEC 60068- 2-20. 1979, IDT) GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample Programme (ISO 2859-1.1999, IDT) GB/T 8554-1998 electronic and telecommunication equipment transformers and inductors Measuring methods and test procedures (idt IEC 61007. 1994) GB/T 14860.1-2012 electronic and telecommunication equipment transformers and inductors - Part 1. Generic specification (IEC 61248-1. 1996, MOD) IEC 60068-2-21.1992 Environmental testing for electric and electronic products Part 2. Test methods - Test U. Robustness of terminations and integral security Loading intensity (Environmentaltesting-Part 2-21. Tests-TestU Robustnessofterminationsandintegral mountingdevices) IEC QC001004 Quality Assessment System for Electronic Components (IEC Q) specification list (Specificationslist) ISO 128. 1982 Technical drawings - basic principles (Technicaldrawings-Generalprinciplesofpresentation) ISO 129. 1985 Technical drawings Dimensions basic principles, definitions, painting and special labeling (Technicaldrawings-Dimensio- ning-Generalprinciples, definitions, methodsofexecutionandspecialindications) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14860.3-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14860.3-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14860.3-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14860.3-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.