GB/T 9630-2012 English PDF

US$254.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 9630-2012: Dimensions of pot-cores made of magnetic oxides and associated parts
Status: Valid

GB/T 9630: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 9630-2012	254	Add to Cart	3 days	Dimensions of pot-cores made of magnetic oxides and associated parts	Valid
GB/T 9630-1988	479	Add to Cart	3 days	Dimensions of pot-cores made of magnetic oxides and associated parts	Obsolete

Similar standards

GB/Z 40842   GB/T 36103.1   SJ/T 10410   GB/T 43795   GB/T 9634.8   GB/T 9633   

Basic data

Standard ID: GB/T 9630-2012 (GB/T9630-2012)
Description (Translated English): Dimensions of pot-cores made of magnetic oxides and associated parts
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: L19
Classification of International Standard: 29.100.10
Word Count Estimation: 13,168
Older Standard (superseded by this standard): GB/T 9630-1988
Quoted Standard: GB/T 20874-2007
Adopted Standard: IEC 60133-2000, IDT
Regulation (derived from): National Standards Bulletin 2012 No. 28
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the preferred series made ??of magnetic oxides and mechanical interchangeability pot cores of important size, and used in conjunction with the core limit size bobbin. Appendix A gives the general design of the series of core princi

GB/T 9630-2012: Dimensions of pot-cores made of magnetic oxides and associated parts

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS29.100.10 L19 National Standards of People's Republic of China GB/T 9630-2012/IEC 60133.2000 Replacing GB/T 9630-1988 Pot cores made of magnetic oxides Size and its annexes (IEC 60133.2000, IDT) Issued on. 2013-02-15 2012-11-05 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Basic requirements 1 3.1 size pot core 1 3.1.1 Main dimensions 1 3.1.2 lead ditch 3 3.1.3 valid parameter values \u200b\u200b3 Main dimensions 3.2 bobbin 4 Appendix A (informative) design pot core 6 Export Annex B (informative) Standard 7 Annex C (informative) test according to IEC basic standard pot core size standard gauge Example 8 C.1 General 9 C.2 procedures and requirements 9 GB/T 9630-2012/IEC 60133.2000

Foreword

Rules of the criteria based on GB/T 1.1-2009 given draft. This standard replaces GB/T 9630-1988 "magnetic oxide cores made of the size of the pot and its annex." Compared with GB/T 9630-1988, core size miniaturization trend direction for the development of this standard according to the current domestic and international magnetism Heart actual production and application, the new four categories smaller pot core, and removed the P42/29 core; deleted Appendix B tank Examples of standard coil-shaped cores skeleton size; for different cores to gauge the size requirements were added. This standard uses the translation method is equivalent to using IEC 60133.2000 "made of magnetic oxides size pot core and its annex." And IEC 60133. Compared to 2000, the standard made the following editorial changes. --- The "Normative references" in the international standard in place by the national standards; --- With a decimal point instead of the IEC standard as decimal point ",". ","; --- With "φA", "φE", "φF", "φH", "φe", "φf" instead of the IEC standard "A", "E", "F", "H", "e" , "f", table Display size in diameter; --- Remove the original IEC standard "Preface." The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This standard by the national magnetic components and ferrite materials Standardization Technical Committee (SAC/TC89) centralized. This standard was drafted. Day-Holding Co., Ltd. The main drafters of this standard. Shao Feng, Tang Jie, Sun Jiang Ping. This standard was first published in 1988, this is the first revision. GB/T 9630-2012/IEC 60133.2000 Pot cores made of magnetic oxides Size and its annexes

1 Scope

This standard specifies the preferred series pot core and critical dimensions of machinery and interchangeability made of magnetic oxides, as well as a core From the use of bobbin size limit. Appendix A gives the general principles of the design of the core of the series.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 20874-2007 calculate the magnetic component of the effective parameters (IEC 60205.2001, IDT)

3 Basic requirements

Core shall meet the following requirements to ensure that the entire assembly and bobbin mechanical interchangeability. 3.1 pot core dimensions 3.1.1 Main dimensions The main dimensions of the tank-shaped cores shall comply with the provisions in Table 1 and Table 2. 1 No tank-shaped cores main dimension drawing GB/T 9630-2012/IEC 60133.2000 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 9630-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 9630-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 9630-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 9630-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 9630-2012?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 9630-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.